Japan

Goko Hamono - Kogetsu - SK Carbon - 150mm Petty - Western Handle

$150.00

Brand: Goko Hamono
Line: Kogetsu
Profile: Petty/Utility
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: None, Mono-steel
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 264mm
Edge Length: 152mm
Spine Length: 155mm
Blade Height: 32mm
Thickness: 1.4mm
Handle Length: 105mm
Weight: 108g
Saya: N/A

Goko Hamono - Kogetsu - SK Carbon - 150mm Petty - Western Handle

Goko Hamono - Kogetsu - White #1 - 165mm Gyuto - Western Handle

$295.00

Brand: Goko Hamono 五香刃物製作所
Made in: Chiba - Japan
Smith: Yoshito Yamakawa 八間川義人
Sharpener: Goko Hamono 五香刃物製作所
Line: Kogetsu 光月
Profile: Gyuto
Edge Length: 167mm
Blade Height: 42.8mm
Edge Steel: Shirogami #1/White #1
Steel Type: Carbon
Construction: Zenko/Mono-Steel
Cladding: N/A
Finish: Other
Bevel: Asymmetric Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Spine Length: 165mm
Thickness of Spine at Handle: 1.4mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 115.5mm
Total Length: 287mm
Weight: 150g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Goko Hamono - Kogetsu - White #1 - 165mm Gyuto - Western Handle

Hitohira - FJ SG2 - 180mm Bunka - Western Linen Micarta Handle - Mirror Polished

$575.00

Brand: Hitohira ひとひら (一片)
Made in: Seki-Gifu/ Japan
Line: FJ SG2 Mirror
Profile: Bunka
Edge Length: 179mm
Blade Height: 47mm
Edge Steel: SG2 Powder Metal
Steel Type: Stainless
Grind: Convex
Construction: Awase Clad
Cladding: Stainless
Finish: Mirror
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Linen Micarta
Ferrule/Bolster Material: Stainless Steel
Total Length: 296mm
Spine Length: 173mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 120mm
Weight: 173g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - FJ SG2 - 180mm Bunka - Western Linen Micarta Handle - Mirror Polished

Hitohira - Futana - Ginsan Nashiji - 240mm Gyuto - Western Pakka Handle

$220.00

Brand: Hitohira ひとひら (一片)
Made in: Japan
Line: Futana Ginsan Nashiji
Profile: Gyuto
Edge Length: 244mm
Blade Height: 49mm
Edge Steel: Ginsanko
Steel Type: Stainless
Grind: Convex
Construction: Awase/Clad, San-Mai
Cladding: Soft Stainless
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Black Pakka
Ferrule/Bolster Material: Stainless
Total Length: 375mm
Spine Length: 245mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 124mm
Weight: 225g
Saya/Guard: Purchased Separately

Hitohira - Futana - Ginsan Nashiji - 240mm Gyuto - Western Pakka Handle

Hitohira - HG - Damascus - 210mm Gyuto - Western Handle

$140.00

Brand: Hitohira ひとひら (一片)
Line: HG Damascus
Profile: Gyuto
Steel Type: Unclassified Stainless
Cladding: Stainless Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western
Total Length: 337mm
Edge Length: 215mm
Spine Length: 215mm
Handle Length: 120mm
Blade Height: 45mm
Thickness of Spine at Handle: 1.4mm
Thickness of Spine Half Way: 1.2mm
Thickness of Spine ~1cm from Tip: 0.5mm
Weight: 156g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - HG - Damascus - 210mm Gyuto - Western Handle

Hitohira - HG - Damascus - Santoku - Western Handle

$125.00

Brand: Hitohira ひとひら (一片)
Line: HG Damascus
Profile: Santoku
Steel Type: Unclassified Stainless
Cladding: Stainless Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western
Total Length: 295mm
Edge Length: 171mm
Spine Length: 174mm
Handle Length: 118mm
Blade Height: 51mm
Thickness of Spine at Handle: 1.6mm
Thickness of Spine Half Way: 1.5mm
Thickness of Spine ~1cm from Tip: 0.9mm
Weight: 157g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - HG - Damascus - Santoku - Western Handle

Hitohira - Hiragana - 120mm Deba - Pakka Handle - No Bolster

$60.00

Brand: Hitohira ひとひら (一片)
Made In: Seki-Gifu, Japan
Line: Hiragana
Profile: Deba
Edge Length: 111mm
Blade Height: 43mm
Edge Steel: AUS-8
Steel Type: Stainless
Cladding: N/A
Bevel: Single
Bevel Symmetry: 100/0
Hand Orientation: Right Handed
Handle: Western Pakka
Total Length: 225mm
Spine Length: 120mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 3.7mm
Thickness ~1cm from Tip: 3.1mm
Handle Length: 107mm
Weight: 169g
Saya/Guard: Purchased Separately

