Japan

Brand: Hitohira  ひとひら (一片)
Line: Imojiya TH
Producing Area: Seki-Gifu/ Japan
Profile: Honesuki Maru
Steel Type: Carbon
Bevel: Double
Bevel Symmetry: 90:10
Hand Orientation: Right-Handed, Asymmetric 
Handle: Pakka Western
Total Length: 256mm
Edge Length: 137mm
Spine Length: 140mm
Handle Length: 113mm
Blade Height: 37mm
Thickness at Handle: 2.0mm
Thickness at Middle: 2.0mm
Thickness at Tip: 1.5mm
Weight: 143g
Saya/Guard: Purchased Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira  ひとひら (一片)
Line: Imojiya TH
Producing Area: Seki-Gifu/ Japan
Profile: Honesuki Maru
Steel Type: Carbon
Bevel: Double
Bevel Symmetry: 90:10
Hand Orientation: Right-Handed, Asymmetric 
Handle: Pakka Western
Total Length: 255mm
Edge Length: 148mm
Spine Length: 154mm
Handle Length: 103mm
Blade Height: 30mm
Thickness at Handle: 2.1mm
Thickness at Middle: 1.8mm
Thickness at Tip: 1.5mm
Weight: 157g
Saya/Guard: Purchased Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in:  Tosa-Kochi/ Japan
Line: Kurouchi
Profile: Japanese Paring Knife
Edge Length: 85mm
Blade Height: 40mm
Edge Steel: White #2 (Shirogami)
Steel Type: Carbon
Grind: Convex
Construction: Awase/Clad
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Wa
Handle Material: Magnolia
Ferrule/Bolster Material: Buffalo Horn
Total Length: 195mm
Spine Length: 95mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 101mm
Weight: 67g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Line: Nihonko
Profile: Santoku
Edge Length: 180mm
Blade Height: 45.8mm
Edge Steel: SK
Steel Type: Carbon
Construction: Mono-Steel/Zenko
Cladding: N/A
Finish: Migaki/Standard
Bevel: Double
Bevel Symmetry: 30:70
Hand Orientation: Right-Hand Asymmetric
Handle: Western
Handle Material: Pakka
Ferrule Material: Carbon Steel
Total Length: 300mm
Spine Length: 180mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 120mm
Weight: 155g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.