in stock

Brand: Hitohira ひとひら (一片)
Made in: Japan
Profile: Yanagiba
Edge Length: 228mm 
Blade Height: 32mm 
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad), Ni Mai
Cladding: Soft Iron
Finish: Kurouchi (Forge Finish)
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: D-Shape
Handle Material: Poplar
Ferrule/Bolster Material: Plastic
Spine Length: 244mm 
Thickness of Spine at Handle: 3.6mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 135mm  
Total Length: 378mm
Weight: 184g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Tosa-Kochi/ Japan
Line: Tosa
Profile: Nakiri
Edge Length: 168mm
Blade Height: 56mm
Edge Steel: Blue (Aogami) #2
Steel Type: Carbon Steel 
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Ziricote
Spine Length: 189mm
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 128mm
Total Length: 317mm
Weight: 157g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Tosa-Kochi/ Japan
Line: Tosa
Profile: Nakiri
Edge Length: 168mm
Blade Height: 60mm
Edge Steel: Blue (Aogami) #2
Steel Type: Carbon Steel 
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Rengas Wood
Spine Length: 188mm
Thickness of Spine at Handle: 4.4mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 128mm
Total Length: 135mm
Weight: 154g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.