in stock

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: Hiragana
Profile: Cleaver
Edge Length: 160mm
Blade Height: 87mm (heel), 113mm (tip)
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Yo (western) Handle
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 165mm
Thickness of Spine at Handle: 4.8mm
Thickness ½ way: 4.8mm
Thickness ~1cm from Tip: 4.8mm
Handle Length: 140mm
Total Length: 305mm
Weight: 830g
Saya/Guard: N/A

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: FJ
Made in: Seki-Gifu, Japan
Profile: Gyuto/Chef
Edge Length: 240mm
Blade Height: 50mm
Edge Steel: VG-10
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 242mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 120mm
Total Length: 365mm
Weight: 206g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら
Line: KH MV
Made in: Seki, Gifu - Japan
Profile: Deba
Edge Length: 183mm
Blade Height: 49mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Single
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Spine Length: 187mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 3.1mm
Thickness ~1cm from Tip: 2.5mm
Handle Length: 117mm
Total Length: 302mm
Weight: 222g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Imojiya TH
Made in: Seki, Gifu - Japan
Profile: Gyuto
Edge Length: 208mm
Blade Height: 45.8mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Finish: Migaki (standard)
Bevel: Asymmetric
Bevel Symmetry: 20:80
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: Pakka
Spine Length: 217mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 140mm
Total Length: 357mm
Weight: 151g
Saya/Guard: Sold Separately 

Brand: Hitohira ひとひら
Line: FJ VG-10
Made in: Seki, Gifu - Japan
Profile: Bunka
Edge Length: 172mm
Blade Height: 47mm
Edge Steel: VG-10
Steel Type: Stainless
HRC: 60±0.5
Construction: Zenko (Monosteel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 176mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 120mm
Total Length: 296mm
Weight: 152g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Made in: Seki-Gifu/ Japan
Line: KH
Profile: Sujihiki
Edge Length: 270mm
Blade Height: 41mm
Edge Steel: Unclassified Stainless Steel
Steel Type: Stainless 
Hardness: 60±1HRC 
Construction: Mono-steel
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 30:70
Hand Orientation: Right-Handed  
Handle Shape: D-Shape
Handle Material: Ho/Magnolia
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 287mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 145mm
Total Length: 433mm
Weight: 120g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: MOKI モキナイフ
Made In: Seki, Gifu - Japan
Style: Folding Knife
Blade Profile: Drop Point
Grind: Flat Grind
Blade Steel: AUS-8
Steel Type: Stainless
Blade Length: 70mm (Cutting edge)
Blade Height: 17mm
Blade Thickness: 2.3mm 
Blade Construction: Zenko (mono-steel)  
Opening Mechanism: Nail Nick
Locking Mechanism: Back Lock 
Handle/Scale Material: Linen Micarta (smooth)
Handle/Scale Color: Black
Blade Finish/Color: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 112mm
Total Length Open: 178mm
Total Length Closed: 103mm
Total Thickness: mm
Weight: 48g
Sheath/Clip: Belt Sheath
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Made in: Seki-Gifu/ Japan
Line: MZ Chromax
Profile: Gyuto
Edge Length: 182mm
Blade Height: 43mm
Edge Steel: V-G1
Steel Type: Semi Stainless Steel 
Construction: Awase, San Mai
Cladding: Soft Stainless Clad
Finish: Migaki 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 187mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 118mm
Total Length: 304mm
Weight: 162g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片) 
Made in: Seki-Gifu/ Japan
Line: MZ Chromax
Profile: Santoku
Edge Length: 167mm
Blade Height: 46mm
Edge Steel: V-Gin1
Steel Type: Semi Stainless Steel 
Construction: Awase, San Mai
Cladding: Soft Stainless Clad
Finish: Migaki 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 172mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 118mm
Total Length: 290mm
Weight: 163g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら 
Made in: Sakai-Osaka/ Japan 
Smith: Kikuchiyo 菊千代 
Sharpener: Rikichi 利吉
Line: Kikuchiyo x  Rikichi 
Profile: Sakai-Osaka/ Japan
Edge Length: 141mm
Blade Height: 26mm
Edge Steel: Yasuki Blue (Aogami) #2
Steel Type: Carbon
Construction: Awase/Clad, Ni-Mai
Cladding: Soft Stainless
Finish: Migaki
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed 
Handle Shape: Octagonal
Handle Material: Ho Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 154mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 131mm
Total Length: 289mm
Weight: 83g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: MOKI モキナイフ
Made In: Seki, Gifu - Japan
# In Set: 1
Blade Steel: AUS-8
Steel type: Stainless
Blade Length: 100mm
Blade Height: 9mm
Blade Construction: Zenko (mono-steel)
Bolster: Stainless
Handle Material: Linen Micarta
Handle Color: Black
Blade Finish/Color: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 100mm
Total Length: 219mm
Spine Thickness: 1.8mm
Weight: 57g
Storage: Leather Sheath

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Made in: Sakai, Osaka - Japan
Line: Tomoshibi
Profile: Deba
Edge Length: 128mm
Blade Height: 43mm
Edge Steel: Shirogami #2/White #2
Steel Type: Carbon
Construction: Awase Ni-Mai
Cladding: Soft Iron
Finish: Migaki/Standard
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right
Handle Shape: Oval
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster: Black Buffalo Horn Ferrule
Total Length: 247mmn
Spine Length: 137mm
Thickness of Spine at Handle: 6.2mm
Thickness ½ way: 5.3mm
Thickness ~1cm from Tip: 2.8mm
Handle Length: 111mm
Weight: 149g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: White #2 Migaki Tsuchime
Profile: Gyuto
Edge Length: 216mm
Blade Height: 47mm
Edge Steel: White #2
Steel Type: Carbon
Grind: Convex
Construction: Awase/Clad
Cladding: Stainless
Finish: Migaki Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry
Ferrule/Bolster Material: Ebony
Total Length: 376mm
Spine Length: 230mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 145mm
Weight: 140g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片) 
Line: Futana
Profile: Bunka
Edge Steel: Super Blue
Steel Type: Stainless-Clad Carbon
Cladding: Soft Stainless
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Octagonal Cherry Octagonal with Ebony Ferrule 
Total Length: 322mm
Edge Length: 175mm 
Spine Length:  187mm
Blade Height: 43mm
Spine Thickness: 1.8mm
Handle Length: 135mm
Weight: 157g 
Saya: Purchase Separately.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: T10
Profile: Gyuto
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 337mm
Edge Length: 212mm
Spine Length: 217mm
Blade Height: 45mm
Thickness at Spine: 1.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 117mm
Weight: 159g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Producing Area: Echizen-Fukui/ Japan
Profile: Petty
Size: 130mm
Steel Type: Stainless Steel
Steel: V10 Special, Soft Stainless Clad
Handle: Pakka Western
Total Length: 245mm
Edge Length: 134mm
Handle to Tip Length: 136mm
Blade Height: 27mm
Thickness: 1.2mm
Handle Length: 110mm
Weight: 70g
Hand Orientation: Ambidextrous
Hardness: 61-62HRC

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.