in stock

Filter
  • Under $100
  • Carbon
  • 100mm-150mm (4"-6")
  • Under $100
  • Carbon
  • 100mm-150mm (4"-6")
13 products
Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle
$95.00
Mizuno - Zenko Koono Axe - 700g - Straight Oak Handle
$90.00
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
$75.00
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
$75.00
Mizuno - Craft Axe - 450g - Curved Oak Handle
$105.00
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
$75.00
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
$80.00
Higonokami - Fixed Blade - 155mm Kogatana
$75.00
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
$95.00
K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle
$75.00
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
$60.00
K Sabatier - Authentique - Carbon - 6” Chef - Western Handle
$70.00
K Sabatier - Authentique Carbon - 5" Boning Knife - Western Handle
$80.00

Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle

AAA-456-05-AA080

$95.00 Save $95.00

Brand: Hitohira ひとひら (一片)
Made in:  Tosa-Kochi/ Japan
Line: Kurouchi
Profile: Japanese Paring Knife
Edge Length: 85mm
Blade Height: 40mm
Edge Steel: White #2 (Shirogami)
Steel Type: Carbon
Grind: Convex
Construction: Awase/Clad
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Wa
Handle Material: Magnolia
Ferrule/Bolster Material: Buffalo Horn
Total Length: 195mm
Spine Length: 95mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 101mm
Weight: 67g
Saya/Guard: Purchased Separately

 

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle
Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle
Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle
Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle
Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle
Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle
Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle
Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle
Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle
Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle
Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle
Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle
Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle
Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle
Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle
Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle
Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle
Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle

Mizuno - Zenko Koono Axe - 700g - Straight Oak Handle

INBCA-040-700G

$90.00 Save $90.00

Brand: Mizuno 水野製作所株式会社
Smith: Mizuno Seisakusho 水野製作所
Producing Area: Sanjo-Niigata/ Japan
Steel: S45C
Steel Type: Mono (Zenko) Carbon 
HRC: 55-56
Handle: Oak
Total Length: 460mm
Blade Length: 75mm
Thickness at Poll: 23mm
Weight: 970mm

Includes a Vinyl Sheath with snap & string.

Mizuno - Zenko Koono Axe - 700g - Straight Oak Handle
Mizuno - Zenko Koono Axe - 700g - Straight Oak Handle
Mizuno - Zenko Koono Axe - 700g - Straight Oak Handle
Mizuno - Zenko Koono Axe - 700g - Straight Oak Handle
Mizuno - Zenko Koono Axe - 700g - Straight Oak Handle
Mizuno - Zenko Koono Axe - 700g - Straight Oak Handle
Mizuno - Zenko Koono Axe - 700g - Straight Oak Handle
Mizuno - Zenko Koono Axe - 700g - Straight Oak Handle
Mizuno - Zenko Koono Axe - 700g - Straight Oak Handle
Mizuno - Zenko Koono Axe - 700g - Straight Oak Handle
Mizuno - Zenko Koono Axe - 700g - Straight Oak Handle
Mizuno - Zenko Koono Axe - 700g - Straight Oak Handle
Mizuno - Zenko Koono Axe - 700g - Straight Oak Handle
Mizuno - Zenko Koono Axe - 700g - Straight Oak Handle

Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle

AAA-265S-2-01-HB

$75.00 Save $75.00

Brand: Hitohira  ひとひら (一片)
Line: Imojiya TH
Producing Area: Seki-Gifu/ Japan
Profile: Honesuki Maru
Steel Type: Carbon
Bevel: Double
Bevel Symmetry: 90:10
Hand Orientation: Right-Handed, Asymmetric 
Handle: Pakka Western
Total Length: 255mm
Edge Length: 148mm
Spine Length: 154mm
Handle Length: 103mm
Blade Height: 30mm
Thickness at Handle: 2.1mm
Thickness at Middle: 1.8mm
Thickness at Tip: 1.5mm
Weight: 157g
Saya/Guard: Purchased Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle

Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle

AAA-265S-2-01-HA

$75.00 Save $75.00

Brand: Hitohira  ひとひら (一片)
Line: Imojiya TH
Producing Area: Seki-Gifu/ Japan
Profile: Honesuki Maru
Steel Type: Carbon
Bevel: Double
Bevel Symmetry: 90:10
Hand Orientation: Right-Handed, Asymmetric 
Handle: Pakka Western
Total Length: 256mm
Edge Length: 137mm
Spine Length: 140mm
Handle Length: 113mm
Blade Height: 37mm
Thickness at Handle: 2.0mm
Thickness at Middle: 2.0mm
Thickness at Tip: 1.5mm
Weight: 143g
Saya/Guard: Purchased Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle
Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle

