In stock

Brand: Hitohira ひとひら (一片) 
Line: Futana
Profile: Nakiri
Edge Steel: Ginsanko
Steel Type: Stainless
Cladding: Stainless Kurouchi Nashiji
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal
Total Length: 315mm
Edge Length: 162mm 
Spine Length:  180mm
Blade Height: 51mm
Spine Thickness: 1.7mm
Handle Length: 135mm
Weight: 157g 
Saya: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira  ひとひら (一片)
Line: Imojiya ST
Profile: Santoku
Edge Length: 170mm
Hardness: 59±1HRC
Steel Type: Stainless
Steel: VG-10
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Wa
Total Length: 296mm
Spine Length: 173mm
Handle Length: 123mm
Blade Height: 47mm
Thickness at Spine: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.4mm
Weight: 176g
Saya/Guard: Purchased Separately

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

CARE ADVISEMENTS

This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Imojiya - SG2
Smith: Seto 瀬戸
Producing Area: Seki, Gifu Prefecture
Profile: Gyuto
Edge Length: 210mm
Edge Steel: SG2
HRC: 62-64
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Western pakka
Total Length: 230mm
Spine Length: 210mm
Handle Length: 115mm
Blade Height: 45mm
Thickness: 1.7mm
Weight: 170g
Saya/Guard: No

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira  ひとひら (一片)
Line: Imojiya ST
Profile: Nakiri
Edge Length: 180mm
Hardness: 59 HRC
Steel Type: Stainless
Cladding: Stainless
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Wa
Total Length: 313mm
Spine Length: 190mm
Handle Length: 121mm
Blade Height: 45mm
Thickness: 2.5mm
Weight: 185g
Saya/Guard: No

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira  ひとひら (一片)
Line: Imojiya ST
Profile: Nakiri
Edge Length: 165mm
Hardness: 59±1HRC
Steel Type: Stainless
Steel: VG-10
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Wa
Total Length: 295mm
Spine Length: 172mm
Handle Length: 122mm
Blade Height: 46mm
Thickness at Spine: 1.6mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 1.4mm
Weight: 187g
Saya/Guard: Purchased Separately

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: TP
Profile: Gyuto
Edge Length: 211mm
Edge Steel: SG2
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Wine Pakka Western 
Total Length: 338mm 
Spine Length: 220mm 
Blade Height: 45mm 
Thickness at Spine: 1.5mm 
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.6
Handle Length: 119mm 
Weight: 154g
Saya/Guard: No

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira
Line: T10
Profile: Gyuto
Edge Length: 181mm
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western 
Total Length: 306mm 
Spine Length: 187mm 
Blade Height: 42mm 
Thickness at Spine: 1.7mm 
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.6
Handle Length: 120mm 
Weight: 134g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

CARE ADVISEMENTS

This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Futana
Profile: Gyuto
Edge Length: 246mm
Edge Steel: Ginsanko (Silver 3)
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry Wa
Total Length: 401mm 
Spine Length: 256mm 
Blade Height: 48mm 
Thickness at Spine: 1.9mm 
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.8
Handle Length: 145mm 
Weight: 166g
Saya: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

60HRC Hardness

Brand: Ryusen  株式会社 龍泉刃物
Line: Botenunryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric 
Handle: Black Pakka Western
Total Length: 335mm
Edge Length: 214mm
Spine Length: 215mm
Blade Height: 45mm
Thickness at Spine: 2.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 120mm
Weight: 194g

Brand: Hitohira ひとひら (一片) 
Line: Imojiya TH Damascus
Profile: Gyuto
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Soft Stainless Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50 
Handle: Red Pakka Wa
Hand Orientation: Ambidextrious 
Total Length: 364mm
Edge Length: 206mm
Spine Length: 223mm
Blade Height: 46mm
Handle Length: 140mm
Thickness of Spine at Handle: 2.1mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 0.6mm
Weight: 160g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Futana - Super Blue
Profile: Gyuto
Edge Length: 247mm 
Edge Steel: Blue (Aogami) Super
Steel Type: Carbon
Cladding: Stainless Kurouchi Tsuchime
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal 
Total Length: 401mm
Spine Length:  255mm
Blade Height: 49mm
Thickness: 1.8mm
Handle Length: 145mm
Weight: 171g 
Saya: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand:  Hitohira ひとひら (一片)
Made in: Miki, Hyogo - Japan
Line: Harima
Profile: Nakiri
Edge Length: 165mm
Blade Height: 47mm
Edge Steel: Aogami Super/Blue Super
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Stainless
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Oval Octagonal Walnut w/ Pakka Ferrule
Total Length: 128mm
Spine Length: 180mm
Thickness of Spine at Handle: 4.1mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 128mm
Weight: 162mm
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Imojiya TH Damascus
Profile: Santoku
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Handle: Red Pakka Wa
Hand Orientation: Ambidextrious 
Total Length: 330mm
Edge Length: 175mm
Spine Length: 193mm
Blade Height: 52mm
Handle Length: 140mm
Thickness of Spine at Handle: 1.9mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.1mm
Weight: 155g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.