In stock

Brand: Hitohira ひとひら (一片)
Product Type: Moribashi
Handle Material: Ebony
Size: (Full Length): 307mm
Handle Length: 120mm
Weight: 76g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Tosa
Made in: Tosa, Kochi - Japan
Profile: Santoku/Home Chef
Edge Length: 165mm
Blade Height: 47.7mm
Edge Steel: Shirogami #2 (white #2)
Steel Type: Carbon
Construction: Awase San-Mai (clad)
Cladding: Soft Iron
Finish: Kurouchi (forge finish)
Bevel: Double 
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle Shape: Oval Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Ziricote
Spine Length: 173mm
Thickness of Spine at Handle: 3mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: .2mm
Handle Length: 127mm
Total Length: 300mm
Weight: 128g
Saya/Guard: Sold Separately 

Brand: Hitohira ひとひら
Made in: Tosa-Kochi/ Japan
Line: Tosa
Profile: Petty 
Edge Length: 136mm
Blade Height: 36mm
Edge Steel: Blue (Aogami) #2
Steel Type: Carbon Steel 
Construction: Awase, San Mai
Cladding: Soft Iron
Finish: Kurouchi 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Walnut 
Ferrule/Bolster Material: Rengas
Spine Length: 150mm
Thickness of Spine at Handle: 3.9mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 115mm
Total Length: 263mm
Weight: 69g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Nagura

Nagura are very helpful in both increasing the efficiency of metal removal by adding grit on top of the stone, but also in creating unique, multi-grit slurry combinations important for polishing purposes. They can also be used to condition the surface of the sharpening stone after using a flattening plate.

Brand: NSK
Length: 40mm
Width: 18mm
Height: 15mm
Weight: 18g
Grit Range: #400

Brand: Sakai Kikumori 堺菊守
Made in: Kumamoto - Japan
Maker: Minomo Kajiya 蓑毛鍛冶屋
Line: MK
Profile: Gyuto
Edge Length: 248mm
Blade Height: 56.4mm
Edge Steel: Aogami #2/Blue #2
Steel Type: Carbon
Grind: Flat
Construction: Awase/San-Mai
Cladding: Soft Iron
Finish: Kurouchi (forge finish), Tsuchime (hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal Wa
Handle Material: Oak
Ferrule/Bolster Material: N/A
Total Length: 400mm
Spine Length: 265mm
Thickness of Spine at Handle: 4.1mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 1mm
Handle Length: 140mm
Weight: 257g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Made in: Kumamoto - Japan
Maker: Minomo Kajiya 蓑毛鍛冶屋
Line: MK
Profile: Gyuto
Edge Length: 216mm
Blade Height: 58.3mm
Edge Steel: Aogami #2/Blue #2
Steel Type: Carbon
Grind: Flat
Construction: Awase/San-Mai
Cladding: Soft Iron
Finish: Kurouchi (forge finish), Tsuchime (hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal Wa
Handle Material: Oak
Ferrule/Bolster Material: N/A
Total Length: 363mm
Spine Length: 230mm
Thickness of Spine at Handle: 4.4mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 134mm
Weight: 245g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Ryusen Hamono  株式会社 龍泉刃物
Made in:  Echizen, Fukui
Line: SOURYURIN
Profile: Gyuto
Edge Length: 172mm
Blade Height: 47mm
Edge Steel: VG-10
Steel Type: Stainless
Grind: Double Bevel
Construction: Awase/Clad, San-Mai
Cladding: Stainless Damascus
Finish: Polished Tsuchime
Bevel: Double 
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material:  Polyurethane Resin
Ferrule/Bolster Material: Steel
Total Length: 320mm
Spine Length: 190mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1mm
Handle Length: 127mm
Weight: 192g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Mizuno 水野製作所株式会社
Smith: Mizuno Seisakusho 水野製作所
Producing Area: Sanjo-Niigata/ Japan
Steel: S45C
Steel Type: Mono (Zenko) Carbon 
HRC: 55-56
Handle: Oak
Total Length: 460mm
Blade Length: 75mm
Thickness at Poll: 23mm
Weight: 970mm

Includes a Vinyl Sheath with snap & string.

