Sujihiki/Slicer

Brand: Goko Hamono 五香刃物製作所
Line: Kogetsu 光月
Profile: Sujihiki
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: N/A, Mono-steel
Bevel: Double
Bevel Symmetry: 80/20
Hand Orientation: Right-handed
Handle: Pakka Western
Total Length: 370mm
Edge Length: 240mm
Spine Length: 245mm
Blade Height: 39mm 
Thickness at Spine: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 125mm
Weight: 161g
Saya/Guard: No

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Goko Hamono
Made in:  Chiba - Japan
Blacksmith: Yoshito Yamakawa 八間川義人
Line: Kogetsu
Profile: Sujihiki
Edge Length: 276mm
Blade Height: 49mm
Edge Steel: SK Carbon
Steel Type: Carbon
Grind: Convex
Construction: Mono-Steel
Finish: Unfinished Migaki (Purposeful) 
Bevel: Double
Bevel Symmetry: 80/20
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Steel
Total Length: 413mm
Spine Length: 280mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 126mm
Weight: 213g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: STEELPORT Knife Co.
Made In: Portland, Oregon - USA
Profile: Slicer
Edge Length: 255mm
Blade Height: 42mm
Edge Steel: 52100
HRC: 65
Steel Type: Carbon
Cladding: N/A 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Oregon Large Leaf Maple Burl w/ Integral Bolster
Total Length: 382mm
Spine Length: 252mm
Thickness of Spine at Handle: 3.1mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 130mm
Weight: 236g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.