New!

Brand: Hitohira ひとひら
Line: Togashi White #1, Mizu Honyaki
Made in: Sakai, Osaka - Japan
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi
Profile: Fugubiki
Edge Length: 291mm
Blade Height: 32mm
Edge Steel: Shirogami #1 (white #1)
Steel Type: Carbon
Construction: Honyaki (Differentially Hardened)
Cladding: N/A
Finish: Mirror (Kyomen)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right Handed
Handle Shape: Octagonal
Handle Material: Makassar Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 309mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: .8mm
Handle Length: 144mm
Total Length: 452mm
Weight: 140g
Saya/Guard: Saya Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira

Made in: Sanjo, Niigata - Japan
Profile: Nakiri
Edge Length: 160mm
Blade Height: 51mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: D-Shape
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 180mm
Thickness of Spine at Handle: 4.8mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 1124mm
Total Length: 305mm
Weight: 146mm
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: HG
Made in: Seki-Gifu, Japan
Profile: Nakiri
Edge Length: 158mm
Blade Height: 45.5mm
Edge Steel: Unclassified
Steel Type: Stainless Steel
Construction: Awase(clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso), Tsuchime (Hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 177mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 2mm
Handle Length: 135mm
Total Length: 305mm
Weight: 148g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: HG
Made in: Seki, Gifu - Japan
Profile: Santoku
Edge Length: 185mm
Blade Height: 45.4mm
Edge Steel: Undisclosed Stainless Steel
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Stainless Damascus
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry
Ferrule/Bolster Material: Ebony
Spine Length: 195mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: .9mm
Handle Length: 135mm
Total Length: 330mm
Weight: 110g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Line: Kuma Blue #2
Made in: Seki-Gifu, Japan
Profile: Gyuto/Chef
Edge Length: 181mm
Blade Height: 41mm
Edge Steel: Aogami #2 (Blue #2)
HRC: 59±1HRC 
Steel Type: Carbon
Construction: Awase (clad)
Cladding: Soft Stainless 
Finish: Tsuchime (hammered)
Bevel: Double
Bevel Symmetry: Symmetrical
Hand Orientation: Ambidextrous 
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 184mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 115mm
Total Length: 302mm
Weight: 139g
Saya/Guard: Sold Separately

Brand: Hitohira ひとひら 
Line: HG Tsuchime Damascus
Made in: Seki-Gifu, Japan
Profile: Petty
Edge Length: 155mm
Blade Height: 29mm
Edge Steel: Unclassified
Steel Type: Stainless
Construction: Awase (clad), San Mai
Cladding: Soft Stainless
Finish: Tsuchime (hammered), Damascus (sekiso)
Bevel: Double
Bevel Symmetry: Symmetrical
Hand Orientation: Ambidextrous
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 161mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 125mm
Total Length: 285mm
Weight: 77g
Saya/Guard: Sold Separtely

Brand: Hitohira ひとひら
Line: Imojiya TH
Made in: Seki, Gifu - Japan 
Profile: Utility/Petty
Edge Length: 120mm
Blade Height: 27.7mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: Soft Stainless
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 120mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: .9mm
Handle Length: 103mm
Total Length: 228mm
Weight: 78mm
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: FJ
Made in: Seki, Gifu - Japan 
Profile: Gyuto
Edge Length: 230mm
Blade Height: 50mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double (Asymmetric) 
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed (Asymmetric) 
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 245mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: .6mm
Handle Length: 140mm
Total Length: 384mm
Weight: 150mm
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Made in: Tosa-Kochi/ Japan
Line: Blue #1
Profile: Santoku
Edge Length: 165mm
Blade Height: 46mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Awase (Clad), San Mai
Cladding: Soft Iron
Finish: Kurouchi (Forge Finish)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Ziricote
Spine Length: 178mm
Thickness of Spine at Handle: 3.6mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 128mm
Total Length: 305mm
Weight: 150g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Made in: Sakai, Osaka - Japan
Smith: Kenji Togashi 富樫
Sharpener: Kenya Togashi 憲哉
Line: Togashi Damascus
Profile: Gyuto
Edge Length: 230mm
Blade Height: 53.1mm
Edge Steel: Shirogami #1
Steel Type: Carbon
Construction: Awase (clad)
Cladding: Soft Iron
Finish: Damascus 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Burnt Yakusuji
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 245mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 145.6mm
Total Length: 392mm
Weight: 170g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Echizen-Fukui, Japan
Profile: Shakekiri
Edge Length: 272mm
Blade Height: 78mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad), Ni Mai
Cladding: Soft Iron
Finish: Kurouchi (forge finish)
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed 
Handle Shape: Oval
Handle Material: Poplar
Ferrule/Bolster Material: Plastic
Spine Length: 291mm
Thickness of Spine at Handle: 6.1mm
Thickness ½ way: 4.6mm
Thickness ~1cm from Tip: 1.9mm
Handle Length: 152mm
Total Length: 441mm
Weight: 437g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら 
Made in: Echizen, Fukui - Japan
Profile: Shakekiri
Edge Length: 241mm
Blade Height: 68mm
Edge Steel: Shirogami #2 (white #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval
Handle Material: Poplar
Ferrule/Bolster Material: Plastic Ferrule
Spine Length: 255mm
Thickness of Spine at Handle: 5.2mm
Thickness ½ way: 5.0mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 143mm
Total Length: 396mm
Weight: 288g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics. 

