Sakai Kikumori - Kikuzuki Uzu - Blue #1 Damascus - 270mm Kiritsuke Gyuto - Ho Wood Handle
Brand: Sakai Kikumori 堺菊守
Smith: Tanaka Uchihamono 田中打刃物
Made In: Sakai - Japan
Line: KIKUZUKI Uzu
Profile: Kiritsuke Gyuto
Edge Length: 252mm
Blade Height: 46mm
Edge Steel: Blue #1 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Ho Wood
Total Length: 410mm
Spine Length: 272mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 138mm
Weight: 200g
Saya/Guard: Sold Separately
Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.
Mumei - Stainless Steel - 180mm Deba - Ho Wood Handle
Forge De Laguiole - 12cm - 2 Piece Folding Knife - Spring System - Thuya Handle
Total Length Open: 219mm
Total Length Closed: 120mm
Blade Length: 90mm
Handle Length: 120mm
Spine Thickness: 2.4mm
Weight: 92g
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.
Hitohira - Kikuchiyo x Manzo - Blue #2 - 330mm Yanagiba - Ho Wood Handle
Brand: Hitohira ひとひら (一片)
Smith: Kikuchiyo 菊千代
Sharpener: Manzo 万造
Profile: Yanagiba
Edge Steel: Blue #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Single Bevel
Hand Orientation: Right Handed
Handle: Poplar Wa
Total Length: 490mm
Edge Length: 322mm
Spine Length: 337mm
Blade Height: 38mm
Thickness at Spine: 4.7mm
Thickness ½ way: 3.5mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 151mm
Weight: 264g
Saya/Guard: Yes
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.
Hitohira - Kikuchiyo x Mosuke - White #1 Enmon Damascus - 300mm Yanagiba - Lacquered Handle
Brand: Hitohira ひとひら (一片)
Black Smith: Kikuchiyo 菊千代
Sharpener: Mosuke モスケ
Profile: Yanagiba
Edge Steel: White #1 (Shirogami)
Steel Type: Carbon
Cladding: Soft Iron Damascus
Bevel: Single Bevel
Hand Orientation: Right Handed
Handle: Gold & Black Lacquered Handle
Total Length: 455mm
Edge Length: 290mm
Spine Length: 307mm
Blade Height: 35mm
Thickness at Spine: 3.8mm
Thickness ½ way: 3.2mm
Thickness ~1cm from Tip: 1.2
Handle Length: 147mm
Weight: 203g
Saya/Guard: Sold Separately
Disclaimer: Single Bevel Knives are sold "Factory Sharp". Sharpening requests are subject to wait times.
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.