Hitohira - Hiragana - 120mm Deba - Pakka Handle - No Bolster

Hitohira - Hiragana - 150mm Deba - Pakka Handle - No Bolster

$70.00

Brand: Hitohira ひとひら (一片)
Made In: Seki-Gifu, Japan
Line: Hiragana
Profile: Deba
Edge Length: 150mm
Blade Height: 55mm
Edge Steel: AUS-8
Steel Type: Stainless
Cladding: N/A
Bevel: Single
Bevel Symmetry: 100/0
Hand Orientation: Right Handed
Handle: Western Pakka
Total Length: 276mm
Spine Length: 160mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 4.0mm
Thickness ~1cm from Tip: 3.6mm
Handle Length: 116mm
Weight: 260g
Saya/Guard: Purchased Separately

Hitohira - Hiragana - 150mm Deba - Pakka Handle - No Bolster

Hitohira - Hiragana - 180mm Deba - Pakka Handle - No Bolster

$80.00

Brand: Hitohira ひとひら (一片)
Made In: Seki-Gifu, Japan
Line: Hiragana
Profile: Deba
Edge Length: 184mm
Blade Height: 54mm
Edge Steel: AUS-8
Steel Type: Stainless
Cladding: N/A
Bevel: Single
Bevel Symmetry: 100/0
Hand Orientation: Right Handed
Handle: Western Pakka
Total Length: 305mm
Spine Length: 190mm
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 4.4mm
Thickness ~1cm from Tip: 2.6mm
Handle Length: 116mm
Weight: 304g
Saya/Guard: Purchased Separately

Hitohira - Hiragana - 180mm Deba - Pakka Handle - No Bolster

Hitohira - Imojiya - MZ VG-1 - 165mm Santoku - Western Handle

$95.00

Brand: Hitohira ひとひら (一片)
Made In: Japan
Line: Imojiya MZ VG1
Profile: Santoku
Edge Length: 165mm
Blade Height: 46mm
Edge Steel: VG1
Steel Type: Stainless
Cladding: Stainless Cladding
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 288mm
Spine Length: 170mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 116mm
Weight: 150g
Saya/Guard: Purchase Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya - MZ VG-1 - 165mm Santoku - Western Handle

Hitohira - Imojiya - SG2 - 210mm Gyuto -Western Handle

$180.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya - SG2
Smith: Seto 瀬戸
Producing Area: Seki, Gifu Prefecture
Profile: Gyuto
Edge Length: 210mm
Edge Steel: SG2
HRC: 62-64
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Western pakka
Total Length: 230mm
Spine Length: 210mm
Handle Length: 115mm
Blade Height: 45mm
Thickness: 1.7mm
Weight: 170g
Saya/Guard: No

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya - SG2 - 210mm Gyuto -Western Handle

Hitohira - Imojiya - SG2 - 240mm Gyuto - Western Handle

$200.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya - SG2
Smith: Seto 瀬戸
Producing Area: Seki, Gifu Prefecture
Profile: Gyuto
Edge Steel: SG2
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Western pakka
Total Length: 357mm
Edge Length: 236mm
Spine Length: 236mm
Handle Length: 117mm
Blade Height: 49mm
Thickness: 1.6mm
Weight: 202g
Saya/Guard: N/A

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya - SG2 - 240mm Gyuto - Western Handle

Hitohira - Imojiya KT - VG10 - 210mm Sujihiki - Micarta Handle

$175.00

Brand: Hitohira ひとひら (一片)
Made in: Seki, Gifu - Japan
Line: Imojiya KT
Profile: Sujihiki
Edge Length: 210mm
Blade Height: 34.5mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase/Clad
Cladding: Soft Stainless
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Linen Micarta Western
Total Length: 340mm
Spine Length: 215mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 125mm
Weight: 205g
Saya/Guard: Purchased Separately

Hitohira - Imojiya KT - VG10 - 210mm Sujihiki - Micarta Handle

Hitohira - Imojiya KT - VG10 - Damascus - 120mm Petty - Western Micarta Handle

$125.00

Brand: Hitohira ひとひら (一片)
Producing Area: Seki-Gifu/ Japan
Profile: Petty
Size: 120mm
Steel Type: Stainless Steel
Hand Orientation: Ambidextrous
Steel: VG-10, Stainless Damascus Clad
Handle: Micarta Western
Total Length: 228mm
Edge Length: 120mm
Spine Length: 125mm
Blade Height: 25mm
Thickness of Spine at Handle: 1.8mm
Thickness of Spine Half Way: 1.7mm
Thickness of Spine ~1cm from Tip: 1.0mm
Handle Length: 104mm
Weight: 82g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya KT - VG10 - Damascus - 120mm Petty - Western Micarta Handle

