Single Bevel

Brand: Hitohira ひとひら
Line: Hiragana 
Made in: Seki, Gifu - Japan
Profile: Deba 
Edge Length: 182mm 
Blade Height: 53mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka 
Ferrule/Bolster Material: N/A
Spine Length: 188mm 
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 4.4mm
Thickness ~1cm from Tip: 2.6mm

Handle Length: 117mm  
Total Length: 306mm
Weight: 297g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Made In: Seki-Gifu, Japan
Line: Hiragana
Profile: Deba
Edge Length: 112mm
Blade Height: 64mm
Edge Steel: AUS-8
Steel Type: Stainless
Cladding: N/A
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right Handed
Handle: Western Pakka
Total Length: 335mm
Spine Length: 210mm
Thickness of Spine at Handle: 4.3mm 
Thickness ½ way: 4.0mm
Thickness ~1cm from Tip: 3.6mm
Handle Length: 124mm
Weight: 358g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: Stainless Steel
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally betwxeen preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: KH MV
Made in: Seki, Gifu - Japan 
Profile: Yo Deba
Edge Length: 183mm
Blade Height: 48mm 
Edge Steel: Molybdenum Vanadium 
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 188mm 
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 3.1mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 117mm 
Total Length: 305mm 
Weight: 235g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら 
Line: Kikuchiyo x Manzo
Made in: Sakai, Osaka - Japan 
Smith: Kikuchiyo 菊千代 
Sharpener: Manzō 万造
Profile: Mioroshi Deba
Edge Length: 214mm 
Blade Height: 42.5mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad), Ni Mai
Cladding: Soft Iron
Finish: Kido (diagonal pattern)
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Octagonal 
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 230mm
Thickness of Spine at Handle: 5.8mm
Thickness ½ way: 5mm
Thickness ~1cm from Tip: 2.4mm
Handle Length: 140mm
Total Length: 367mm
Weight: 250g  
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Smith: Kikuchiyo 菊千代
Profile: Deba
Edge Steel: Blue #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Single
Hand Orientation: Right Handed
Handle: Ho Wood
Total Length: 370mm
Edge Length: 215mm
Spine Length: 232mm
Blade Height: 61mm
Thickness at Spine: 8.1mm
Thickness ½ way: 7.2mm
Thickness ~1cm from Tip: 5.1mm
Handle Length: 140mm
Weight: 486g
Saya: Ho Wood

