Under $100

K Sabatier - Auvergne - Stainless - 5 1/2" Boning Knife - Western Corol Handle

$85.00

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Boning
Edge Length: 151mm
Blade Height: 24mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 265mm
Spine Length: 149mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.0mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 109mm
Weight: 108g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

K Sabatier - Auvergne - Stainless - 5 1/2" Boning Knife - Western Corol Handle

Hitohira - Hiragana - 120mm Deba - Pakka Handle - No Bolster

$60.00

Brand: Hitohira ひとひら (一片)
Made In: Seki-Gifu, Japan
Line: Hiragana
Profile: Deba
Edge Length: 111mm
Blade Height: 43mm
Edge Steel: AUS-8
Steel Type: Stainless
Cladding: N/A
Bevel: Single
Bevel Symmetry: 100/0
Hand Orientation: Right Handed
Handle: Western Pakka
Total Length: 225mm
Spine Length: 120mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 3.7mm
Thickness ~1cm from Tip: 3.1mm
Handle Length: 107mm
Weight: 169g
Saya/Guard: Purchased Separately

Hitohira - Hiragana - 120mm Deba - Pakka Handle - No Bolster

K Sabatier - Proxus - Stainless Steel - 8" Chef Knife - POM Western Handle

$95.00

Brand: K Sabatier
Made in: Thiers - France
Line: Proxus
Profile: Chef
Edge Length: 213mm
Blade Height: 47mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: Stainless
Total Length: 345mm
Spine Length: 210mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 123mm
Weight: 260g
Saya/Guard: Sold Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

K Sabatier - Proxus - Stainless Steel - 8" Chef Knife - POM Western Handle

Hitohira - Hiragana - 150mm Deba - Pakka Handle - No Bolster

$70.00

Brand: Hitohira ひとひら (一片)
Made In: Seki-Gifu, Japan
Line: Hiragana
Profile: Deba
Edge Length: 150mm
Blade Height: 55mm
Edge Steel: AUS-8
Steel Type: Stainless
Cladding: N/A
Bevel: Single
Bevel Symmetry: 100/0
Hand Orientation: Right Handed
Handle: Western Pakka
Total Length: 276mm
Spine Length: 160mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 4.0mm
Thickness ~1cm from Tip: 3.6mm
Handle Length: 116mm
Weight: 260g
Saya/Guard: Purchased Separately

Hitohira - Hiragana - 150mm Deba - Pakka Handle - No Bolster

Windmühlenmesser - K2 - Stainless - 105mm Utility - Black POM Handle

$90.00

Brand: Windmuhlenmesser
Profile: Utility
Steel Type: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Black POM
Total Length: 224mm
Edge Length: 105mm
Spine Length: 112mm
Blade Height: 33mm
Thickness at Spine: 1.2mm
Thickness ½ way: 1.1mm
Thickness ~1 cm from Tip: 0.3mm
Handle Length: 112mm
Weight: 50g

Windmühlenmesser - K2 - Stainless - 105mm Utility - Black POM Handle

Windmühlenmesser - Buckel - Stainless - 115mm Table Utility Knife - Ice Beech Handle

$45.00

Brand: Windmuhlenmesser
Profile: Buckel
Steel Type: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Ice Beach Wood
Total Length: 220mm
Edge Length: 115mm
Spine Length: 115mm
Blade Height: 20mm
Thickness at Spine: 1.3mm
Thickness ½ way: 1.3mm
Thickness ~1 cm from Tip: 1.3mm
Handle Length: 105mm
Weight: 37g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Windmühlenmesser - Buckel - Stainless - 115mm Table Utility Knife - Ice Beech Handle

K Sabatier - Auvergne - Stainless - 8" Fillet - Western Corol Handle

$95.00

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Fillet
Edge Length: 203mm
Blade Height: 30mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 325mm
Spine Length: 204mm
Thickness of Spine at Handle: 0.8mm
Thickness ½ way: 0.2mm
Thickness ~1cm from Tip: 0.1mm
Handle Length: 116mm
Weight: 134g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

