New!

Brand: Hitohira ひとひら (一片)
Line: KIKUZUKI RIN
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka  田中
Profile: Kiritsuke Santoku
Edge Length: 260mm
Blade Height: 33mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Nashiji (Textured)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 272mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 140mm
Total Length: 411mm
Weight: 177g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: KIKUZUKI RIN
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka  田中
Profile: Kiritsuke Santoku
Edge Length: 168mm
Blade Height: 45mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Nashiji (Textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 185mm
Thickness of Spine at Handle: 
Thickness ½ way:
Thickness ~1cm from Tip: 
Handle Length: 127mm
Total Length: 311mm
Weight: 155g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: HADO
Line: Kirisame
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka 田中
Sharpener: Nomura
Profile: Petty/Utility
Edge Length: 143mm
Blade Height: 29mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji (Textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Scorched Oak
Ferrule/Bolster Material: N/A
Spine Length: 150mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 120mm
Total Length: 270mm
Weight: 87g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon with Stainless Cladding
This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: Ryusen Hamono  株式会社 龍泉刃物
Line: BLAZEN RYU WA
Made in: Echizen, Fukui - Japan
Profile: Sujihiki/Slicer
Edge Length: 259mm
Blade Height: 36mm
Edge Steel: SG2
Steel Type: Stainless
HRC: 62±
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji (Textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: N/A
Spine Length: 277mm
Thickness of Spine at Handle: 
Thickness ½ way: 3.7mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 1.0mm
Total Length: 418mm
Weight: 144g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.