Safe Storage, Care + Extras

Strata gift cards!

Gift cards purchased online are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.

***We are experiencing a technical issue with gift cards on our mobile site where you are only able to add $10 gift cards to your shopping cart. We are working to get this resolved asap! If you are running into this problem and are able to make the purchase on a laptop or desktop we would recommend doing so (we are not experiencing this issue on this platform). Otherwise, please reach out to us at info@strataportland.com and we will help finalize the order via email. (updated September 2024)

If you want us to mail a physical gift card or want to purchase a gift card in a custom dollar amount we would be happy to help! Just reach out to us at info@strataportland.com to coordinate.

Length: 266mm

Outside Width: 70mm

Weight: 140g

***The internal width of this guard will fit knives with a blade height up to 55mm***

If you have any questions or concerns about fitting your knife with a blade guard don't hesitate to reach out to us before ordering!

Length: 257g

Outside Width: 48mm

Weight: 89g

***The internal width of this guard will fit knives with a blade height up to 36mm***

If you have any questions or concerns about fitting your knife with a blade guard don't hesitate to reach out to us before ordering!

Length: 175mm

Outside Width: 42mm

Weight: 45g

***The internal width of this guard will fit knives with a blade height up to 17mm***

If you have any questions or concerns about fitting your knife with a blade guard don't hesitate to reach out to us before ordering!

Brand: Edro
Made In: Brunswick, Maine, USA
Material: Poplar
Profile: Gyuto
Total Length: 260mm
Internal Length: 236mm
Total Height: 62mm
Internal Height: 51mm
Total Thickness: 10.5mm
Internal Thickness: 3.7mm
Weight: 45g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Edro
Made In: Brunswick, Maine, USA
Material: Poplar
Profile: Santoku
Total Length: 212mm
Internal Length: 192mm
Total Height: 61mm
Internal Height: 54mm
Total Thickness: 11mm
Internal Thickness: 3.6mm
Weight: 48g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

A wooden pin used to fasten saya. It is slightly tapered. A drill bit or file of appropriate width must be used to fasten the hole, ideally thinner than the actual width of the pin to assure a tight fit.

Brand: Hitohira
Line: WB
Made In: Japan
Material: Wood
Shaft Length: 14mm
Shaft Width At Head: 4mm
Shaft Width at End: 3.8mm
Head Length: 5mm
Head Width: 7.2mm
Total Length: 19.5mm
Weight: 1g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

From Hitohira:

HI-CONDITION is headquartered in Asakusabashi. This area of Tokyo was famous as ‘the city of textile and leather craftsmen’ but now there are fewer people carrying on that tradition. Hi-CONDITION strives to keep that tradition alive with an attention to detail and quality that honors the history of Taito.

They began as a creative hub and gallery where artists exhibited their artwork and apparel, this included HI-CONDITION's own stencil art. As the gallery progressed, the brand HI-CONDITION was born, incorporating a network of craftsman with their years of art experience into a range of premium apparel, bags kitchen wear and accessories.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Edro
Made In: Brunswick, Maine, USA

Material: Poplar

Profile: Nakiri

Total Length: 209mm

Internal Length: 188mm

Total Height: 69.5mm

Internal Height: 59.6mm

Total Thickness: 11.3

Internal Thickness: 3.5mm

Weight: 55g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Edro
Made In: Brunswick, Maine, USA
Material: Poplar
Profile: Gyuto
Total Length: 288mm
Internal Length: 263mm 
Total Height: 68.5mm
Internal Height: 56mm
Total Thickness: 11mm
Internal Thickness: 3.6mm
Weight: 58g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

This Aburatsubo is a modern interpretation of a traditional japanese oil applicator. Traditionally, the Aburatsubo consisted of cotton wadding, soaked in Tsubaki oil, contained within a bamboo pot. Tools were dipped into the cotton wadding while working, or pieces of wadding were taken between the fingers to apply oil to larger tools. The modern version is much the same, but with the addition of a wick in the cap to apply oil without needing to oil ones fingers. 

Tsubaki oil, also known as camelia oil, is both highly stable and food safe. It is ideal for use on carbon steel knives to prevent corrosion. You may be sparing with it, as not much is needed to create a working protective layer. Too much oil on the surface can attract dirt and particulate. 

Brand: Edro
Made In: Brunswick, Maine, USA
Material: Poplar
Profile: Petty
Total Length: 207mm
Internal Length: 180mm
Total Height: 44mm
Internal Height: 32mm
Total Thickness: 11.5mm
Internal Thickness: 3.7mm
Weight: 32g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

We use this religiously! A powerful cleaning solution that removes tarnish, rust, water stains, lime deposits, oxidation, fingerprints, etc. It’s non toxic (no gloves are necessary), contains no ammonia (so it doesn’t smell!), is non abrasive so it doesn’t scratch, and is effective on a whole bunch of surfaces besides steel.

To use, shake well, apply a small amount to the surface (do not let dry), buff with a cotton pad or cloth, and rinse off.

These 9 Pocket Knife rolls have 8 slots for kitchen knives and 1 zipper pocket for small items.

HI-CONDITION is headquartered in Asaksabashi. This area of Tokyo was famous as ‘the city of textile and leather craftsmen’ but now there are fewer people carrying on that tradition. Hi-CONDITION strives to keep that tradition alive with an attention to detail and quality that honors the history of Taito.

They began as a creative hub and gallery where artists exhibited their artwork and apparel, this included HI-CONDITION's own stencil art. As the gallery progressed, the brand HI-CONDITION was born, incorporating a network of craftsman with their years of art experience into a range of premium apparel, bags kitchen wear and accessories.

Brand: HI-CONDITION ハイコンディション
Maker: Yuji Osada 長田 勇次
Producing Area: Tokyo/ Japan
Product Type: Knife Roll
Size: 9 Pockets 
Material: Hanpu Canvas
Length of Knife Pocket: 32.5cm
Dimensions Open: 89cm

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Edro
Made In: Brunswick, Maine, USA
Material: Poplar
Profile: Petty
Total Length: 189mm
Internal Length: 165mm
Total Height: 43mm
Internal Height: 30mm
Total Thickness: 11.5mm
Internal Thickness: 3.4mm
Weight: 26g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Length: 65mm
Width: 40mm
Height: 10mm
Weight: 40g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Measurements are for the inside of the Saya, these measurements should be larger than your knives measurements.

Total Internal Length: 250mm

Height at Opening: 55mm

Width of Opening at Spine: 2.9mm

Width of Opening at Edge: 1.9mm

*These Measurements were taken from one sample, there might be slight variations in each one*

Measurements are for the inside of the Saya, these measurements should be larger than your knives measurements.

Total Internal Length: 196mm

Height at Opening: 51mm

Width of Opening at Spine: 2.7mm

Width of Opening at Edge: 1.7mm

*These Measurements were taken from one sample, there might be slight variations in each one*

Brand: Edro
Made In: Brunswick, Maine, USA
Material: Poplar
Profile: Sujihiki
Total Length: 317mm
Internal Length: 292mm
Total Height: 56mm
Internal Height: 45mm
Total Thickness: 11mm
Internal Thickness: 4mm
Weight: 56g
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Edro
Made In: Brunswick, Maine, USA
Material: Poplar 
Profile: Gyuto
Total Length: 289mm
Internal Length: 265mm
Total Height: 68mm
Internal Height: 55mm
Total Thickness: 11.5mm
Internal Thickness: 4.4mm
Weight: 59g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.