in stock

Brand: Hitohira ひとひら (一片)
Line: KH
Made in: Seki, Gifu - Japan 
Profile: Nakiri/Vegetable
Edge Length: 184mm 
Blade Height: 49mm 
Edge Steel: Unclassified
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed 
Handle Shape: Western
Handle Material: Imitation Mahogany
Ferrule/Bolster Material: Stainless Steel
Spine Length: 188mm 
Thickness of Spine at Handle: 1.4mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 120mm 
Total Length: 308mm 
Weight: 196g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: Hizen
Made in: Saga - Japan
Profile: Ajikiri 
Edge Length: 105mm
Blade Height: 36mm 
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Kurouchi (Forge Finish)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 117mm 
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 114mm 
Total Length: 230mm 
Weight: 68g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: Hizen
Made in: Saga - Japan
Profile: Ajikiri 
Edge Length: 148mm 
Blade Height: 35mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Kurouchi (Forge Finish)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 158mm 
Thickness of Spine at Handle: 3.0mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 115mm 
Total Length: 273mm
Weight: 80g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Kepler Customs
Made in: Portland, Maine
Smith: Jordan Kepler
Profile: Petty/Utility
Edge Length: 115mm
Blade Height: 34mm
Edge Steel: 80CrV2
Steel Type: Carbon
Construction: Zenko (mono-steel)
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Rosewood
Spine Length: 130mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 140mm
Total Length: 270mm
Weight: 100g
Saya/Guard: Not Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Fontenille Pataud
Made In: Thiers - France
Line: Laguiole Traditional
Style: Folding
Blade Profile: Clip Point
Grind: Flat
Blade Steel: 12c27   
Steel Type: Stainless
Edge Length: 99mm
Blade Height: 17.6
Blade Thickness: 2.7
Blade Construction: Mono-steel 
Frame Construction: Scaled
Opening Mechanism: Nail Nick 
Locking Mechanism: Slip Joint
Washers/Pivot System: Nylon 
Bolster: Stainless Steel
Pommel: Stainless Steel  
Spacer/Spring: Stainless Steel
Handle/Scale Material: Bamboo
Handle/Scale Color: Natural Wood
Blade Finish/Color: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle Length: 120mm
Total Length Open: 220mm
Total Length Closed: 120mm
Total Thickness: 15.5mm
Weight: 87g
Sheath/Clip: Leather Sleeve
Lanyard Hole: N/A

French folding knives tend to be measured from their handle length (not their edge length).

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Fontenille Pataud
Made In: Thiers - France
Line: Laguiole Traditional
Style: Folding
Blade Profile: Clip Point
Grind: Flat
Blade Steel: 12c27   
Steel Type: Stainless
Edge Length: 85mm
Blade Height: 16.3mm
Blade Thickness: 2.6mm 
Blade Construction: Mono-steel 
Frame Construction:  Scaled
Opening Mechanism: Nail Nick 
Locking Mechanism: Slip Joint
Washers/Pivot System: Nylon 
Bolster: Stainless Steel
Pommel: Stainless Steel  
Spacer/Spring: Stainless Steel
Handle/Scale Material: Buffalo Horn Bark
Handle/Scale Color: Black and brown
Blade Finish/Color: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle Length: 108mm 
Total Length Open: 200mm
Total Length Closed: 110mm
Total Thickness: 19.8mm 
Weight: 81g
Sheath/Clip: Leather Sleeve
Lanyard Hole: N/A

French folding knives tend to be measured from their handle length (not their edge length).

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: K Sabatier
Line: Proxus 
Made in: Thiers - France
Profile: Bread
Edge Length: 205mm
Blade Height: 39mm
Edge Steel: Z50C13
Steel Type: Stainless
HRC: 54-56
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Satin/Brushed
Bevel: Asymmetric 
Bevel Symmetry: N/A Serrated
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: POM
Ferrule/Bolster Material: Stainless Steel
Spine Length: 195mm
Thickness of Spine at Handle: 3.2mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 11omm
Total Length: 329mm
Weight: 170g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Mizuno 水野製作所
Made In: Sanjo, Niigata - Japan
Line: Warikomi Bakin Axe
Smith: Mizuno Seisakusho 水野製作所
Sharpener: Mizuno Seisakusho 水野製作所
Style: Bakin
Steel: Undisclosed Carbon
Steel Type: Carbon
Edge Length: 103mm
Blade Height: 133mm
Blade Thickness: 22.8mm
Blade Construction: Awase, Warikomi
Blade Finish/Color: Kurouchi (forge finish)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Bolster: N/A
Pommel: N/A
Handle/Tang Construction: Wedged Full Tang 
Handle Material: Shou Sugi Ban Oak
Handle Length: 297mm
Total Length: 332mm
Weight: 811g
Sheath/Clip:  Leather Edge Guard

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hakuto

Medium hardness, they are ideal for creating softer bevel changes and finishing full convex grinds. Given the available grits are only medium to high grit, Hakuto 1 stones are best left for use after initial, coarser work has been completed. 

Recommended for advanced users.

These thin (2.5mm) options are more affordable than the standard thickness (3.5mm) but will still sharpen for a very long time.