K Sabatier - Auvergne - Stainless - 8" Fillet - Western Corol Handle

K Sabatier - Auvergne - 5" Tomato Knife - Western Corol Handle

$65.00

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Tomato Knife
Edge Length: 121mm
Blade Height: 21mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 228mm
Spine Length: 123mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 101mm
Weight: 85g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

K Sabatier - Auvergne - 5" Tomato Knife - Western Corol Handle

K Sabatier - 18" Saber/Machete - Carbon Steel - Wood Handle

$65.00

Brand: K Sabatier
Made In: Thiers, France
Line: Machete
Profile: Machete
Edge Length: 450mm
Blade Height: 34mm
Steel Type: Carbon
Cladding: N/A
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Box Wood
Total Length: 598mm
Spine Length: 450mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 3.2mm
Thickness ~1cm from Tip: 3.1mm
Handle Length: 145mm
Weight: 396g
Saya/Guard: N/A

K Sabatier - 18" Saber/Machete - Carbon Steel - Wood Handle

Windmühlenmesser - K3 - Stainless - 125mm Utility - Black POM Handle

$95.00

Brand: Windmuhlenmesser
Profile: Utility
Steel Type: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Black POM
Total Length: 240mm
Edge Length: 125mm
Spine Length: 125mm
Blade Height: 28mm
Thickness at Spine: 1.3mm
Thickness ½ way: 1.1mm
Thickness ~1 cm from Tip: 0.8mm
Handle Length: 110mm
Weight: 57g

Windmühlenmesser - K3 - Stainless - 125mm Utility - Black POM Handle

Windmühlenmesser - K1 - Stainless - 90mm Utility - POM Handle

$75.00

Brand: Windmuhlenmesser
Profile: Paring
Steel Type: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: POM
Total Length: 205mm
Edge Length: 90mm
Spine Length: 90mm
Blade Height: 18mm
Thickness at Spine: 1.3mm
Thickness ½ way: 1.2mm
Thickness ~1 cm from Tip: 0.8mm
Handle Length: 115mm
Weight: 48g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Windmühlenmesser - K1 - Stainless - 90mm Utility - POM Handle

K Sabatier - Old Butcher - 12" Slicer - Semi-Flex - Rosewood Handle

$65.00

Brand: K Sabatier
Made in: Thiers - France
Line: Old Butcher
Profile: Butcher
Edge Length: 300mm
Blade Height: 27mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Old Butcher)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Total Length: 430mm
Spine Length: 302mm
Thickness of Spine at Handle: 0.9mm
Thickness ½ way: 0.7mm
Thickness ~1cm from Tip: 0.2mm
Handle Length: 129mm
Weight: 118g
Saya/Guard: Sold Separately

About these Antique Knives: These knives were manufactured by the Fifth or the Sixth generation of Sabatier makers around 1950 to 1960. Grinding was done by hand in the traditional method.

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

K Sabatier - Old Butcher - 12" Slicer - Semi-Flex - Rosewood Handle

Windmühlenmesser - Classic - Stainless - 105mm Utility - Cherry Handle

$45.00

Brand: Windmühlenmesser
Made in: Solingen - Germany
Line: Classic
Profile: Utility
Edge Length: 103mm
Blade Height: 18.2mm
Edge Steel: Proprietary Stainless
Steel Type: Stainless
Grind: Convex
Construction: Mono-Steel
Cladding: N/A
Finish: Fine Glazed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Cherry
Ferrule/Bolster Material: N/A
Total Length: 210mm
Spine Length: 105mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 107mm
Weight: 30g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Windmühlenmesser - Classic - Stainless - 105mm Utility - Cherry Handle

Hitohira - Imojiya MZ - Blue #2 Stainless Clad - 145mm Santoku - Black Western Handle

