Brand: Kimura Glass
Line: Mikumi
Glass Type: Lead-Free Crystal
Total Height: 175mm
Base Diameter: 71mm
Stem Thickness: 5mm
Cup Height: 55mm
Cup Widest Diameter: 79mm
Glass Thickness: 0.08mm
Weight: 68g
You may also like
Brand: Hitohira ひとひら (一片)
Made in: Sakai-Osaka/ Japan
Smith: Kikuchiyo 菊千代
Sharpener: Manzō 万造
Line: Kikuchiyo x Manzo
Profile: Deba
Edge Length: 186mm
Blade Height: 55mm
Edge Steel: Yasuki Blue (Aogami) #2
Steel Type: Carbon
Construction: Awase/Clad, Ni Mai
Cladding: Soft Iron
Finish: Migaki
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 201mm
Thickness of Spine at Handle: 8.4mm
Thickness ½ way: 6.2mm
Thickness ~1cm from Tip: 3.8mm
Handle Length: 139mm
Total Length: 333mm
Weight: 418g
Saya/Guard: Included
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: HG
Profile: Santoku
Edge Length: 185mm
Blade Height: 45mm
Edge Steel: Unclassified Stainless
Steel Type: Stainless Steel
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Tsuchime Damascus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 196mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 135mm
Total Length: 330mm
Weight: 136g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Brand: Hitohira ひとひら (一片)
Producing Area: Sakai-Osaka/ Japan
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi
Line: Togashi Honyaki
Profile: Yanagiba
Edge Length: 288mm
Blade Height: 35mm
Edge Steel: White #1
Steel Type: Carbon
Construction: Mizu Honyaki
Cladding: N/A
Finish: Sanbonsugi
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right Handed
Handle Shape: Octagonal
Handle Material: Kurokaki Persimmon
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 305mm
Thickness of Spine at Handle: 4.2mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 145mm
Total Length: 450mm
Weight: 239g
Saya/Guard: Included
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Brand: Hitohira ひとひら (一片)
Line: Echizen
Profile: Yanagiba
Edge Length: 203mm
Blade Height: 31mm
Edge Steel: Blue #2
Steel Type: Carbon
Construction: Awase/Clad, Ni Mai
Cladding: Soft Iron
Finish: Damascus
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right Handed
Handle Shape: D-Shaped
Handle Material: Rosewood
Ferrule/Bolster Material: Pakka
Spine Length: 213mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 130mm
Total Length: 342mm
Weight: 120g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Brand: Hitohira ひとひら
Made in: Tosa-Kochi/ Japan
Line: Tosa
Profile: Nakiri
Edge Length: 168mm
Blade Height: 60mm
Edge Steel: Blue (Aogami) #2
Steel Type: Carbon Steel
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Rengas Wood
Spine Length: 188mm
Thickness of Spine at Handle: 4.4mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 128mm
Total Length: 135mm
Weight: 154g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.