New!

Brand: Hitohira ひとひら (一片) 
Line: Imojiya TH Damascus
Profile: Gyuto
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Soft Stainless Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50 
Handle: Red Pakka Wa
Hand Orientation: Ambidextrious 
Total Length: 364mm
Edge Length: 206mm
Spine Length: 223mm
Blade Height: 46mm
Handle Length: 140mm
Thickness of Spine at Handle: 2.1mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 0.6mm
Weight: 160g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Nakiri
Steel Type: Unclassified Stainless 
Cladding: Soft Stainless Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50/50 
Hand Orientation: Ambidextrous 
Handle: Pakka Western
Total Length: 292mm 
Edge Length: 160mm 
Spine Length: 170mm 
Handle Length: 117mm 
Blade Height: 45mm 
Thickness of Spine at Handle: 1.2mm 
Thickness of Spine Half Way: 1.2mm 
Thickness of Spine ~1cm from Tip: 1mm 
Weight: 158g
Saya/Guard: Sold Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care Advisement: Stainless

This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Gyuto
Steel Type: Undisclosed Stainless 
Cladding: Soft Stainless (Damascus) 
Bevel: Double Bevel 
Bevel Symmetry: 50/50 
Hand Orientation: Ambidextrous 
Handle: Pakka (Western)
Total Length: 337mm 
Edge Length: 215mm 
Spine Length: 215mm 
Handle Length: 120mm 
Blade Height: 45mm 
Thickness of Spine at Handle: 1.8mm 
Thickness of Spine Half Way: 1.6mm 
Thickness of Spine ~1cm from Tip: 0.7mm 
Weight: 156g
Saya/Guard: Sold Separately 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Product Type: Moribashi
Handle Material: Ebony
Size: (Full Length): 357mm
Handle Length: 122mm
Weight: 86g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Product Type: Moribashi
Handle Material: Ebony
Size: (Full Length): 307mm
Handle Length: 120mm
Weight: 76g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Product Type: Moribashi
Handle Material: Satine
Size: (Full Length): 305mm
Handle Length:  121mm
Weight: 67g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Hiragana
Profile: Bread
Edge Length: 250mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless 
Bevel: Serrated 
Hand Orientation: Right-Handed
Handle: Black Plastic Western
Total Length:  384mm
Spine Length: 250mm
Blade Height: 29mm
Thickness: 1.5mm
Handle Length: 133mm
Weight: 144g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Smith: Kikuchiyo 菊千代
Profile: Deba
Edge Steel: Blue #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Single
Hand Orientation: Right Handed
Handle: Ho Wood
Total Length: 370mm
Edge Length: 215mm
Spine Length: 232mm
Blade Height: 61mm
Thickness at Spine: 8.1mm
Thickness ½ way: 7.2mm
Thickness ~1cm from Tip: 5.1mm
Handle Length: 140mm
Weight: 486g
Saya: Ho Wood

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Morihei 
Line: Inox
Profile: Gyuto
Edge Length: 240mm
Blade Height: 50mm
Edge Steel: SUS-440
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A (Mono-steel)
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 40/60Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 240
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 127mm
Total Length: 367mm
Weight: 215g
Saya/Guard: Not Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Total Length: 150mm
Blade Length: 64mm
Handle Length: 85mm
Blade Height: 16mm
Weight: 54g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Dimensions: 450mm x 295mm x 20mm

Weight: 691g

Material: Kiri Wood (Paulownia).

Notes: While technically a hardwood, Kiri Wood is particularly soft on knife edges. It is extremely light, resistant to decay, and has an even higher strength to weight ratio than balsa wood. Kiri Wood's lightweight makes it ideal for taking on hikes, picnics, camping, or simply as an everyday board. Due to its low density and low hardness, it is not advised to be used for heavy-duty work like butcher cleaving, sawing, or forceful impacts. Native to East Asia.

Care: Wash with warm, soapy water, only using something scrubby or abrasive when needed, otherwise use the soft-side of a sponge or simply a towel or rag. Wipe as dry as possible. Once fully dry, store flat if possible. Use food-safe oil or wax blend when the board feels dry, you do not need to constantly oil. Do not let soak. At your discretion you can use a fairly high-grit sandpaper to condition the surface to remove discoloration and maring; oil afterwards.

Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber  and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Total Length: 200mm

Head Length: 60mm

Head Width: 35mm

Weight: 107g

Total Length: 175mm

Head Length: 45mm

Head Width: 25mm

Weight: 74g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

This is the best cutting board in the world, seriously! Not harvested until a ripe 250-300 years old, Hiba trees grow in the Aomori Prefecture in Northern Honshu and are a part of the cypress family. Aomori Hiba wood makes for an ideal cutting surface because of it's softness, it won't damage blade edges. Additionally, due to a compound called Hinokitiol, Aomori Hiba wood is naturally somewhat antimicrobial and germicidal and is very rot and mold resistant. Because of these factors Aomori Hiba wood is traditionally often reserved for building shrines and temples in Japan. It also smells amazing!

380mm x 520mm x 30mm

Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber  and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Due to their unique dimensions, the shipping rate for cutting boards is $12/board.

This is the best cutting board in the world, seriously! Not harvested until a ripe 250-300 years old, Hiba trees grow in the Aomori Prefecture in Northern Honshu and are a part of the cypress family. Aomori Hiba wood makes for an ideal cutting surface because of it's softness, it won't damage blade edges. Additionally, due to a compound called Hinokitiol, Aomori Hiba wood is naturally somewhat antimicrobial and germicidal and is very rot and mold resistant. Because of these factors Aomori Hiba wood is traditionally often reserved for building shrines and temples in Japan. It also smells amazing!

475mm x 230mm x 30mm, ~1556g

Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements. The board may warp overtime, store flat.

Due to their unique dimensions, the shipping rate for cutting boards is $12/board.

This is the best cutting board in the world, seriously! Not harvested until a ripe 250-300 years old, Hiba trees grow in the Aomori Prefecture in Northern Honshu and are a part of the cypress family. Aomori Hiba wood makes for an ideal cutting surface because of it's softness, it won't damage blade edges. Additionally, due to a compound called Hinokitiol, Aomori Hiba wood is naturally somewhat antimicrobial and germicidal and is very rot and mold resistant. Because of these factors Aomori Hiba wood is traditionally often reserved for building shrines and temples in Japan. It also smells amazing!

Length: 377mm
Width: 205mm
Height: 28mm
Weight: 1123g

Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber  and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)  
Profile: Oyster
Edge Length: 97mm
Hand Orientation: Ambidextrious 
Handle: Ho Wood
Total Length: 212mm 
Handle Length: 115mm
Blade Height:  16mm
Thickness of Spine at Handle: 2.8mm
Thickness of Spine Half Way:  2.6mm
Thickness of Spine ~1cm from Tip: 2.4mm
Weight: 83g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira
Line: T10
Profile: Gyuto
Edge Length: 172mm
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Western 
Total Length: 298mm
Spine Length: 177mm
Blade Height: 46mm
Thickness at Spine: 1.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 120mm
Weight: 149g
Saya: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.