Coutellerie Maria - Folding Knife - Canif - XC75 - 85mm - Colored Handle w/ Brass Liners

Brand: Hitohira ひとひら 
Made in: Seki, Gifu - Japan 
Line: HG
Profile: Santoku
Edge Length: 185mm
Blade Height: 45mm
Edge Steel: Unclassified Stainless
Steel Type: Stainless Steel
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Tsuchime Damascus 
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous  
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 196mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 135mm
Total Length: 330mm
Weight: 136g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片)
Producing Area: Sakai-Osaka/ Japan
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi
Line: Togashi Honyaki
Profile: Yanagiba
Edge Length: 288mm
Blade Height: 35mm
Edge Steel: White #1 
Steel Type: Carbon
Construction: Mizu Honyaki
Cladding: N/A
Finish: Sanbonsugi
Bevel: Single
Bevel Symmetry:  0/100 
Hand Orientation: Right Handed
Handle Shape: Octagonal 
Handle Material: Kurokaki Persimmon
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 305mm
Thickness of Spine at Handle: 4.2mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 145mm
Total Length: 450mm
Weight: 239g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: Echizen 
Profile: Yanagiba
Edge Length: 203mm
Blade Height: 31mm
Edge Steel: Blue #2
Steel Type: Carbon
Construction: Awase/Clad, Ni Mai
Cladding: Soft Iron
Finish: Damascus
Bevel: Single
Bevel Symmetry:  0/100 
Hand Orientation: Right Handed
Handle Shape: D-Shaped
Handle Material: Rosewood
Ferrule/Bolster Material: Pakka
Spine Length: 213mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 130mm
Total Length: 342mm
Weight: 120g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand:  Hitohira ひとひら
Made in: Seki-Gifu/ Japan
Line: KH
Profile: Petty
Edge Length: 150mm
Blade Height: 30mm
Edge Steel: Unclassified Stainless Steel  
Steel Type: Stainless Steel  
Construction: Mono-Steel
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 30:70
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Ho Wood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 283mm
Spine Length: 162mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 121mm
Weight: 55g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Echizen
Profile: Gyuto 
Edge Length: 212mm
Blade Height: 50.2mm
Edge Steel: SG2
Steel Type: Stainless Steel
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Keyaki Zelkova
Ferrule/Bolster Material: Pakka
Spine Length: 228mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 140mm
Total Length: 370mm
Weight: 156g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.