Culinary Knives

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Petty
Edge Length: 127mm 
Blade Height: 36mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 140mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 113mm
Total Length: 252mm
Weight: 115g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Nakiri
Edge Length: 164mm 
Blade Height: 59mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 176mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 136mm
Total Length: 312mm
Weight: 199g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Santoku
Edge Length: 173mm 
Blade Height: 55mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 184mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 128mm
Total Length: 311mm
Weight: 166g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Gyuto
Edge Length: 205mm 
Blade Height: 54mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 215mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 136mm
Total Length: 352mm
Weight: 192g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら 
Made in: Japan
Line: Futana
Profile: Gyuto
Edge Length:
Blade Height:
Edge Steel: Super Aogami (Super Blue)
Steel Type: Carbon
Construction: Awase (clad), San Mai
Cladding: Soft Stainless
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal
Handle Material: Jindai Elm
Ferrule/Bolster Material: Ebony
Spine Length:
Thickness of Spine at Handle:
Thickness ½ way:
Thickness ~1cm from Tip:
Handle Length:
Total Length:
Weight:
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片) 
Line: Futana - Super Blue
Profile: Gyuto
Edge Length: 247mm 
Edge Steel: Blue (Aogami) Super
Steel Type: Carbon
Cladding: Stainless Kurouchi Tsuchime
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal 
Total Length: 401mm
Spine Length:  255mm
Blade Height: 49mm
Thickness: 1.8mm
Handle Length: 145mm
Weight: 171g 
Saya: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Made in: Sakai-Osaka/ Japan 
Smith: Kikuchiyo 菊千代 
Sharpener: Rikichi 利吉
Line: Kikuchiyo x  Rikichi 
Profile: Sakai-Osaka/ Japan
Edge Length: 141mm
Blade Height: 26mm
Edge Steel: Yasuki Blue (Aogami) #2
Steel Type: Carbon
Construction: Awase/Clad, Ni-Mai
Cladding: Soft Stainless
Finish: Migaki
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed 
Handle Shape: Octagonal
Handle Material: Ho Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 154mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 131mm
Total Length: 289mm
Weight: 83g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Yoshida Hamono
Line: HAP40 Black
Made In: Taku City, Saga - Japan
Profile: Bunka
Edge Steel: HAP40
Steel Type: Carbon
Cladding Material: Stainless Steel
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle: Lacquered Urushi Flame
Total Length: 333mm
Edge Length: 190mm
Spine Length: 203mm
Blade Height: 51mm
Thickness at Spine: 2.1mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 128mm
Weight: 191g
Saya/Guard: Purchased Separately 

Brand: Yoshida Hamono
Line: HAP40 Black
Made In: Taku City, Saga - Japan
Profile: Bunka
Edge Steel: HAP40
Steel Type: Carbon
Cladding Material: Stainless Steel
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle: Lacquered Golden Dust
Total Length: 333mm
Edge Length: 190mm
Spine Length: 203mm
Blade Height: 51mm
Thickness at Spine: 2.1mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 128mm
Weight: 161g
Saya/Guard: Purchased Separately