Petty/Utility

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Petty
Edge Length: 127mm 
Blade Height: 36mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 140mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 113mm
Total Length: 252mm
Weight: 115g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Petty/Utility
Edge Length: 158mm
Blade Height: 40mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 162mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 110mm
Total Length: 276mm
Weight: 123g
Saya/Guard: Sold separately, available here

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Petty/Utility
Edge Length: 158mm
Blade Height: 40mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 162mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 110mm
Total Length: 276mm
Weight: 123g
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Utility/Chef
Edge Length: 201mm
Blade Height: 45mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 210mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 110mm
Total Length: 323mm
Weight: 143g
Saya/Guard: Sold separately, available here

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Utility/Chef
Edge Length: 201mm
Blade Height: 45mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 210mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 110mm
Total Length: 323mm
Weight: 143g
Saya/Guard: Sold separately, available here

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Utility/Chef
Edge Length: 201mm
Blade Height: 45mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 210mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 110mm
Total Length: 323mm
Weight: 143g
Saya/Guard: Sold separately, available here

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Utility/Chef
Edge Length: 201mm
Blade Height: 45mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 210mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 110mm
Total Length: 323mm
Weight: 143g
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: FJ
Made in: Seki, Gifu - Japan 
Profile: Petty/Utility
Edge Length: 153mm 
Blade Height: 29mm 
Edge Steel: VG-10
Steel Type: Stainless
HRC: 60±0.5HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Mikgaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 156mm
Thickness of Spine at Handle: 1.2mm
Thickness ½ way: 0.9mm
Thickness ~1cm from Tip: 0.1mm
Handle Length: 105mm 
Total Length: 260mm 
Weight: 85g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Made in:  Seki-Gifu/ Japan
Line: FJ VG10
Profile: Kiritsuke Petty
Edge Length: 146mm
Blade Height: 30mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Convex
Finish: Migaki/Standard
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia
Ferrule/Bolster Material: Black Buffalo Horn
Total Length: 275mm
Spine Length: 155mm
Thickness of Spine at Handle: 1.4mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 121mm
Weight: 55g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Seki-Gifu, Japan
Line: FJ
Profile: Petty/Utility
Edge Length: 154mm
Blade Height: 30mm
Edge Steel: VG-10 
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 40/60
Hand Orientation: Right-Handed
Handle Shape: Octagonal 
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length:.163mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6
Thickness ~1cm from Tip: 0.9mm
Handle Length: 124mm
Total Length: 287mm
Weight: 61g
Saya/Guard: Sold Separately

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: Imojiya TH
Profile: Petty
Edge Length: 148mm
Blade Height: 29.5mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A Mono-Steel
Finish: Migaki (standard)
Bevel: Double Bevel (asymmetric)
Bevel Symmetry: 40/60
Hand Orientation: Ambidextrous
Handle Shape: Western (yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 148mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: .2mm
Handle Length: 115mm
Total Length: 257mm
Weight: 88mm
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Stainless

This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic

Brand: K Sabatier
Line: Auvergne
Made in: Thiers - France
Profile: Petty/Utility
Edge Length: 160mm
Blade Height: 24mm
Edge Steel: Z50C13
Steel Type: Stainless
HRC: 55-57
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Coral Wood
Ferrule/Bolster Material: Stainless Steel
Spine Length: 160mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 112mm
Total Length: 272mm
Weight: 110g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Morihei 森平
Made in: Japan
Line: Hisamoto Inox
Profile: Petty/Utility
Edge Length: 123mm
Blade Height: 27mm
Edge Steel: SUS-440
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Finish: Migaki (Standard)
Bevel: Double Bevel
Bevel Symmetry: 40/60
Hand Orientation: Right Handed
Handle Shape: Western (Yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 127mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: .5mm
Handle Length: 104mm
Total Length: 230mm
Weight: 71g
Saya/Guard: Sold Separately 