Mizuno - Craft Axe - 450g - Curved Oak Handle

INBCA-080-450G

$105.00 Save $105.00

Brand: Mizuno 水野製作所株式会社
Smith: Mizuno Seisakusho 水野製作所
Producing Area: Sanjo-Niigata/ Japan
Steel: S45C
Steel Type: Mono (Zenko) Carbon 
HRC: 55-56
Handle: Oak
Total Length: 244mm
Blade Length: 78mm
Thickness at Poll: 24mm
Weight: 631g

Includes a Leather Sheath with snap & Strap.

Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle
Mizuno - Craft Axe - 450g - Curved Oak Handle

Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle

INBCA-030-450G

$75.00 Save $75.00

Brand: Mizuno 水野製作所株式会社
Smith: Mizuno Seisakusho 水野製作所
Producing Area: Sanjo-Niigata/ Japan
Steel: S45C
Steel Type: Mono (Zenko) Carbon 
HRC: 55-56
Handle: Oak
Total Length: 338mm
Blade Length: 101mm
Thickness at Poll: 24mm
Weight: 768g

Includes a Vinyl Sheath with snap & s string.

Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle
Mizuno - Zenko Bakin Axe - 450g - Straight Oak Handle

K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle

EL-9100

$80.00 Save $80.00

Brand: K Sabatier 
Line: Vintage Nogent
Profile: Paring
Edge Length: 85mm
Steel Type: Carbon
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Stabilized Blackwood
Total Length: 193mm
Spine Length: 85mm
Blade Height: 20mm
Thickness at Spine: 1.5mm
Thickness ½ way: 0.8mm
Thickness ~1 cm from Tip: 0.3mm
Handle Length: 88mm
Weight: 30g

About NOGENT Antique Knives: These knives were manufactured by the Fifth or the Sixth generation of French knife makers around 1950 to 1960. Grinding was done by hand in the traditional method.  Carbon Steel Old brand on the blade (Sabatier K Garanti - Acier Fondu)

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle
K Sabatier - Vintage Nogent - 3" Paring - Blackwood Handle

Higonokami - Fixed Blade - 155mm Kogatana

iabba-010-155

$75.00 Save $75.00

These photos are an example, kogatana come in a variety of colors with a variety of covers.

Brand: Higonokami 肥後守
Smith: Mitsuo Nagao 永尾 光雄
Producing Area: Miki-Hyogo/ Japan
Size: 156mm
Steel Type: Carbon
Steel: White (Shirogami) #2, Soft Iron Clad
Hand Orientation: Ambidextrous
Comes with Sheath
Total Length: 156mm
Edge Length: 70mm
Handle to Tip Length: 80mm
Blade Height: 20mm
Thickness: 2.6mm
Handle Length: 75mm
Weight: 58g

Higonokami - Fixed Blade - 155mm Kogatana
Higonokami - Fixed Blade - 155mm Kogatana
Higonokami - Fixed Blade - 155mm Kogatana
Higonokami - Fixed Blade - 155mm Kogatana
Higonokami - Fixed Blade - 155mm Kogatana
Higonokami - Fixed Blade - 155mm Kogatana
Higonokami - Fixed Blade - 155mm Kogatana
Higonokami - Fixed Blade - 155mm Kogatana
Higonokami - Fixed Blade - 155mm Kogatana
Higonokami - Fixed Blade - 155mm Kogatana
Higonokami - Fixed Blade - 155mm Kogatana
Higonokami - Fixed Blade - 155mm Kogatana
Higonokami - Fixed Blade - 155mm Kogatana
Higonokami - Fixed Blade - 155mm Kogatana
Higonokami - Fixed Blade - 155mm Kogatana
Higonokami - Fixed Blade - 155mm Kogatana

Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle

daa-180-ba135

$95.00 Save $95.00
Brand: Hitohira ひとひら (一片)
Producing Area: Seki, Gifu - Japan
Profile: Petty
Size: 135mm
Steel Type: Carbon
Steel: Aogami #2 (Blue #2), Soft Stainless Clad
Handle: Pakka Western
Total Length: 240mm
Edge Length: 132mm
Handle to Tip Length: 134mm
Blade Height: 25mm
Thickness: 1.6mm
Handle Length: 102mm
Weight: 77g
Hand Orientation: Ambidextrous
Saya/Guard: Sold Separately
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle
Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle

