in stock

Brand: Ryusen Hamono  株式会社 龍泉刃物
Line: GURENHIRYU KAI 
Made in: Echizen, Fukui - Japan
Profile: Sujihiki/Slicer
Edge Length: 258mm
Blade Height: 37mm
Edge Steel: SPG STRIX
Steel Type: Stainless
HRC: 65±
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Stabilized Poplar Wood
Ferrule/Bolster Material: Stabilized Poplar Wood
Spine Length: 287mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 136mm
Total Length: 423mm
Weight: 160g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Vachon Knives
Smith: Noah Vachon
Sharpener: Noah Vachon
Made in: Tomifobia, Quebec
Profile: Kiritsuke Petty
Edge Length: 260mm
Blade Height: 36mm
Edge Steel: AEB-L
Steel Type: Stainless
Construction: Mono-Steel
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry, Copper Ferrule 
Total Length: 185mm
Spine Length: 150m
Thickness of Spine at Handle: 2.4mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.1mm
Handle Length: 115mm
Weight: 165g
Saya/Guard:  Sold Separately

Brand: Hitohira ひとひら (一片)
Line: MINAMO
Made in: Sakai, Osaka - Japan
Profile: Kiritsuke Santoku/Home Chef
Edge Length: 170mm
Blade Height: 52mm
Edge Steel: ATS34
Steel Type: Stainless
Construction: Awase (Clad); San Mai
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Caramel Horn
Spine Length: 187mm
Thickness of Spine at Handle: 2.4mm 
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.2mm
Handle Length: 128mm
Total Length: 312mm
Weight: 175g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: MINAMO
Made in: Sakai, Osaka - Japan
Profile: Nakiri/Vegetable
Edge Length: 167mm
Blade Height: 60mm
Edge Steel: ATS34
Steel Type: Stainless
Construction: Awase (Clad); San Mai
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Caramel Horn
Spine Length: 185mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 135mm
Total Length: 318mm
Weight: 174g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Farol
Line: Encan
Made In: France
Handle Material: Ebony
Handle Color: Ebony
Locking System: Lever Back
Opening System: Two Finger
Blade Shape: Standard
Blade Steel: Stainless
Blade Length: 90mm
Blade Height: 19mm
Blade Finish/Color: Mirror
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 123mm
Total Length Open: 215mm
Total Length Closed: 125mm
Spine Thickness: 2.6mm
Weight: 51g
Sheath/Clip: No Clip/Sheath 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: Imojiya TH
Made in: Seki, Gifu - Japan
Profile: Petty/Utility
Edge Length: 121mm
Blade Height: 27mm
Edge Steel: DSR-1K6 
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: N/A
Spine Length: 128mm
Thickness of Spine at Handle: 1.2mm 
Thickness ½ way: 0.9mm
Thickness ~1cm from Tip: 0.1mm
Handle Length: 116mm
Total Length: 243mm
Weight: 65g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: FJ
Made in: Seki, Gifu - Japan
Profile: Petty/Utility
Edge Length: 125mm 
Blade Height: 28mm 
Edge Steel: VG-10
Steel Type: Stainless
HRC: 60±0.5HRC
Construction: Zenko (Mono-Steel)
Cladding: N/A 
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 128mm
Thickness of Spine at Handle: 1.2mm
Thickness ½ way: 0.8mm
Thickness ~1cm from Tip: 0.2mm
Handle Length: 104mm 
Total Length: 232mm 
Weight: 75g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: Futana
Made in: Tosa, Kochi - Japan 
Profile: Santoku/Home Chef
Edge Length: 168mm
Blade Height: 48mm 
Edge Steel: Alleima 19C27
Steel Type: Stainless
HRC: 60±1
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji (Textured), Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 183mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.2mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 135mm 
Total Length: 319mm 
Weight: 122g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: HG
Made in: Seki, Gifu - Japan 
Profile: Nakiri/Vegetable
Edge Length: 160mm
Blade Height: 44mm
Edge Steel: Unclassified
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 177mm
Thickness of Spine at Handle: 1.1mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 135mm
Total Length: 310mm
Weight: 121g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Made in: Seki, Gifu - Japan
Line: Imojiya TH
Profile: Nakiri
Edge Length: 165mm
Blade Height: 47.5mm
Edge Steel:  DSR-1K6
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Asymmetric Double 
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 177mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 139mm
Total Length: 320mm
Weight: 149g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: FJ
Made in: Seki-Gifu, Japan 
Profile: Santoku
Edge Length: 175mm 
Blade Height: 46mm 
Edge Steel: VG10 
Steel Type: Stainless
HRC:  60±0.5
Construction: Zenko (Mono-Steel)
Cladding: N/A 
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 177mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 0.9mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 122mm 
Total Length: 297mm 
Weight: 149g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: Hiragana
Made in: Seki, Gifu - Japan 
Profile: Cake Knife
Edge Length: 303mm 
Blade Height: 41mm  
Edge Steel: AUS-8 
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A (Mono-Steel)
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 40/60
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 313mm 
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 132mm 
Total Length: 445mm 
Weight: 240g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Morihei 森平
Line: INOX
Profile: Honesuki Kaku
Edge Length: 150mm 
Blade Height: 41mm
Edge Steel: SUS-440
Steel Type: Stainless
HRC: 59±1HRC 
Construction: Zenko (Mono-Steel)
Cladding: N/A (Mono-Steel)
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed 
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 152mm 
Thickness of Spine at Handle: 2.4mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 106mm 
Total Length: 260mm 
Weight: 179g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Made in: Seki, Gifu - Japan
Line: Imojiya TH
Profile: Honesuki Kaku
Edge Length: 149mm
Blade Height: 38mm 
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Finish: Migaki (Standard)
Bevel: Double (Asymmetric)
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: N/A
Spine Length: 154mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 130mm
Total Length: 281mm
Weight: 129g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Stainless Steel
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally betwxeen preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: TH
Profile: Bunka
Edge Length: 178mm
Blade Height: 46.5mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Double Bevel (Asymmetrical)
Bevel Symmetry: 20/80
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: Pakka
Spine Length: 185mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: .3mm
Handle Length: 140mm
Total Length: 325mm
Weight: 121g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: HG Damascus
Made in: Seki, Gifu - Japan 
Profile: Gyuto/Chef
Edge Length: 218mm 
Blade Height: 46mm 
Edge Steel: Unclassified
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 224mm 
Thickness of Spine at Handle: 
Thickness ½ way: 
Thickness ~1cm from Tip: 
Handle Length: 146mm 
Total Length: 370mm
Weight: 128g 
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Higonokami かね駒 
Made In: Miki-Hyogo/ Japan 
Smith: Mitsuo Nagao 永尾 光雄 
Line: VG10
Style: Friction Folder
Blade Profile: Kiritsuke
Grind:  Flat w/ Edge Bevel
Blade Steel: VG10
Steel Type: Stainless  
Blade Length: 72mm
Blade Height: 13mm
Blade Thickness: 2.5mm
Blade Construction: Awase (Clad)
Frame Construction: Unibody
Opening Mechanism: Thumb Pad 
Locking Mechanism: Friction Folder
Washers/Pivot System: N/A
Bolster: N/A
Pommel: N/A
Spacer/Spring: N/A
Handle/Scale Material: Brass and leather
Handle/Scale Color: Black leather
Blade Finish/Color: Nashiji (Textured)
Bevel:  Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous  
Handle Length:  98mm 
Total Length Open: 170mm 
Total Length Closed: 100mm
Total Thickness: 7.5mm
Weight: 47g
Sheath/Clip: Sold Separately
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: lionSTEEL
Line: H2
Made In: Maniago - Italy
Style: Fixed
Profile: Karambit
Grind: Flat w/ Edge Bevel
Blade Steel: M390
Steel Type: Stainless
Blade Length: 77mm
Blade Height: 28.5mm
Blade Thickness: 3.6mm
Blade Construction: Mono-Steel
Handle/Tang Construction: SOLID Handle
Bolster/Hilt: Spine Jimping
Pommel: Finger Hole
Handle Material: Natural Micarta
Handle Color: Natural Micarta
Blade Finish/Color: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 84.5mm
Total Length: 187mm
Weight: 108g
Sheath/Clip: Kydex Belt Sheath
Lanyard Hole: N/A

