Under $100

Hitohira - Oyster Knife - Seki - Stainless - Small

$12.00

Total Length: 150mm
Blade Length: 64mm
Handle Length: 85mm
Blade Height: 16mm
Weight: 54g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Oyster Knife - Seki - Stainless - Small

Hitohira - Fish Scaler - Brass - Large

$14.00

Total Length: 200mm

Head Length: 60mm

Head Width: 35mm

Weight: 107g

Hitohira - Cutting Board - Kiri Wood - Small

$30.00

Dimensions: 235mm x 420mm x 20mm, ~467g

Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Hitohira - Cutting Board - Kiri Wood - Small

Hitohira - WB- Saya Pin

$1.00

A wooden pin used to fasten saya. It is slightly tapered. A drill bit or file of appropriate width must be used to fasten the hole, ideally thinner than the actual width of the pin to assure a tight fit.

Brand: Hitohira
Line: WB
Made In: Japan
Material: Wood
Shaft Length: 14mm
Shaft Width At Head: 4mm
Shaft Width at End: 3.8mm
Head Length: 5mm
Head Width: 7.2mm
Total Length: 19.5mm
Weight: 1g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Cutting Board - Aomori Hiba - Small

$75.00

This is the best cutting board in the world, seriously! Not harvested until a ripe 250-300 years old, Hiba trees grow in the Aomori Prefecture in Northern Honshu and are a part of the cypress family. Aomori Hiba wood makes for and ideal cutting surface because it has the perfect firmness level, so it won't damage blade edges. Due to a compound called Hinokitiol, Aomori Hiba wood is also naturally full of antimicrobial and germicidal properties and is super duper rot and mold resistant. Because of these resilient Aomori Hiba wood is often reserved for building shrines and temples in Japan. Plus it smells amazing!

Length: 377mm
Width: 205mm
Height: 28mm
Weight: 1123g

Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Cutting Board - Aomori Hiba - Small

Hitohira - Ho Wood Saya - 210mm Gyuto (3mm)

$28.00

Measurements are for the inside of the Saya, these measurements should be larger than your knives measurements.

Total Internal Length: 229mm

Height at Opening: 53mm

Width of Opening at Spine: 3.6mm

Width of Opening at Edge: 2.4mm

*These Measurements were taken from one sample, there might be slight variations in each one*

Hitohira - Ho Wood Saya - 210mm Gyuto (3mm)

Hitohira - Fish Scaler - Brass - Small

$10.00

Total Length: 175mm

Head Length: 45mm

Head Width: 25mm

Weight: 74g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Oyster Knife - Seki - Stainless - Large

$15.00

Brand: Hitohira ひとひら (一片)
Profile: Oyster
Edge Length: 97mm
Hand Orientation: Ambidextrious
Handle: Ho Wood
Total Length: 212mm
Handle Length: 115mm
Blade Height:  16mm
Thickness of Spine at Handle: 2.8mm
Thickness of Spine Half Way:  2.6mm
Thickness of Spine ~1cm from Tip: 2.4mm
Weight: 83g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Oyster Knife - Seki - Stainless - Large

Hitohira - Imojiya ST - Tsuchime Damascus - 75mm Paring - Western Handle

$70.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya - Tsuchime Damascus
Smith: Seto 瀬戸
Producing Area: Seki, Gifu Prefecture
Profile: Paring
Edge Length: 80mm
Edge Steel: VG-10
Hardness: 60-61 HRC
Steel Type: Stainless
Cladding: Stainless Tsuchime Damscus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Octagonal pakka, pakka ferrule
Total Length: 190mm
Spine Length: 84mm
Handle Length: 106mm
Blade Height: 22mm
Thickness: 1.7mm
Weight: 68g
Saya/Guard: No

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya ST - Tsuchime Damascus - 75mm Paring - Western Handle

Hitohira - Imojiya Kuma - Blue #2 Nashiji Tsuchime - 135mm Petty - Western Handle

$85.00

Brand: Hitohira ひとひら (一片)
Producing Area: Seki-Gifu/ Japan
Profile: Petty
Size: 135mm
Steel Type: Carbon Steel
Steel: Yasuki Blue (Aogami) #2, Soft Stainless Clad
Handle: Pakka Western
Total Length: 240mm
Edge Length: 132mm
Handle to Tip Length: 134mm
Blade Height: 25mm
Thickness: 1.6mm
Handle Length: 102mm
Weight: 77g
Hand Orientation: Ambidextrous

Saya/Guard: N/A

Hitohira - Imojiya Kuma - Blue #2 Nashiji Tsuchime - 135mm Petty - Western Handle

Hitohira - Ho Wood Saya - 240mm Gyuto (3mm)

$30.00

Measurements are for the inside of the Saya, these measurements should be larger than your knives measurements.