K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle

C-1109-15

$75.00 Save $75.00

Brand: K Sabatier
Made in: Thiers - France
Line: Authentique - Carbon
Profile: Fillet
Edge Length: 149mm
Blade Height: 27mm
Edge Steel: XC75
Steel Type: Carbon Steel
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: Carbon Steel
Total Length: 260mm
Spine Length: 148mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 0.7mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 106mm
Weight: 95g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle
K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle
K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle
K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle
K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle
K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle
K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle
K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle
K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle
K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle
K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle
K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle
K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle
K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle
K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle
K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle
K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle
K Sabatier - Authentique - Carbon - 6" Fillet - Western Handle

K Sabatier - Authentique - Carbon - 4" Paring - Western Handle

C-1110-10

$60.00 Save $60.00

Brand: K Sabatier
Made in: Thiers - France
Line: Authentique - Carbon
Profile: Paring
Edge Length: 97mm
Blade Height: 23mm
Edge Steel: XC75
Steel Type: Carbon Steel
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: Carbon Steel
Total Length: 198mm
Spine Length: 95mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 97mm
Weight: 69g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle
K Sabatier - Authentique - Carbon - 4" Paring - Western Handle

K Sabatier - Authentique - Carbon - 6” Chef - Western Handle

$70.00 Save $70.00

Brand: K Sabatier
Made in: Thiers - France
Line: Authentique - Carbon
Profile: Chef
Edge Length: 149mm
Blade Height: 33mm
Edge Steel: XC75
Steel Type: Carbon Steel
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: Carbon Steel
Total Length: 259mm
Spine Length: 147mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 107mm
Weight: 121g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

K Sabatier - Authentique - Carbon - 6” Chef - Western Handle
K Sabatier - Authentique - Carbon - 6” Chef - Western Handle
K Sabatier - Authentique - Carbon - 6” Chef - Western Handle
K Sabatier - Authentique - Carbon - 6” Chef - Western Handle
K Sabatier - Authentique - Carbon - 6” Chef - Western Handle
K Sabatier - Authentique - Carbon - 6” Chef - Western Handle
K Sabatier - Authentique - Carbon - 6” Chef - Western Handle
K Sabatier - Authentique - Carbon - 6” Chef - Western Handle
K Sabatier - Authentique - Carbon - 6” Chef - Western Handle
K Sabatier - Authentique - Carbon - 6” Chef - Western Handle
K Sabatier - Authentique - Carbon - 6” Chef - Western Handle
K Sabatier - Authentique - Carbon - 6” Chef - Western Handle
K Sabatier - Authentique - Carbon - 6” Chef - Western Handle
K Sabatier - Authentique - Carbon - 6” Chef - Western Handle
K Sabatier - Authentique - Carbon - 6” Chef - Western Handle
K Sabatier - Authentique - Carbon - 6” Chef - Western Handle
K Sabatier - Authentique - Carbon - 6” Chef - Western Handle
K Sabatier - Authentique - Carbon - 6” Chef - Western Handle

K Sabatier - Authentique Carbon - 5" Boning Knife - Western Handle

C-1801-13

$80.00 Save $80.00

Brand: K Sabatier
Made in:Thiers - France
Line: Authentique - Carbon
Profile: Boning
Edge Length: 130mm
Blade Height: 29mm
Edge Steel: XC75
Steel Type: Carbon Steel
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: 
Total Length: 240mm
Spine Length: 127mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: 0.1mm
Handle Length: 108mm
Weight: 105g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

K Sabatier - Authentique Carbon - 5" Boning Knife - Western Handle
K Sabatier - Authentique Carbon - 5" Boning Knife - Western Handle
K Sabatier - Authentique Carbon - 5" Boning Knife - Western Handle
K Sabatier - Authentique Carbon - 5" Boning Knife - Western Handle
K Sabatier - Authentique Carbon - 5" Boning Knife - Western Handle
K Sabatier - Authentique Carbon - 5" Boning Knife - Western Handle
K Sabatier - Authentique Carbon - 5" Boning Knife - Western Handle
K Sabatier - Authentique Carbon - 5" Boning Knife - Western Handle
K Sabatier - Authentique Carbon - 5" Boning Knife - Western Handle
K Sabatier - Authentique Carbon - 5" Boning Knife - Western Handle
K Sabatier - Authentique Carbon - 5" Boning Knife - Western Handle
K Sabatier - Authentique Carbon - 5" Boning Knife - Western Handle