in stock

Brand: Nigara 二唐刃物鍛造所
Line: SPG Strix
Made in: Aomori, Japan
Smith: Nigara Homono
Profile: Gyuto
Edge Length: 197mm
Blade Height: 51mm
Edge Steel: SPG STRIX
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 211mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: .8mm
Handle Length: 135mm
Total Length: 345mm
Weight: 172g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Nigara 二唐刃物鍛造所
Line: SPG STRIX
Made in: Aomori - Japan
Profile: Santoku
Edge Length: 168mm
Blade Height: 51mm
Edge Steel: SPG STRIX
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft Stainless
Finish: Tsuchime Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 182mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: .7mm
Handle Length: 130mm
Total Length: 310mm
Weight: 158g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Nigara 二唐刃物鍛造所
Line: VG Xeos
Made in: Aomori, Japan
Smith: Nigara Homono 
Profile: Santoku
Edge Length: 173mm
Blade Height: 50.5mm
Edge Steel: VG Xeos
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 188mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: .8mm
Handle Length: 130mm
Total Length: 317mm
Weight: 158g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: HADO
Line: Shiosai
Made in: Sakai, Osaka - Japan
Sharpener: Tadataka Maruyama
Profile: Kiritsuke Gyuto
Edge Length: 199mm
Blade Height: 48.3mm
Edge Steel: SG2
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless 
Finish: Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal
Handle Material: Oak 
Spine Length: 217mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: .6mm
Handle Length: 140mm
Total Length: 355mm
Weight: 152g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: HADO
Line: Shiosai
Made in: Sakai, Osaka - Japan
Sharpener: Tadataka Maruyama
Profile: Bunka
Edge Length: 171mm
Blade Height: 50mm
Edge Steel: SG2
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Oak
Ferrule/Bolster Material: N/A
Spine Length: 188mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: .6mm
Handle Length: 135mm
Total Length: 320mm
Weight: 140mm
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Sakai Kikumori
Line: Seiun
Made in: Sakai - Japan
Smith: Satoshi Nakagawa 
Profile: Gyuto
Edge Length: 201mm
Blade Height: 48mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft stainless Damascus
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 215mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1mm
Handle Length: 128mm
Total Length: 342mm
Weight: 182g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Sakai Kikumori
Line: Seiun
Made in: Sakai - Japan
Smith: Satoshi Nakagawa 
Profile: Santoku
Edge Length: 170mm
Blade Height: 48mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft stainless Damascus
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 187mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1mm
Handle Length: 129mm
Total Length: 314mm
Weight: 175mm
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira

Made in: Sanjo, Niigata - Japan
Profile: Nakiri
Edge Length: 160mm
Blade Height: 51mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: D-Shape
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 180mm
Thickness of Spine at Handle: 4.8mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 1124mm
Total Length: 305mm
Weight: 146mm
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: HG
Made in: Seki-Gifu, Japan
Profile: Nakiri
Edge Length: 158mm
Blade Height: 45.5mm
Edge Steel: Unclassified
Steel Type: Stainless Steel
Construction: Awase(clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso), Tsuchime (Hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 177mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 2mm
Handle Length: 135mm
Total Length: 305mm
Weight: 148g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: HG
Made in: Seki, Gifu - Japan
Profile: Santoku
Edge Length: 185mm
Blade Height: 45.4mm
Edge Steel: Undisclosed Stainless Steel
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Stainless Damascus
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry
Ferrule/Bolster Material: Ebony
Spine Length: 195mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: .9mm
Handle Length: 135mm
Total Length: 330mm
Weight: 110g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Line: HG Tsuchime Damascus
Made in: Seki-Gifu, Japan
Profile: Petty
Edge Length: 155mm
Blade Height: 29mm
Edge Steel: Unclassified
Steel Type: Stainless
Construction: Awase (clad), San Mai
Cladding: Soft Stainless
Finish: Tsuchime (hammered), Damascus (sekiso)
Bevel: Double
Bevel Symmetry: Symmetrical
Hand Orientation: Ambidextrous
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 161mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 125mm
Total Length: 285mm
Weight: 77g
Saya/Guard: Sold Separtely

Brand: Hitohira ひとひら
Line: Imojiya TH
Made in: Seki, Gifu - Japan 
Profile: Utility/Petty
Edge Length: 120mm
Blade Height: 27.7mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: Soft Stainless
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 120mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: .9mm
Handle Length: 103mm
Total Length: 228mm
Weight: 78mm
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in: Japan
Line:  TD Blue #2
Profile: Santoku
Edge Length: 166mm
Blade Height: 48mm
Edge Steel: Aogami #2/Blue #2
Steel Type: Carbon
Grind: Wide Double Bevel
Construction: Awase, San-Mai
Cladding: Soft Stainless
Finish: Kurouchi (forge finish)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Right-Handed D-Shaped
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 308mm
Spine Length: 180mm
Thickness of Spine at Handle: 4.7mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 130mm
Weight: 127g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Ryusen  株式会社 龍泉刃物
Made in: Echizen, Japan
Line: Botenunryu KAI
Profile: Gyuto
Edge Length: 239mm
Blade Height: 49.3mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (clad), San Mai
Cladding: Soft Stainless
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Quince and blue dyed maple spacer
Ferrule/Bolster Material: Buffalo horn
Spine Length: 257mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: .3mm 
Handle Length: 136mm
Total Length: 394mm
Weight: 165g
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Ryusen  株式会社 龍泉刃物
Made in: Echizen, Japan
Line: Botenunryu KAI
Profile: Petty/Utility
Edge Length: 136mm
Blade Height: 27mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (clad), San Mai
Cladding: Soft Stainless
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Quince and blue dyed maple spacer
Ferrule/Bolster Material: Buffalo horn
Spine Length: 147mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: .6mm
Handle Length: 116mm
Total Length: 260mm
Weight: 60g
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.