New!

Brand: Florentine
Made in: Barcelona - Spain
Profile: Chopper
Edge Length: 167mm
Blade Height: 53mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 185mm
Thickness of Spine at Handle: 3mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1mm
Handle Length: 115mm
Total Length: 297mm
Weight: 210g
Saya/Gard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Chopper
Edge Length: 167mm
Blade Height: 53mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 185mm
Thickness of Spine at Handle: 3mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1mm
Handle Length: 115mm
Total Length: 297mm
Weight: 210g
Saya/Gard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Chopper
Edge Length: 167mm
Blade Height: 53mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 185mm
Thickness of Spine at Handle: 3mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1mm
Handle Length: 115mm
Total Length: 297mm
Weight: 210g
Saya/Gard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Chopper
Edge Length: 167mm
Blade Height: 53mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 185mm
Thickness of Spine at Handle: 3mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1mm
Handle Length: 115mm
Total Length: 297mm
Weight: 210g
Saya/Gard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Bread Knife
Edge Length: 244mm
Blade Height: 38mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Finish: Satin/Brushed
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 260mm
Thickness of Spine at Handle: 2.9mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 2.1mm
Handle Length: 116mm
Total Length: 375mm
Weight: 194g
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Bread Knife
Edge Length: 244mm
Blade Height: 38mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Finish: Satin/Brushed
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 260mm
Thickness of Spine at Handle: 2.9mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 2.1mm
Handle Length: 116mm
Total Length: 375mm
Weight: 194g
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Bread Knife
Edge Length: 244mm
Blade Height: 38mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Finish: Satin/Brushed
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 260mm
Thickness of Spine at Handle: 2.9mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 2.1mm
Handle Length: 116mm
Total Length: 375mm
Weight: 194g
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Utility/Chef
Edge Length: 201mm
Blade Height: 45mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 210mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 110mm
Total Length: 323mm
Weight: 143g
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Total Length:  240 mm
Blade Length:  123 mm
Handle Length:  117 mm
Spine Thickness:  2.5 mm
Blade Height:  21 mm
Weight:  74 g

Top quality hardened X46CR13 stainless steel (53-54HRC)

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Gabriel is among the finest axe makers working today. Over tens of thousands of hours at the forge, he has shaped thousands of axes, hatchets, and tools across an extraordinary range of patterns and purposes. Much of his work is carried out on machinery he designed, built, repaired, or modified himself, reflecting a maker who understands not just the tool, but the entire system behind it. Gabriel was also the founding employee and primary maker at a now well-established regional axe company, where he was hired to design, engineer, build, and operate the complete production process that continues to produce thousands of axes each year.

Since founding New England Axe & Tool (NEAT) in a workshop he once again designed, engineered, and built entirely by hand, from the electrical system to the final stud and finish. Every hammer, set of tongs, die, and stamp is made by Gabriel himself. Every piece of steel, wood, and leather in each NEAT tool is worked solely by Gabriel McNeil.

Gabriel’s work is defined by a rare union of metallurgical insight, mechanical mastery, and hands-on material expertise. The value of his tools is ultimately proven through their durability, balance, and uncompromising performance in use.

Brand: Northeast Axe & Tool
Smith: Gabriel McNeill
Line: Double Bit Felling Axe
Made In: Portland, Maine, USA
Edge Steel: 1055
Steel Type: Carbon
Finish: Kurouchi (forge finish)
Handle Material: Hickory w/ Walnut Wedge
Handle Length: 29" overall length
Cutting Edge: 8 3/8" Combined 
Head Weight: 2.5lb
Cover/Sheath: Yes, Leather Cover

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand:  Yoshida Hamono
Made in: Taku City, Saga - Japan
Line: ZDP189 Black(Kurouchi)
Profile: Bunka
Edge Length: 191mm
Blade Height: 51mm
Edge Steel: ZDP189
Steel Type: Semi-Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Kurouchi
Bevel: Double Bevel 
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Rosewood
Ferrule/Bolster Material: Pakka
Spine Length: 205mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 128mm
Total Length: 333mm
Weight: 157g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements

Care Advisement: Semi-Stainless

This blade is semi-stainless steel. It has better rust-resistance than standard carbon steel, but it is not completely stainless. Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: SOFTCUT Knife Co. 
Smith: Kiran Chapman
Sharpener: Kiran Chapman
Made in: Portland, ME
Line: 80CrV2 "Kuro"
Profile: Santoku
Edge Length: 173mm
Blade Height: 51mm
Edge Steel: 80CrV2
Steel Type: Carbon
Grind: Wide Bevel
Construction: Mono-Steel
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Charred Oak
Total Length: 312mm
Spine Length: 182mm
Thickness of Spine at Handle: 3mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 0.2mm
Handle Length: 130mm
Weight: 150g
Saya/Guard: Purchased Separately

Handmade in Maine by SOFTCUT Knife Co.

