Brand: Hitohira ひとひら (一片)
Line: FJ
Profile: Gyuto
Edge Steel: SG2
Steel Type: Stainless
Cladding: Nickle Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 330mm
Edge Length: 208mm
Spine Length: 210mm
Blade Height: 45mm
Thickness at Spine: 1.9mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 120mm
Weight: 197g
You may also like
Brand: Hitohira ひとひら (一片)
Line: Futana
Profile: Gyuto
Edge Length: 216mm
Edge Steel: Ginsanko (S3)
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry Wa
Total Length: 377mm
Spine Length: 230mm
Blade Height: 47mm
Thickness at Spine: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.6
Handle Length: 144mm
Weight: 156g
Saya/Guard: N/A
Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.
Brand: Hitohira
Profile: Gyuto
Edge Steel: AUS-8
Steel Type: Stainless
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 343mm
Edge Length: 210mm
Spine Length: 225mm
Blade Height: 34mm
Thickness at Spine: 1.6mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 120mm
Weight: 159g
Saya/Guard: No
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.
Line: Imojiya VG-10
Smith: Seto 瀬戸
Producing Area: Seki-Gifu/ Japan
Profile: Gyuto
Edge Length: 210mm
Edge Steel: VG-10
Steel Type: Stainless
Hardness: 60-61HRC
Cladding: Stainless Tsuchime Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka & Pakka Ferrule Octagonal
Total Length: 342mm
Spine Length: 220mm
Blade Height: 46mm
Thickness: 2.4mm
Handle Length: 122mm
Weight: 175g
Saya/Guard: No
Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.
Line: Imojiya ST
Profile: Santoku
Steel: VG-10
Steel Type: Stainless
Cladding: Soft Stainless
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Wa
Total Length: 310mm
Edge Length: 180mm
Spine Length: 190mm
Handle Length: 122mm
Blade Height: 49mm
Thickness: 2.2mm
Weight: 164g
Saya/Guard: N/A
CARE ADVISEMENTS
This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.
Brand: Hitohira ひとひら (一片)
Line: Imojiya ST
Profile: Santoku
Edge Length: 170mm
Hardness: 59±1HRC
Steel Type: Stainless
Steel: VG-10
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Wa
Total Length: 296mm
Spine Length: 173mm
Handle Length: 123mm
Blade Height: 47mm
Thickness at Spine: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.4mm
Weight: 176g
Saya/Guard: Purchased Separately
CARE ADVISEMENTS
This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.
Measurements are for the inside of the Saya, these measurements should be larger than your knives measurements.
Total Internal Length: 230mm
Height at Opening: 51.5mm
Width of Opening at Spine: 3.3mm
Width of Opening at Edge: 2.1mm
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.