Total Internal Length: 250mm

Height at Opening: 55mm

Width of Opening at Spine: 2.9mm

Width of Opening at Edge: 1.9mm

*These Measurements were taken from one sample, there might be slight variations in each one*

Hitohira - Ho Wood Saya - 240mm Gyuto (3mm)

Hitohira - Imojiya ST - Tsuchime Damascus - 135mm Petty - Western Handle

$90.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya VG-10
Smith: Seto 瀬戸
Producing Area: Seki-Gifu/ Japan
Profile: Utility
Edge Length: 137mm
Edge Steel: VG-10
Steel Type: Stainless
Hardness: 60-61HRC
Cladding: Stainless Tsuchime Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western
Total Length: 247mm
Spine Length: 138mm
Blade Height: 29mm
Thickness of Spine at Handle: 1.8mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.3mm
Handle Length: Pakka Western
Weight: 86g
Saya/Guard: Purchase Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya ST - Tsuchime Damascus - 135mm Petty - Western Handle

Shapton - Whetstone - Professional Series - #1000

$50.00

Stone Length: 210mm
Stone Width: 70mm
Stone Height: 15.6mm
Stone Weight:

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Shapton - Whetstone - Professional Series - #1000

Hitohira - Ho Wood Saya - 210mm Gyuto (4.5mm)

$28.00

Measurements are for the inside of the Saya, these measurements should be larger than your knives measurements.
Total Internal Length: 229mm
Height at Opening: 53.5mm
Width of Opening at Spine: 4.5mm
Width of Opening at Edge: 2.4mm

*These Measurements were taken from one sample, there might be slight variations in each one*

Hitohira - Ho Wood Saya - 210mm Gyuto (4.5mm)

Hitohira - Hiragana - 300mm Bread Knife - Western Handle

$60.00

Brand: Hitohira ひとひら (一片)
Line: Hiragana
Profile: Bread
Edge Length: 300mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Bevel: Serrated
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Black Plastic Western
Total Length: 435mm
Spine Length: 300mm
Blade Height: 28mm
Thickness: 1.5mm
Handle Length: 135mm
Weight: 166g
Saya/Guard: No

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Hiragana - 300mm Bread Knife - Western Handle

Hitohira - Hiragana - 250mm Bread Knife - Western Handle

$45.00

Brand: Hitohira ひとひら (一片)
Line: Hiragana
Profile: Bread
Edge Length: 250mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Bevel: Serrated
Hand Orientation: Ambidextrous
Handle: Black Plastic Western
Total Length: 384mm
Spine Length: 250mm
Blade Height: 29mm
Thickness: 1.5mm
Handle Length: 133mm
Weight: 144g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Hiragana - 250mm Bread Knife - Western Handle

Hitohira - Imojiya MZ VG1 - 135mm Children's Knife - Pakka Handle

$75.00

Brand: Hitohira ひとひら (一片)
Made In: Japan
Line: Imojiya MZ VG1
Profile: Children's Santoku
Edge Length: 130mm
Blade Height: 40mm
Edge Steel: VG1
Steel Type: Stainless
Cladding: Stainless Cladding
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 250mm
Spine Length: 143mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 1.2mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 105mm
Weight: 105g
Saya/Guard: Purchase Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya MZ VG1 - 135mm Children's Knife - Pakka Handle

Hitohira - Magnolia Edge Guard - 250mm

$6.00

Brand: Hitohira ひとひら (一片)
Material: Magnolia
Length: 250mm
Width: 28mm
Height: 8mm
Weight: 24g

Shapton - Whetstone - Professional Series - #2000

$55.00

Stone Length: 210mm
Stone Width: 70mm
Stone Height: 15.6mm
Stone Weight: 538g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Shapton - Whetstone - Professional Series - #2000

Hitohira - Cutting Board - Kiri Wood - Large

$55.00

Dimensions:

Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.