Hitohira - Imojiya KT - VG10 - Damascus - 150mm Petty - Western Micarta Handle

$135.00

Brand: Hitohira ひとひら (一片)
Producing Area: Seki-Gifu/ Japan
Profile: Petty
Steel Type: Stainless Steel
Hand Orientation: Ambidextrous
Steel: VG-10, Stainless Damascus Clad
Handle: Micarta Western
Total Length: 257mm
Edge Length: 151mm
Spine Length: 155mm
Blade Height: 32mm
Thickness of Spine at Handle: 1.8mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.1mm
Handle Length: 100mm
Weight: 96g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya KT - VG10 - Damascus - 150mm Petty - Western Micarta Handle

Hitohira - Imojiya KT - VG10 - Damascus - 90mm Paring - Western Micarta Handle

$115.00

Brand: Hitohira ひとひら (一片)
Producing Area: Seki-Gifu/ Japan
Profile: Paring
Steel Type: Stainless Steel
Hand Orientation: Ambidextrous
Steel: VG-10, Stainless Damascus Clad
Handle: Micarta Western
Total Length: 194mm
Edge Length: 88mm
Spine Lenght: 90mm
Blade Height: 21mm
Thickness of Spine at Handle: 1.7mm
Thickness of Spine Half Way: 1.4mm
Thickness of Spine ~1cm from Tip: 0.8mm
Handle Length: 104mm
Weight: 72g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya KT - VG10 - Damascus - 90mm Paring - Western Micarta Handle

Hitohira - Imojiya KT - VG10 Damascus - 200mm Gyuto - Western Micarta Handle

$180.00

Brand: Hitohira ひとひら (一片)
Producing Area: Seki-Gifu/ Japan
Profile: Gyuto
Steel Type: Stainless Steel
Hand Orientation: Ambidextrous
Steel: VG-10, Stainless Damascus Clad
Handle: Micarta Western
Total Length: 330mm
Edge Length: 198mm
Spine Length: 203mm
Blade Height: 46mm
Thickness of Spine at Handle:
Thickness of Spine Half Way:
Thickness of Spine ~1cm from Tip:
Handle Length: 130mm
Weight: 224mm
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya KT - VG10 Damascus - 200mm Gyuto - Western Micarta Handle

Hitohira - Imojiya KT - VG10 Damascus - 230mm Gyuto - Western Micarta Handle

$200.00

Brand: Hitohira ひとひら (一片)
Made in: Seki, Gifu - Japan
Line: Imojiya KT
Profile: Gyuto
Edge Length: 233mm
Blade Height: 49.5mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase/Clad
Cladding: Soft Stainless
Finish: Damascus
Bevel: Double
Bevel Symmetry: Symmetric
Hand Orientation: Ambidextrous
Handle: Micarta Western
Total Length: 363mm
Spine Length: 236mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 125mm
Weight: 240g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya KT - VG10 Damascus - 230mm Gyuto - Western Micarta Handle

Hitohira - Imojiya Kuma - Blue #2 Nashiji Tsuchime - 135mm Petty - Western Handle

$85.00

Brand: Hitohira ひとひら (一片)
Producing Area: Seki-Gifu/ Japan
Profile: Petty
Size: 135mm
Steel Type: Carbon Steel
Steel: Yasuki Blue (Aogami) #2, Soft Stainless Clad
Handle: Pakka Western
Total Length: 240mm
Edge Length: 132mm
Handle to Tip Length: 134mm
Blade Height: 25mm
Thickness: 1.6mm
Handle Length: 102mm
Weight: 77g
Hand Orientation: Ambidextrous

Saya/Guard: N/A

Hitohira - Imojiya Kuma - Blue #2 Nashiji Tsuchime - 135mm Petty - Western Handle

Hitohira - Imojiya Kuma - Blue #2 Nashiji Tsuchime - 165mm Nakiri - Western Handle

$120.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya Kuma
Smith: Seto 瀬戸
Producing Area: Seki-Gifu/ Japan
Profile: Nakiri
Edge Length: 165mm
Edge Steel: Blue #2 (Aogami)
Steel Type: Stainless Clad Carbon Core
Cladding: Soft Iron Tsuchime
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western
Total Length: 296mm
Spine Length: 173mm
Blade Height: 49mm
Thickness: 1.7mm
Handle Length: 120mm
Weight: 170g
Saya/Guard: No

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care Advisements: This blade has a carbon core steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Imojiya Kuma - Blue #2 Nashiji Tsuchime - 165mm Nakiri - Western Handle

Hitohira - Imojiya Kuma - Blue #2 Nashiji Tsuchime - 180mm Santoku - Western Handle

$120.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya - Blue (Aogami) #2
Producing Area: Seki, Gifu Prefecture
Profile: Santoku
Edge Length: 180mm
Edge Steel: Blue (Aogami) #2
Steel Type: Stainless Clad Carbon Core
Cladding: Stainless Nashiji Tsuchime
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Western pakka
Total Length: 328mm
Spine Length: 185mm
Handle Length: 120mm
Blade Height: 45mm
Thickness: 1.9mm
Weight: 162mm

CARE ADVISEMENTS

This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.