16 products
Hitohira - Hinode - White #2 Nashiji - 270mm Sujihiki - Ho Wood Handle
Hitohira - Kikuchiyo x Mosuke - Enmon - White #1 Damascus - 270mm Kiritsuke - Taihei Ebony Handle
Brand: Hitohira ひとひら (一片)
Blacksmith: Kikuchiyo 菊千代
Sharpener: Mosuke モスケ
Profile: Kiritsuke
Edge Steel: White #1 (Shirogami)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Single Bevel
Hand Orientation: Right Handed
Handle: Ziricote Wa
Total Length: 430mm
Edge Length: 257mm
Spine Length: 278mm
Blade Height: 46mm
Thickness at Spine: 4.2mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.6
Handle Length: 152mm
Weight: 281g
Saya/Guard: Yes, Ho Wood
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.
Sakai Kikumori - Tanaka - Blue Super - So-Bokashi x Kasumi - 285mm Sakimaru Takobiki - No Handle - Signed
Brand: Sakai Kikumori 堺菊守
Made In: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka 田中
Line: Aogami Super
Profile: Takobiki
Edge Length: 280mm
Blade Height: 33.7mm
Edge Steel: Super Blue (Aogami Super)
Steel Type: Carbon
Grind: Single Bevel
Construction: Awase/Clad, Ni-Mai
Cladding: Soft Iron
Finish: Kasumi
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: N/A
Handle Material: N/A
Ferrule/Bolster Material: N/A
Total Length: 410mm
Spine Length: 390mm
Thickness of Spine at Handle: 2.9mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 2.3mm
Handle Length: N/A - tang is signed
Weight: 142g
Saya/Guard: Purchased Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.