Carbon

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Ajikataya
Made in: Sanjo, Japan
Line: Nashiji
Profile: Sujihiki
Edge Length: 280mm
Blade Height: 44mm
Edge Steel: White #2 (Shirogami)
Steel Type: Carbon
Grind: Wide Bevel
Construction: Awase/Clad, San-Mai
Cladding: Soft Iron
Finish: Kurouchi Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia
Ferrule/Bolster Material: Buffalo Horn
Total Length: 440mm
Spine Length: 295mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 144mm
Weight: 182g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Anevay Stoves
Made In: Redruth - England
Full Height: 220mm
Top Diameter: 60mm
Top Diameter: 57mm
Weight: 336g

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Classic Range 
Profile: Santoku
Edge Length: 177mm
Blade Height: 52mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi, Nashiji, Damascus, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: English Walnut Handle
Ferrule/Bolster Material: Copper
Spine Length: 189mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 128mm
Total Length: 317mm 
Weight: 173g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Classic Range 
Profile: Gyuto
Edge Length: 222mm 
Blade Height: 55mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi, Nashiji, Damascus, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: English Walnut Handle
Ferrule/Bolster Material: Copper
Spine Length: 230mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 137mm
Total Length: 367mm 
Weight: 187g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Petty
Edge Length: 127mm 
Blade Height: 36mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 140mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 113mm
Total Length: 252mm
Weight: 115g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Nakiri
Edge Length: 164mm 
Blade Height: 59mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 176mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 136mm
Total Length: 312mm
Weight: 199g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Santoku
Edge Length: 173mm 
Blade Height: 55mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 184mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 128mm
Total Length: 311mm
Weight: 166g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Gyuto
Edge Length: 205mm 
Blade Height: 54mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 215mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 136mm
Total Length: 352mm
Weight: 192g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Coutellerie Maria
Made In: Saint-Laurent-du-Var - France
Line: BabyDog
Style: Folding, Friction
Blade Profile: Drop Point
Grind: Concave
Blade Steel: XC75
Steel Type: Carbon
Blade Length: 43mm
Blade Height: 20.5mm
Blade Thickness: 1.7mm
Blade Construction: Mono-Steel
Frame Construction: Unibody
Opening Mechanism: Thumb Lever
Locking Mechanism: Friction/Thumb Lever
Handle/Scale Material: Stainless Steel
Handle/Scale Color: Silver
Blade Finish/Color: Satin, Forge Finish
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 66.5mm
Total Length Open: 111.5mm
Total Length Closed: 66.5mm
Total Thickness: 5mm
Weight: 39mm
Sheath/Clip: Purchased Separately
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Coutellerie Maria
Made In: Saint-Laurent-du-Var - France
Line: BigDog
Style: Folding
Blade Profile: Drop Point
Grind: Concave
Blade Steel: XC75
Steel Type: Carbon
Blade Length: 80mm
Blade Height: 35mm
Blade Construction: Mono-Steel
Frame Construction: Solid
Opening Mechanism: Two Fingers/Pinch
Locking Mechanism: Friction/Thumb Lever
Handle/Scale Material: Ebony
Handle/Scale Color: Natural Wood
Blade Finish/Color: Forced Patina
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 120mm
Total Length Open: 202mm
Total Length Closed: 120mm
Spine Thickness: 2.5mm
Weight: 163g
Sheath/Clip: Purchased Separately
Lanyard Hole: N/A

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Coutellerie Maria
Made In: Saint-Laurent-du-Var - France
Line: Canif
Style: Folding, Slip Joint
Blade Profile: Drop Point
Grind: Flat
Blade Steel: XC75
Steel Type: Carbon
Blade Length: 85m
Blade Height: 19.2mm
Blade Construction: Mono-Steel
Frame Construction: Scaled
Opening Mechanism: Two-Handed Pinch
Locking Mechanism: N/A, Slip Joint
Spacer/Spring: Stainless
Handle/Scale Material: Stainless Scales, Brass Liners
Handle/Scale Color: Multicolor
Blade Finish/Color: Satin
Bevel: Double 
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 110mm
Total Length Open: 195mm
Total Length Closed: 110mm
Spine Thickness: 1.6mm
Weight: 116g
Sheath/Clip: N/A
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Goko Hamono 五香刃物製作所
Smith: Kogetsu 光月
Line: Mono SK
Profile: Gyuto
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: N/A, Mono-steel
Bevel: Double
Bevel Symmetry: 80/20
Hand Orientation: Right-handed
Handle: Pakka Western
Total Length: 310mm
Edge Length: 185mm
Spine Length: 185mm
Blade Height: 45mm
Thickness at Spine: 1.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 115mm
Weight: 162g
Saya/Guard: Purchased Separately 

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Kogetsu 光月
Smith: Goko Hamono 五香刃物製作所
Line: Mono SK
Profile: Gyuto
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: N/A, Mono-steel
Bevel: Double
Bevel Symmetry: 20:80
Hand Orientation: Right-handed
Handle: Pakka Western
Total Length: 330mm
Edge Length: 207mm
Spine Length: 210mm
Blade Height: 48mm
Thickness at Spine: 1.6mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 116mm
Weight: 192g
Saya/Guard: Purchased Separately 

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Goko Hamono
Made in:  Chiba - Japan
Blacksmith: Yoshito Yamakawa 八間川義人
Line: Kogetsu
Profile: Sujihiki
Edge Length: 276mm
Blade Height: 49mm
Edge Steel: SK Carbon
Steel Type: Carbon
Grind: Convex
Construction: Mono-Steel
Finish: Unfinished Migaki (Purposeful) 
Bevel: Double
Bevel Symmetry: 80/20
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Steel
Total Length: 413mm
Spine Length: 280mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 126mm
Weight: 213g
Saya/Guard: Purchased Separately 

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.