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Sakai-Osaka, Japan 
Smith: Togashi Blacksmith 富樫打刃物製作所 
Sharpener: Kenya Togashi 憲哉
Line: Tachi
Profile: Kiritsuke Yanagiba 
Edge Length: 287mm
Blade Height: 35.5mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Awase (clad), Ni Mai
Cladding: Soft Iron
Finish: Migaki (Standard)
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 304mm
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 4.4mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 143mm
Total Length: 445mm
Weight: 223g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics

Brand: Vachon Knives
Smith: Noah Vachon
Sharpener: Noah Vachon
Made in: Tomifobia, Quebec
Profile: Kiritsuke Petty
Edge Length: 260mm
Blade Height: 36mm
Edge Steel: AEB-L
Steel Type: Stainless
Construction: Mono-Steel
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry, Copper Ferrule 
Total Length: 185mm
Spine Length: 150m
Thickness of Spine at Handle: 2.4mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.1mm
Handle Length: 115mm
Weight: 165g
Saya/Guard:  Sold Separately

Brand: Hitohira ひとひら (一片)
Line: KIKUZUKI RIN
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka  田中
Profile: Kiritsuke Santoku
Edge Length: 260mm
Blade Height: 33mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Nashiji (Textured)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 272mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 140mm
Total Length: 411mm
Weight: 177g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Yoshida Hamono 吉田刃物株式会社
Made in: Taku City, Saga - Japan
Line: Damascus ZDP189
Profile: Santoku
Edge Length: 181mm
Blade Height: 47mm
Edge Steel: ZDP189
Steel Type: Semi-Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Rosewood
Ferrule/Bolster Material: Pakka
Total Length: 322mm
Spine Length: 195mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 128mm
Weight: 150g
Saya/Guard:  Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care Advisement: Semi-Stainless

This blade is semi-stainless steel. It has better rust-resistance than standard carbon steel, but it is not completely stainless. Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand:  Yoshida Hamono
Made in: Taku City, Saga - Japan
Line: ZDP189 Black(Kurouchi)
Profile: Santoku
Edge Length: 180mm
Blade Height: 46mm
Edge Steel: ZDP189
Steel Type: Semi-Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Kurouchi
Bevel: Double Bevel 
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Rosewood
Ferrule/Bolster Material: Pakka
Spine Length: 198mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1mm
Handle Length: 128mm
Total Length: 326mm
Weight: 150g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements

Care Advisement: Semi-Stainless

This blade is semi-stainless steel. It has better rust-resistance than standard carbon steel, but it is not completely stainless. Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: lionSTEEL
Made In: Maniago - Italy
Line: Twain
Style: Folding
Blade Profile: Drop Point
Grind: Flat
Blade Steel: MagnaCut
Steel Type: Stainless
Blade Length: 80mm
Blade Height: 26.3mm
Blade Thickness: 3.5mm
Blade Construction: Zenko (mono-steel)
Frame Construction: SOLID Titanium
Opening Mechanism: Nail Nick
Locking Mechanism: Button
Washers/Pivot System: Ball Bearings
Bolster: N/A
Pommel: N/A
Spacer/Spring: N/A
Handle/Scale Material: Titanium/Canvas
Handle/Scale Color: Titanium/Green Canvas
Blade Finish/Color: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Right Hand Locking
Handle Length: 105.7mm
Total Length Open: 183mm
Total Length Closed: 105.7mm 
Total Thickness: 13mm
Weight: 85g
Sheath/Clip: Belt Clip
Lanyard Hole: Yes

Brand: lionSTEEL
Line: TM1
Made In: Maniago - Italy
Style: Folding
Blade Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: Sleipner
Steel Type: Carbon
Blade Length: 84mm
Blade Height: 34.7mm
Blade Construction: Mono-Steel
Frame Construction: SOLID Micarta
Opening Mechanism: Thumb Stud
Locking Mechanism: Back Lock
Washers/Pivot System: IKBS Ball Bearings
Pommel: Tungsten Carbide Glass Breaker
Spacer/Spring: AISI 420 Stainless
Handle/Scale Material: Micarta
Handle/Scale Color: Black
Blade Finish/Color: Mil Spec
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 116mm
Total Length Open: 207mm
Total Length Closed: 120mm
Spine Thickness: 4.3mm
Weight: 144g
Sheath/Clip: Reversible Stainless Pocket Clip
Lanyard Hole: Yes

Brand: LionSTEEL
Line: Q4TTRO
Made In: Maniago, Italy
Style: Folding Knife
Blade Profile: Drop Point
Grind: Flat
Blade Steel: MagnaCut
Steel Type: Stainless
Blade Length: 84mm
Blade Height: 25.5mm
Blade Construction: Mono-Steel
Frame Construction: Scaled
Opening Mechanism: Removable Flipper, Front Flipper, Nail Nick
Locking Mechanism: Frame Lock
Washers/Pivot System: Double Crown Ball Bearings
Bolster: N/A
Pommel: N/A
Spacer/Spring: Titanium
Handle/Scale Material: Titanium/Carbon Fiber
Handle/Scale Color: Titanium/Carbon Fiber
Blade Finish/Color: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 110mm
Total Length Open: 200mm
Total Length Closed: 115mm
Spine Thickness: 3.8mm
Weight: 92g
Sheath/Clip: Titanium Clip
Lanyard Hole: Yes

Brand: LionSTEEL
Line: Q4TTRO
Made In: Maniago, Italy
Style: Folding Knife
Blade Profile: Drop Point
Grind: Flat
Blade Steel: MagnaCut
Steel Type: Stainless
Blade Length: 84mm
Blade Height: 25.5mm
Blade Construction: Mono-Steel
Frame Construction: Scaled
Opening Mechanism: Removable Flipper, Front Flipper, Nail Nick
Locking Mechanism: Frame Lock
Washers/Pivot System: Double Crown Ball Bearings
Bolster: N/A
Pommel: N/A
Spacer/Spring: Titanium
Handle/Scale Material: Titanium/Natural Canvas
Handle/Scale Color: Titanium/Natural Canvas
Blade Finish/Color: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 110mm
Total Length Open: 200mm
Total Length Closed: 115mm
Spine Thickness: 3.8mm
Weight: 92g
Sheath/Clip: Titanium Clip
Lanyard Hole: Yes