Brand: Sakai Kikumori 堺菊守
Made in: Sakai, Osaka - Japan
Line: Tomoshibi
Profile: Yanagiba
Edge Length: 298mm
Blade Height: 40mm
Edge Steel: Shirogami #2/White #2
Steel Type: Carbon
Construction: Awase Ni-Mai
Cladding: Soft Iron
Finish: Migaki/Standard
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle: Right-Handed D-Shaped
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster: Black Horn Ferrule
Total Length: 450mm
Spine Length: 305mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 145mm
Weight: 199g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Mizuno 水野製作所株式会社
Smith: Mizuno Seisakusho 水野製作所
Producing Area: Sanjo-Niigata/ Japan
Steel Type: Carbon
Cladding: Soft Iron Clad 
HRC: 55-56
Handle: Curved Burnt Oak Handle
Total Length: 355mm
Edge Length: 80mm
Weight: 755g

Includes a Leather Sheath with snaps & Lanyard.

Brand: Kimura Glass

Line: Mikumi

Glass Type: Lead-Free Crystal

Total Height: 153mm

Base Diameter: 75mm

Cup Height: 39mm

Cup Diameter: 98mm

Stem Thickness: 4mm

Glass Thickness: 1mm

Weight: 69g

Total Length: 285mm
Blade Length: 122mm
Max Opening: 250mm
Weight: 337g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: Imojiya TH
Profile: Santoku
Edge Length: 182mm
Blade Hight: 46.5mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A mono-steel
Finish: Migaki (standard)
Bevel: Double Bevel (asymmetrical) 
Bevel Symmetry: 30/70
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 182mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: .4mm
Handle Length: 117mm
Total Length: 300mm
Weight: 156g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: TH
Profile: Bunka
Edge Length: 178mm
Blade Height: 46.5mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Double Bevel (Asymmetrical)
Bevel Symmetry: 20/80
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: Pakka
Spine Length: 185mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: .3mm
Handle Length: 140mm
Total Length: 325mm
Weight: 140g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: Hinode
Made in: Sanjo, Niigata - Japan
Smith: Mutsumi Hinoura 日野浦 睦
Profile: Petty/Utility
Edge Length: 196mm
Blade Height: 38.7mm
Edge Steel: Shirogami #2 (white #2)
Steel Type: Carbon
Construction: Awase San-Mai (clad)
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 30:70
Hand Orientation: Ambidextrous
Handle Shape: Oval
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 210mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: .2mm
Handle Length: 134mm
Total Length: 345mm
Weight: 127g
Saya/Guard: Sold Separately

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan 
Smith: Tanaka Blacksmith 田中打刃物製作所 
Sharpener: Ren
Line: Tanaka x Ren
Profile: Santoku
Edge Length: 171mm
Blade Height: 46mm
Edge Steel: White #2
Steel Type: Carbon
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 185mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 133mm
Total Length: 317mm
Weight: 128mm
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

120mm Petty
Brand: Taihei 
Material: Magnolia, Black Horn
Length: 116mm
Dimensions at Top: 19mm x 15mm
Dimensions at Bottom: 20mm x 16mm
Weight: 15g

210 Yanagiba
Brand: Taihei
Material: Magnolia, Black Horn
Length: 133.3mm
Dimensions at Top: 21mm x 15mm
Dimensions at Bottom: 23mm x 16mm
Weight: 21g

240 Yanagiba
Brand: Taihei
Material: Magnolia, Black Horn
Length: 139.9mm
Dimensions at Top: 22mm x 15mm
Dimensions at Bottom: 24mm x 16mm
Weight: 24g

270mm Yanagiba
Brand: Taihei
Material: Magnolia, Black Horn
Length: 143mm
Dimensions at Top: 22mm x 15mm
Dimensions at Bottom: 25mm x 18mm
Weight: 29g

300mm Yanagiba
Brand: Taihei
Material: Magnolia, Black Horn
Length: 146.1mm
Dimensions at Top: 22mm x 16mm
Dimensions at Bottom: 25mm x 18mm
Weight: 29g