You may also like
Brand: Hitohira
Made in: Kumamoto - Japan
Wood Type: Lacquered Oak
Ferrule Material: N/A Mono-wood
Shape: Octagonal
Length: 130mm
Width at Top: 18mm
Depth at Top: 23mm
Width at Bottom: 21mm
Depth at Bottom: 25.5mm
Weight: 43g
Recommended: Santoku/210mm Gyuto
Please Note: These pictures and measurements are examples. Individual products may differ slightly in appearance and measurements.
Brand: Hitohira ひとひら
Made in: Sanjo-Niigata/ Japan
Wood Type: Wenge
Ferrule Material: N/A Mono-wood
Shape: Octagonal
Length: 130mm
Width at Top: 18mm
Depth at Top: 23mm
Width at Bottom: 19.5mm
Depth at Bottom: 25.5mm
Weight: 43g
Recommended: Santoku/Nakiri/210mm Gyuto
Please Note: These pictures and measurements are examples. Individual products may differ slightly in appearance and measurements.
Brand: Kanehide
Made in: Seki - Gifu/ Japan
Line: Hirakiri
Profile: Gyuto
Edge Length: 269mm
Blade Height: 51mm
Edge Steel: Unclassified
Steel Type: Semi-Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle Shape: Western (Yo) Handle
Handle Material: Rosewood
Spine Length: 270mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: .8mm
Handle Length: 118mm
Total Length: 387mm
Weight: 199g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care Advisement: Semi-Stainless
This blade is semi-stainless steel. It has better rust-resistance than standard carbon steel, but it is not completely stainless. Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Brand: Kanehide
Made in: Seki - Gifu/ Japan
Line: Hirakiri
Profile: Gyuto
Edge Length: 240mm
Blade Height: 47mm
Edge Steel: Unclassified
Steel Type: Semi-Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle Shape: Western (Yo) Handle
Handle Material: Rosewood
Spine Length: 2.5mm
Thickness of Spine at Handle:
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 118mm
Total Length: 358mm
Weight: 175g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care Advisement: Semi-Stainless
This blade is semi-stainless steel. It has better rust-resistance than standard carbon steel, but it is not completely stainless. Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Brand: Hitohira ひとひら
Line: FJ VG-10
Made in: Seki, Gifu - Japan
Profile: Gyuto
Edge Length: 200mm
Blade Height: 45mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western (Yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 203mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .7mm
Handle Length: 120mm
Total Length: 323mm
Weight: 157g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.
Brand: Hitohira ひとひら (一片)
Line: Imojiya TH
Made in: Seki, Gifu - Japan
Profile: Nakiri
Edge Length: 165mm
Blade Height: 47mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: N/A
Spine Length: 177mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 128mm
Total Length: 305mm
Weight: 143g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.