Brand: Hitohira ひとひら (一片)
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi
Made In: Sakai-Osaka, Japan
Profile: Gyuto
Edge Length: 199mm
Blade Height: 48mm
Edge Steel: Blue (Aogami) #1
Steel Type: Carbon
Cladding: Stainless Kasumi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Octagonal Ebony & Buffalo Horn Ferrule
Total Length: 356mm
Spine Length: 214mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 142mm
Weight: 172g
Saya/Guard: Purchased Separately.
Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.
Care Advisements: This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.
You may also like
Made In: Sanjo, Niigata - Japan
Line: Kengata Single Bevel Hatchet
Smith: Hinoura Blacksmith 日野浦刃物
Sharpener: Hinoura Blacksmith 日野浦刃物
Style: Single Bevel Kengata
Steel: Shirogami #2/White #2
Steel Type: Carbon
Edge Length: 219mm
Blade Height: 48mm
Blade Thickness: 5mm
Blade Construction: Awase, Ni-Mai
Blade Finish/Color: Kurouchi (forge finish)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Bolster: Iron
Pommel: N/A
Handle/Tang Construction: Partial Tang
Handle Material: Oak
Handle Length: 168mm
Total Length: 391mm
Weight: 401g
Sheath/Clip: Belt Sheath
Made In: Sanjo, Niigata - Japan
Line: Kengata Single Bevel Hatchet
Smith: Hinoura Blacksmith 日野浦刃物
Sharpener: Hinoura Blacksmith 日野浦刃物
Style: Single Bevel Kengata
Steel: Shirogami #2/White #2
Steel Type: Carbon
Edge Length: 193mm
Blade Height: 49.5mm
Blade Thickness: 5.3mm
Blade Construction: Awase, Ni-Mai
Blade Finish/Color: Kurouchi (forge finish)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Bolster: Iron
Pommel: N/A
Handle/Tang Construction: Partial Tang
Handle Material: Oak
Handle Length: 167mm
Total Length: 365mm
Weight: 395g
Sheath/Clip: Belt Sheath
Blade Length: 168mm
Thickness at Spine: 6.3mm
Weight: 513g
Blade Length: 168mm
Thickness at Spine: 6.3mm
Weight: 513g
Blade Length: 215mm
Handle Length: 210mm
Blade Height: 47mm
Thickness of Blade: 6.5mm
Bevel: Single
Handle Orientation: Right Handed
Steel Type: Carbon
Weight: 577g
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.
Brand: Ajikataya
Made in: Sanjo, Japan
Line: Nashiji
Profile: Sujihiki
Edge Length: 280mm
Blade Height: 44mm
Edge Steel: White #2 (Shirogami)
Steel Type: Carbon
Grind: Wide Bevel
Construction: Awase/Clad, San-Mai
Cladding: Soft Iron
Finish: Kurouchi Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia
Ferrule/Bolster Material: Buffalo Horn
Total Length: 440mm
Spine Length: 295mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 144mm
Weight: 182g
Saya/Guard: Purchased Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.