Brand: lionSTEEL
Line: H2
Made In: Maniago - Italy
Style: Fixed
Profile: Karambit
Grind: Flat w/ Edge Bevel
Blade Steel: M390
Steel Type: Stainless
Blade Length: 77mm
Blade Height: 28.5mm
Blade Thickness: 3.6mm
Blade Construction: Mono-Steel
Handle/Tang Construction: SOLID Handle
Bolster/Hilt: Spine Jimping
Pommel: Finger Hole
Handle Material: Green Micarta
Handle Color: Green
Blade Finish/Color: Satin/Brushed 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 84.5mm
Total Length: 187mm
Weight: 108g
Sheath/Clip: Kydex Belt Sheath
Lanyard Hole: N/A

Brand: lionSTEEL
Line: Barlow
Made In: Maniago, Italy
Style: Folding Knife
Blade Profile: Round Head
Grind: Flat w/ Edge Bevel
Blade Steel: M390
Steel Type: Stainless
Blade Length: 67mm
Blade Height: 16mm
Blade Construction: Mono-Steel
Frame Construction: Scaled
Opening Mechanism: Nail Nick
Locking Mechanism: Slip Joint
Washers/Pivot System: Bronze Washers
Bolster: Stainless Steel
Pommel: N/A
Spacer/Spring: Stainless Steel
Handle/Scale Material: White Carbon Fiber
Handle/Scale Color: White Carbon Fiber
Blade Finish/Color: Satin
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 95mm
Total Length Open: 170mm
Total Length Closed: 95mm
Spine Thickness: 2mm
Weight: 65g
Sheath/Clip: Purchased Separately
Lanyard Hole: N/A

Brand: lionSTEEL
Line: Barlow
Made In: Maniago, Italy
Style: Folding Knife
Blade Profile: Round Head
Grind: Flat w/ Edge Bevel
Blade Steel: M390
Steel Type: Stainless
Blade Length: 67mm
Blade Height: 16mm
Blade Construction: Mono-Steel
Frame Construction: Scaled
Opening Mechanism: Nail Nick
Locking Mechanism: Slip Joint
Washers/Pivot System: Bronze Washers
Bolster: Stainless Steel
Pommel: N/A
Spacer/Spring: Stainless Steel
Handle/Scale Material: Natural Canvas
Handle/Scale Color: Natural Canvas
Blade Finish/Color: Satin
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 95mm
Total Length Open: 170mm
Total Length Closed: 95mm
Spine Thickness: 2mm
Weight: 65g
Sheath/Clip: Purchased Separately
Lanyard Hole: N/A