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Tanaka x Manzo
Made in: Sakai, Osaka - Japan 
Smith: Tanaka Blacksmith 田中打刃物製作所 
Sharpener: Manzō 万造
Profile: Yanagiba
Edge Length: 263mm
Blade Height: 33mm 
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad), Ni Mai
Cladding: Soft Iron
Finish: Kido (diagonal pattern)
Bevel: Single Bevel
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 274mm
Thickness of Spine at Handle: 3.8mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 143mm
Total Length: 417mm
Weight: 205g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement:This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Togashi 富樫
Sharpener: Kenya Togashi
Profile: Yanagiba
Edge Length: 318mm
Blade Height: 37mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Mizu Honyaki (Differentially Hardened)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single Bevel
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Taihei Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 335mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 2.0mm
Handle Length: 152mm
Total Length: 482mm
Weight: 285g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら 
Line: Togashi Honyaki
Made in: Sakai, Osaka -Japan
Smith: Togashi Blacksmith 富樫打刃物製作所 
Sharpener: Kenya Togashi 憲哉
Profile: Yanagiba
Edge Length: 318mm
Blade Height: 37mm 
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Honyaki (differentially hardened)
Cladding: N/A
Finish: Mirror Polish (kyomen)
Bevel: Single Bevel
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Taihei Makassar Ebony 
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 332mm
Thickness of Spine at Handle: 3.8mm
Thickness ½ way: 3.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 151mm 
Total Length: 485mm 
Weight: 290g 
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand:  Hitohira ひとひら
Made in: Sakai-Osaka, Japan 
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi 憲哉
Profile: Kiritsuke Yanagiba
Edge Length: 290mm
Blade Height: 35mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Honyaki (differentially hardened)
Cladding: N/A
Finish: Sanbonsugi Hamon
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle Shape: Octagonal 
Handle Material: Taihei Makassar Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 306mm
Thickness of Spine at Handle: 4mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 146mm
Total Length: 451mm
Weight: 212g 
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Producing Area: Sakai, Osaka - Japan 
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi
Line: Togashi Honyaki
Profile: Yanagiba
Edge Length: 288mm
Blade Height: 35mm
Edge Steel: Shirogami #1/White #1 
Steel Type: Carbon
Construction: Mizu Honyaki
Cladding: N/A
Finish: Sanbonsugi
Bevel: Single
Bevel Symmetry:  0/100 
Hand Orientation: Right Handed
Handle Shape: Octagonal 
Handle Material: Kurokaki Persimmon
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 305mm
Thickness of Spine at Handle: 4.2mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 145mm
Total Length: 450mm
Weight: 239g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Made in: Sakai, Osaka - Japan
Smith: Kenji Togashi 富樫
Sharpener: Kenya Togashi (憲哉)
Line: Mizu Honyaki
Profile: Yanagiba Sakimaru
Edge Length: 300mm
Blade Height: 35.5mm
Edge Steel: Shirogami #1/White #1 
Steel Type: Carbon
Construction: Honyaki
Cladding: N/A
Finish: Mirror Polished
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Wa 
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Total Length: 457mm
Spine Length: 315mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1mm
Handle Length: 148mm
Weight: 262g
Saya/Guard: Yes, saya included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Togashi 富樫
Sharpener: Kenya Togashi
Profile: Yanagiba
Edge Length: 312mm
Blade Height: 37mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Migaki (Standard)
Bevel: Single
Hand Orientation: Right-Handed
Handle Shape: D-Shape
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 336mm
Thickness of Spine at Handle: 4.2mm
Thickness ½ way: 4.0mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 150mm
Total Length: 486mm
Weight: 2590g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Made in: Sakai, Osaka - Japan
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi 憲哉
Line: Togashi Mizu Honyaki
Profile: Yanagiba
Edge Length: 287mm
Blade Height: 36mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Honyaki/Mono-Steel
Cladding: N/A
Finish: Etched Tanryumon
Bevel: Single, Ni-Mai
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval Octagonal
Handle Material: Kurokaki Persimmon
Ferrule/Bolster Material: Black Buffalo Horn
Spine Length: 305mm
Thickness of Spine at Handle: 3.6mm
Thickness ½ way: 3.1mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 146mm
Total Length: 450mm
Weight: 224g
Saya/Guard: Saya

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Nigara Hamono  二唐刃物鍛造所
Made in: Hirosaki, Aomori - Japan
Smith: Yoshizawa Tsuyoshi 吉澤 剛
Line: Mt. Fuji Honyaki
Profile: Kiritsuke Yanagiba
Edge Length: 288mm
Blade Height: 41.3mm
Edge Steel: Shirogami #1/White #1
Steel Type: Carbon
Construction: Honyaki (differentially hardened), Mt. Fuji Hamon
Cladding: N/A
Finish: Forced Patina, Mt. Fuji Hamono
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: N/A
Handle Material: N/A
Ferrule/Bolster Material: N/A
Total Length: 400mm (including tang)
Spine Length: 300mm
Thickness of Spine at Handle: 4.8mm
Thickness ½ way: 3.5mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: N/A
Weight: 200g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: KIKUZUKI RIN
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka  田中
Profile: Kiritsuke Santoku
Edge Length: 260mm
Blade Height: 33mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Nashiji (Textured)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 272mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 140mm
Total Length: 411mm
Weight: 177g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: Kikuzuki Uzu
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka  田中
Profile: Kiritsuke Yanagiba
Edge Length: 260mm
Blade Height: 34mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Awase (Clad); Ni Mai
Cladding: Soft Iron
Finish: Damascus (Sekiso)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 273mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 140mm
Total Length: 414mm
Weight: 163g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Smith: Satoshi Nakagawa 中川
Made in: Sakai, Osaka - Japan
Line: Nakagawa VG10 Damascus
Profile: Kiritsuke Yanagiba
Edge Length: 265mm
Blade Height: 34.5mm
Edge Steel: VG10
Steel Type: Stainless
Grind: Right-Handed Single Bevel
Construction: Awase, Ni-Mai
Cladding: Stainless Damascus
Finish: Damascus
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 417mm
Spine Length: 277mm
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 3.2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 140mm
Weight: 194g
Saya/Guard: Sold Seperately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.