Brand: Hitohira ひとひら
Line: Ashi, White #2
Made in: Sakai, Osaka - Japan
Profile: Sujihiki
Edge Length: 272mm
Blade Height: 39mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Zenko (Mono-Steel)
Cladding: N/A, Mono-Steel
Finish: Migaki (Standard)
Bevel: Double (Asymmetric)
Bevel Symmetry: 40/60
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Spine Length: 277mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 128mm
Total Length: 405mm
Weight: 188g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: FJ
Made in: Seki-Gifu, Japan
Profile: Gyuto/Chef
Edge Length: 240mm
Blade Height: 50mm
Edge Steel: VG-10
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 242mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 120mm
Total Length: 365mm
Weight: 206g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら
Made in: Echizen-Fukui, Japan
Line: YG
Profile: Santoku/Home Chef
Edge Length: 168mm
Blade Height: 50mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (clad)
Cladding: Soft Iron
Finish: Nashiji (textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Ziricote
Spine Length: 182mm
Thickness of Spine at Handle: 5.3mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 128mm
Total Length: 310mm
Weight: 138g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: KH MV
Made in: Seki, Gifu - Japan
Profile: Deba
Edge Length: 183mm
Blade Height: 49mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Single
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Spine Length: 187mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 3.1mm
Thickness ~1cm from Tip: 2.5mm
Handle Length: 117mm
Total Length: 302mm
Weight: 222g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Imojiya TH
Made in: Seki, Gifu - Japan
Profile: Gyuto
Edge Length: 208mm
Blade Height: 45.8mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Finish: Migaki (standard)
Bevel: Asymmetric
Bevel Symmetry: 20:80
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: Pakka
Spine Length: 217mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 140mm
Total Length: 357mm
Weight: 151g
Saya/Guard: Sold Separately 

Brand: Hitohira ひとひら
Line: FJ VG10
Made in: Seki, Gifu - Japan
Profile: Bunka
Edge Length: 166mm
Blade Height: 49mm
Edge Steel: Mono VG10
Steel Type: Stainless
Construction: Zenko (Monosteel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Taihei Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 185mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 130mm
Total Length: 314mm
Weight: 107g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: Hinode
Made in: Sanjo, Niigata - Japan
Smith: Mutsumi Hinoura 日野浦 睦
Profile: Petty/Utility
Edge Length: 196mm
Blade Height: 38.7mm
Edge Steel: Shirogami #2 (white #2)
Steel Type: Carbon
Construction: Awase San-Mai (clad)
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 210mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: .2mm
Handle Length: 134mm
Total Length: 345mm
Weight: 127g
Saya/Guard: Sold Separately

Brand: Hitohira ひとひら
Line: Tosa
Made in: Tosa, Kochi - Japan
Profile: Santoku/Home Chef
Edge Length: 165mm
Blade Height: 47.7mm
Edge Steel: Shirogami #2 (white #2)
Steel Type: Carbon
Construction: Awase San-Mai (clad)
Cladding: Soft Iron
Finish: Kurouchi (forge finish)
Bevel: Double 
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle Shape: Oval Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Ziricote
Spine Length: 173mm
Thickness of Spine at Handle: 3mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: .2mm
Handle Length: 127mm
Total Length: 300mm
Weight: 128g
Saya/Guard: Sold Separately 

Brand: Hitohira ひとひら
Line: FJ VG-10
Made in: Seki, Gifu - Japan
Profile: Bunka
Edge Length: 172mm
Blade Height: 47mm
Edge Steel: VG-10
Steel Type: Stainless
HRC: 60±0.5
Construction: Zenko (Monosteel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 176mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 120mm
Total Length: 296mm
Weight: 152g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.