Mouth blown by master glassblowers, contemporary cocktail glasses with fine bowls and hand-drawn stems.
Due to its handmade nature, the size of this item may vary slightly.
Mouth blown by master glassblowers, contemporary cocktail glasses with fine bowls and hand-drawn stems.
Due to its handmade nature, the size of this item may vary slightly.
Brand: Kanatoko 鍛冶工房 金床
Made In: Fukuyama, Hiroshima -Japan
Craftsperson: Kazuyoshi Akita 秋田 和良
Materials: Iron
Outer Diameter: 300mm
Inner Diameter: 235mm
Thickness: 2.3mm
Height: 41mm
Handle Length: 260mm
Pan Weight: 1907g
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Hardcover | Clarkson Potter | 1216 pages
Brand: Naniwa ナニワ研磨工業
Product Type: Flattening Stone
Grit: #220
Size: 170×55×30mm
Weight: 440g
Brand: Hitohira ひとひら (一片)
Made in: Sanjo-Niigata/Japan
Line: TD
Profile: Gyuto
Edge Length: 166mm
Blade Height: 33mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon Steel
Construction: Awase
Cladding: Soft Stainless Clad
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Bird's Eye Maple
Total Length: 308mm
Spine Length: 184mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 3mm
Thickness ~1cm from Tip: 1mm
Handle Length: 125mm
Weight: 125g
Saya/Guard: Purchase separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care Advisement: Carbon with Stainless Cladding
This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.
Brand: Hitohira ひとひら (一片)
Made in: Seki-Gifu/ Japan
Line: KH
Profile: Gyuto
Edge Length: 210mm
Blade Height: 46mm
Edge Steel: Unclassified (Stainless Steel)
Steel Type: Stainless
Hardness: 60±1HRC
Construction: Mono-steel
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Olive Wood
Ferrule/Bolster Material: Ebony Wood
Spine Length: 225mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: .8mm
Handle Length: 140mm
Total Length: 363mm
Weight: 135g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.