Brand: NSK
Length: 200mm
Width: 75mm
Height: 22mm
Weight: 610g
Grit Range: #10000 

Brand: Hitohira ひとひら
Line: KH MV
Made in: Seki, Gifu - Japan
Profile: Deba
Edge Length: 184mm
Blade Height: 48mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 183mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 3.5mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 115mm
Total Length: 302mm
Weight: 238g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: Hiragana
Profile: Cleaver
Edge Length: 160mm
Blade Height: 87mm (heel), 113mm (tip)
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Yo (western) Handle
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 165mm
Thickness of Spine at Handle: 4.8mm
Thickness ½ way: 4.8mm
Thickness ~1cm from Tip: 4.8mm
Handle Length: 140mm
Total Length: 305mm
Weight: 830g
Saya/Guard: N/A

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: HG
Profile: Gyuto
Edge Length: 216mm
Blade Height: 46mm
Edge Steel: Undisclosed Stainless Steel
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Stainless Damascus
Finish: Damascus
Bevel: Double (Symmetrical)
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 226mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: .3mm
Handle Length: 145mm
Total Length: 370mm
Weight: 148g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Netherton Foundry
Made In: Shropshire, England
Materials: Spun Iron
Outer Diameter: 14"
Inner Diameter: 12"
Thickness: 2mm
Height: 1.75"
Handle Width: 3 1/3"
Pan Weight: 2.00 kg

Details:

• Double handled for easy handling and takes up less space on the hob and in the oven
• Pre-seasoned with flax oil for a natural non-stick finish
• Perfect for range stoves, open fires, wood burning ovens, electric, gas, ceramic,  induction (Heat up slowly to keep flat).
• Heat up slowly at first
• Don't drop hot pans into cold water. 

Brand: Hitohira ひとひら
Line: FJ
Made in: Seki-Gifu, Japan
Profile: Gyuto/Chef
Edge Length: 240mm
Blade Height: 50mm
Edge Steel: VG-10
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 242mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 120mm
Total Length: 365mm
Weight: 206g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら
Line: KH MV
Made in: Seki, Gifu - Japan
Profile: Deba
Edge Length: 183mm
Blade Height: 49mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Double
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Pakka
Spine Length: 187mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 3.1mm
Thickness ~1cm from Tip: 2.5mm
Handle Length: 117mm
Total Length: 302mm
Weight: 222g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand:  MOKI モキナイフ
Made In: Seki, Gifu - Japan
Line: Banff
Style: Fixed Blade
Profile: Drop Point
Grind: Flat Grind
Blade Steel: VG-10 
Steel Type: Stainless
Blade Length: 86mm
Blade Height: 12.5mm
Blade Thickness: 2.6mm
Blade Construction: Zenko (mono-steel)
Handle/Tang Construction: Full Tang
Bolster: N/A
Pommel: N/A
Handle Material: Linen Micarta
Handle Color: Black
Blade Finish/Color: Mirror Polish
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 98mm
Total Length: 190mm
Weight: 78g 
Sheath/Clip: Leather sheath included
Lanyard Hole: Yes

Brand: Mizuno 水野製作所
Made In: Sanjo, Niigata - Japan
Line: Warikomi Bakin Axe
Smith: Mizuno Seisakusho 水野製作所
Sharpener: Mizuno Seisakusho 水野製作所
Style: Bakin
Steel: Undisclosed Carbon
Steel Type: Carbon
Edge Length: 102mm
Blade Height: 130mm
Blade Thickness: 23.3mm
Blade Construction: Awase, Warikomi
Blade Finish/Color: Kurouchi (forge finish)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Bolster: N/A
Pommel: N/A
Handle/Tang Construction: Wedged Full Tang 
Handle Material: Shou Sugi Ban Oak
Handle Length: 325mm
Total Length: 360mm
Weight: 821g
Sheath/Clip:  Leather Edge Guard

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Flattening Stones

Although all NSK stones are very wear resistant, these flattening/dressing stones are specifically formulated to counter the wear resistance and flatten at an impressive speed. They also work very well on natural stones as well, and the higher grit flattening plates will leave a scratch-free surface unlike many other diamond plates. The flattening stones are slotted to eliminate suction when rubbing against the sharpening stone.

If needed, coarser flattening grits can initially be used on higher grit sharpening stones to remove material quickly, as long as you condition the surface of the sharpening stone with a higher grit flattening plate before use in order to prevent overly-aggressive surface. Each grit of the flattening stones can be used on several different grits, so there is no need to get every single flattening grit for each corresponding grits of NSK sharpening stone you may have; see recommended grit ranges for each flattening stone below.

Flattening grits: 200, 400, 600, 1000, 3000, 6000

Recommended Use: Flattening grits from 200-1000 can be used on All NSK sharpening stones up to 1500 grit. All NSK sharpening stones with grits above 1000 should ideally be flattened with a grit as close to the stone's grit as possible. For example, a 3000 grit sharpening stone should be flattened with grits 3000 and above.

Brand: NSK
Length: 200mm
Width: 75mm
Height: 17mm
Weight: 519g
Grit Range: #200

Brand: MOKI モキナイフ
Made In: Seki, Gifu - Japan
# In Set: 1
Blade Steel: AUS-8
Steel type: Stainless
Blade Length: 100mm
Blade Height: 9mm
Blade Construction: Zenko (mono-steel)
Bolster: Stainless
Handle Material: Linen Micarta
Handle Color: Black
Blade Finish/Color: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 100mm
Total Length: 219mm
Spine Thickness: 1.8mm
Weight: 57g
Storage: Leather Sheath

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Coutellerie Maria
Made In: Saint-Laurent-du-Var - France
Line: Canif
Style: Folding
Blade Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: 14C28N
Steel Type: Stainless
Blade Length: 85m
Blade Height: 19.2mm
Blade Construction: Mono-Steel
Frame Construction: Scaled
Opening Mechanism: Two-Handed Pinch
Locking Mechanism: N/A, Slip Joint
Spacer/Spring: Stainless
Handle/Scale Material: Stainless
Handle/Scale Color: Multicolor
Blade Finish/Color: Satin
Bevel: Double 
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 110mm
Total Length Open: 195mm
Total Length Closed: 110mm
Spine Thickness: 1.6mm
Weight: 84g
Sheath/Clip: N/A
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.