Japan

Brand: Hitohira ひとひら (一片)
Line: Echizen 
Profile: Yanagiba
Edge Length: 203mm
Blade Height: 31mm
Edge Steel: Blue #2
Steel Type: Carbon
Construction: Awase/Clad, Ni Mai
Cladding: Soft Iron
Finish: Damascus
Bevel: Single
Bevel Symmetry:  0/100 
Hand Orientation: Right Handed
Handle Shape: D-Shaped
Handle Material: Rosewood
Ferrule/Bolster Material: Pakka
Spine Length: 213mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 130mm
Total Length: 342mm
Weight: 120g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Gyuto
Steel Type: Unclassified Stainless 
Cladding: Stainless Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Pakka Western
Total Length: 337mm 
Edge Length: 215mm 
Spine Length: 215mm 
Handle Length: 120mm 
Blade Height: 45mm 
Thickness of Spine at Handle: 1.4mm 
Thickness of Spine Half Way: 1.2mm 
Thickness of Spine ~1cm from Tip: 0.5mm 
Weight: 156g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Imojiya TH Damascus
Profile: Gyuto
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Soft Stainless Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50 
Handle: Red Pakka Wa
Hand Orientation: Ambidextrious 
Total Length: 364mm
Edge Length: 206mm
Spine Length: 223mm
Blade Height: 46mm
Handle Length: 140mm
Thickness of Spine at Handle: 2.1mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 0.6mm
Weight: 160g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

60HRC Hardness

Brand: Ryusen  株式会社 龍泉刃物
Line: Botenunryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric 
Handle: Black Pakka Western
Total Length: 335mm
Edge Length: 214mm
Spine Length: 215mm
Blade Height: 45mm
Thickness at Spine: 2.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 120mm
Weight: 194g

Brand: Ryusen  株式会社 龍泉刃物
Line: Botenunryu KAI
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Quince
Total Length: 357mm
Edge Length: 210mm
Spine Length: 230mm
Blade Height: 46.7mm
Thickness at Spine: 3.2mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: .4mm 
Handle Length: 127mm
Weight: 147g

Brand: Ryusen Hamono  株式会社 龍泉刃物
Made in: Echizen, Fukui
Line: SOURYURIN
Profile: Gyuto
Edge Length: 211mm
Blade Height: 46mm
Edge Steel: VG-10W
Steel Type: Stainless
Grind: Double Bevel
Construction: Awase/Clad, San-Mai
Cladding: Soft Stainless
Finish: Tsuchime, Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Polyurethane Resin
Ferrule/Bolster Material: Stainless Steel
Total Length: 357mm
Spine Length: 228mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1mm
Handle Length: 127mm
Weight: 204g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

60HRC Hardness

Brand: Ryusen 株式会社 龍泉刃物
Line: Tangan Ryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle: Black Micarta 
Total Length: 350mm
Edge Length: 208mm
Spine Length: 220mm
Blade Height: 43mm
Thickness at Spine: 2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 125mm
Weight: 200g

Brand: Ryusen 株式会社 龍泉刃物
Line: Tangan Ryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Maple Hybrid Western
Total Length: 347mm
Edge Length: 204mm
Spine Length: 220mm
Blade Height: 43mm
Thickness at Spine: 2.4mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 125mm
Weight: 178g

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守 
Smith: Tanaka Uchihamono 田中打刃物
Made In: Sakai - Japan
Line: KIKUZUKI Uzu
Profile: Gyuto
Edge Length: 195mm
Blade Height: 46mm
Edge Steel: Blue #1 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Ho Wood
Total Length: 343mm
Spine Length: 214mm
Thickness of Spine at Handle: 3.2mm 
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 129mm
Weight: 146g
Saya/Guard: Sold Separately

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Brand: Sakai Kikumori 堺菊守 
Smith: Tanaka Uchihamono 田中打刃物
Made In: Sakai - Japan
Line: KIKUZUKI Uzu
Profile: Kiritsuke Gyuto
Edge Length: 295mm
Blade Height: 42mm
Edge Steel: Blue #1 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Magnolia (Ho) Wood
Total Length: 343mm
Spine Length: 212mm
Thickness of Spine at Handle: 3.2mm 
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1mm
Handle Length: 128mm
Weight: 140g
Saya/Guard: Sold Separately

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Brand: Sakai Kikumori 堺菊守
Smith: Satoshi Nakagawa
Made in: Sakai, Osaka - Japan
Line: Blue #1 Damascus
Profile: Gyuto
Edge Length: 201mm
Blade Height: 46.6mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Iron
Finish: Damascus/Sekiso
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Oval Octagonal Wa
Handle Material: Magnolia/Ho Wood, Buffalo Horn Ferrule
Total Length: 341mm
Spine Length: 218mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 126mm
Weight: 151g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori
Line: Seiun
Made in: Sakai - Japan
Smith: Satoshi Nakagawa 
Profile: Gyuto
Edge Length: 201mm
Blade Height: 48mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft stainless Damascus
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 215mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1mm
Handle Length: 128mm
Total Length: 342mm
Weight: 182g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.