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care Advisement: Stainless

This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Morihei 森平
Made in: Japan
Line: Hisamoto Inox
Profile: Petty/Utility
Edge Length: 151mm
Blade Height: 29mn
Edge Steel: SUS-440
Steel Type: Stainles
Construction: Zenko (Mono-Steel)
Finish: Migaki (Standard)
Bevel: Double Bevel
Bevel Symmetry: 40/60
Hand Orientation:Right Handed
Handle Shape: Western (Yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 155mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.2mm
Thickness ~1cm from Tip: .6mm
Handle Length: 111mm
Total Length: 265mm
Weight: 82g
Saya/Guard: Sold Separately 

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care Advisement: Stainless

This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Morihei 森平
Made in: Tokyo - Japan
Line: Hisamoto - White #1 (Kurouchi)
Profile: Petty/Utility
Edge Length: 148mm
Blade Height: 35mm
Edge Steel: Shirogai #1 (White #1)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Kurouchi (Forge Finish)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Spine Length: 150mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 114mm
Total Length: 164mm
Weight: 120g
Saya/Guard: Sold Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care Advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守 
Line: Signed Super Blue
Made in: Osaka, Sakai — Japan
Smith: Tanaka  田中
Profile: Petty/Utility
Edge Length: 141mm
Blade Height: 29mm
Edge Steel: Aogami Super (Super Blue)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: All Mirror (Kyomen)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 151mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 125mm
Total Length: 276mm
Weight: 92g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Vachon Knives
Smith: Noah Vachon
Sharpener: Noah Vachon
Made in: Tomifobia, Quebec
Profile: Kiritsuke Gyuto
Edge Length: 220mm
Blade Height: 53mm
Edge Steel: AEB-L
Steel Type: Stainless
Construction: Mono-Steel
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry, Copper Ferrule 
Total Length: 360mm
Spine Length: 200m
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.6mm
Thickness ~1cm from Tip: 0.1mm
Handle Length: 127mm
Weight: 165g
Saya/Guard:  Purchased Separately

Brand: Vachon Knives
Smith: Noah Vachon
Sharpener: Noah Vachon
Made in: Tomifobia, Quebec
Profile: Kiritsuke Petty
Edge Length: 260mm
Blade Height: 36mm
Edge Steel: AEB-L
Steel Type: Stainless
Construction: Mono-Steel
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry, Copper Ferrule 
Total Length: 185mm
Spine Length: 150m
Thickness of Spine at Handle: 2.4mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.1mm
Handle Length: 115mm
Weight: 165g
Saya/Guard:  Sold Separately

Brand: Windmühlenmesser
Made in: Germany
Line: Buckel
Profile: Buckel/Utility
Edge Length: 115mm
Blade Height: 20mm
Edge Steel: Undisclosed Stainless
Steel Type: Stainless
Construction: Mono-Steel
Finish: Standard
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Cherry
Ferrule/Bolster Material: N/A
Spine Length: 115mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 105mm
Total Length: 220mm
Weight: 35g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Stainless

This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Windmühlenmesser
Line: Buckel Fehrekampf 
Made In: Solingen - Germany
Profile: Buckel/Utility
Edge Length: 115mm
Blade Height: 20mm
Steel: Proprietary Stainless
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Fine Glazed
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle: Walnut
Total Length: 220mm
Spine Length: 115mm
Thickness at Spine: 1.3mm
Thickness ½ way: 1.3mm
Thickness ~1 cm from Tip: 1.3mm
Handle Length: 105mm
Weight: 48g
Saya/Guard: Comes with leather sheath and gift box

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care Advisement: Stainless

This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Windmühlenmesser
Made in: Germany
Line: Buckel
Profile: Buckel/Utility
Edge Length: 115mm
Blade Height: 20mm
Edge Steel: Undisclosed
Steel Type: Stainless
Construction: Mono-Steel
Finish: Standard
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Walnut
Ferrule/Bolster Material: N/A
Spine Length: 115mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 105mm
Total Length: 220mm
Weight: 38g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Stainless

This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.