$80.00

Brand: Hitohira ひとひら (一片)
Made in: Seki-Gifu, Japan
Line: Imojiya MZ
Profile: Santoku
Edge Length: 145mm
Blade Height: 39mm
Edge Steel: Blue (Aogami) #2
Steel Type: Carbon Steel
Construction: Awase/Clad
Cladding: Soft Stainless Clad
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material:
Total Length: 253mm
Spine Length: 150mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 105mm
Weight: 105g
Saya/Guard: Purchase Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Imojiya MZ - Blue #2 Stainless Clad - 145mm Santoku - Black Western Handle

Windmühlenmesser - Yatagan - Stainless - 160mm Slicer - Plumwood Handle

$95.00

Brand: Windmühlenmesser
Made in: Solingen - Germany
Line: Yatagan
Profile: Slicer
Edge Length: 158mm
Blade Height: 16mm
Edge Steel: Proprietary Stainless
Steel Type: Stainless
Grind: Flat
Construction: Mono-Steel
Cladding: N/A
Finish: Blue Glazed
Bevel: Double
Bevel Symmetry: 505/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Plumwood
Ferrule/Bolster Material: N/A
Total Length: 273mm
Spine Length: 157mm
Thickness of Spine at Handle: 1.4mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 110mm
Weight: 57g
Saya/Guard: Sold Seperately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Windmühlenmesser - Yatagan - Stainless - 160mm Slicer - Plumwood Handle

Windmühlenmesser - Buckel - Stainless - 115mm Table Utility Knife - POM Handle - Serrated

$45.00

Brand: Windmühlenmesser
Made in: Solingen - Germany
Line: Buckel
Profile: Table Utility
Edge Length: 115mm
Blade Height: 19.7mm
Edge Steel: Proprietary Stainless
Steel Type: Stainless
Grind: Convex
Construction: Mono-Steel
Cladding: N/A
Finish: Fine Glazed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: N/A
Total Length: 220mm
Spine Length: 115mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: 1mm
Handle Length: 105.5mm
Weight: 54g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Windmühlenmesser - Buckel - Stainless - 115mm Table Utility Knife - POM Handle - Serrated

Hitohira - Hiragana - 180mm Deba - Pakka Handle - No Bolster

$80.00

Brand: Hitohira ひとひら (一片)
Made In: Seki-Gifu, Japan
Line: Hiragana
Profile: Deba
Edge Length: 184mm
Blade Height: 54mm
Edge Steel: AUS-8
Steel Type: Stainless
Cladding: N/A
Bevel: Single
Bevel Symmetry: 100/0
Hand Orientation: Right Handed
Handle: Western Pakka
Total Length: 305mm
Spine Length: 190mm
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 4.4mm
Thickness ~1cm from Tip: 2.6mm
Handle Length: 116mm
Weight: 304g
Saya/Guard: Purchased Separately

Hitohira - Hiragana - 180mm Deba - Pakka Handle - No Bolster

K Sabatier - Auvergne - Stainless - 8" Slicer - Western Corol Handle

$95.00

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Slicer
Edge Length: 204mm
Blade Height: 30mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 328mm
Spine Length: 205mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 117mm
Weight: 165g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

K Sabatier - Auvergne - Stainless - 8" Slicer - Western Corol Handle

Kanehide - Bessaku Stainless - 240mm Sujihiki - Rosewood Handle

$95.00

Brand: Kanehide 兼秀
Made in: Seki, Gifu - Japan
Line: Bessaku Stainless
Profile: Sujihiki
Edge Length: 240mm
Blade Height: 37.7mm
Edge Steel: Unclassified Stainless
Steel Type: Stainless
Grind: Asymmetric Double Bevel
Construction: Mono-Steel
Cladding: N/A
Finish: Migaki/Standard
Bevel: Double
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Total Length: 350mm
Spine Length: 243mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 110mm
Weight: 137g

Saya/Guard: Sold Seperately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.