in stock

Brand: Hitohira ひとひら (一片)
Line: KH
Made in: Seki, Gifu - Japan 
Profile: Nakiri/Vegetable
Edge Length: 184mm 
Blade Height: 49mm 
Edge Steel: Unclassified
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed 
Handle Shape: Western
Handle Material: Imitation Mahogany
Ferrule/Bolster Material: Stainless Steel
Spine Length: 188mm 
Thickness of Spine at Handle: 1.4mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 120mm 
Total Length: 308mm 
Weight: 196g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: Hizen
Made in: Saga - Japan
Profile: Ajikiri 
Edge Length: 105mm
Blade Height: 36mm 
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Kurouchi (Forge Finish)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 117mm 
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 114mm 
Total Length: 230mm 
Weight: 68g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: Hizen
Made in: Saga - Japan
Profile: Ajikiri 
Edge Length: 148mm 
Blade Height: 35mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Kurouchi (Forge Finish)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 158mm 
Thickness of Spine at Handle: 3.0mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 115mm 
Total Length: 273mm
Weight: 80g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: Tanaka x Ren
Made in: Sakai, Osaka - Japan 
Smith: Yoshikazu Tanaka  田中
Sharpener: Ren
Profile: Santoku/Home Chef
Edge Length: 170mm 
Blade Height: 46mm 
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 185mm 
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 135mm 
Total Length: 318mm
Weight: 173g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: Harima
Made in: Miki, Hyogo - Japan 
Profile: Bunka
Edge Length: 185mm 
Blade Height: 47mm 
Edge Steel: Aogami Super (Blue Super)
Steel Type: Carbon
Construction: Awase (Clad), San Mai
Cladding: Soft Staineless
Finish: Kurouchi (Forge Finish)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka 
Spine Length: 198mm 
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 128mm 
Total Length: 327mm
Weight: 141g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon with Stainless Clad
This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: Fog Linen
Line: Kitchen Cloth
Material: 100% Linen
Color: Red and Natural
Length: 25.5"
Width: 17.5"

Our hardest-working kitchen staple, and an all-time customer favorite. These cloths are with us from start-to-finish on all cooking tasks—drying dishes, lining a basket, keeping kettles warm, covering dough to rise, and cleaning up spills. Durable, long-lasting, and complete with a nifty cotton loop for an easy hang-dry. They'll grow softer and more absorbent with every wash.

Care: Machine wash gentle, dry cool or line-dry.

Brand: Fog Linen
Line: Kitchen Cloth
Material: 100% Linen
Color: Brown and Natural
Length: 25.5"
Width: 17.5"

Our hardest-working kitchen staple, and an all-time customer favorite. These cloths are with us from start-to-finish on all cooking tasks—drying dishes, lining a basket, keeping kettles warm, covering dough to rise, and cleaning up spills. Durable, long-lasting, and complete with a nifty cotton loop for an easy hang-dry. They'll grow softer and more absorbent with every wash.

Care: Machine wash gentle, dry cool or line-dry.

Brand: Fog Linen
Line: Kitchen Cloth
Material: 100% Linen
Color: Blue and Natural
Length: 25.5"
Width: 17.5"

Our hardest-working kitchen staple, and an all-time customer favorite. These cloths are with us from start-to-finish on all cooking tasks—drying dishes, lining a basket, keeping kettles warm, covering dough to rise, and cleaning up spills. Durable, long-lasting, and complete with a nifty cotton loop for an easy hang-dry. They'll grow softer and more absorbent with every wash.

Care: Machine wash gentle, dry cool or line-dry.

Brand: Fog Linen
Line: Kitchen Cloth
Material: 100% Linen
Color: Blue and Orange
Length: 25.5"
Width: 17.5"

Our hardest-working kitchen staple, and an all-time customer favorite. These cloths are with us from start-to-finish on all cooking tasks—drying dishes, lining a basket, keeping kettles warm, covering dough to rise, and cleaning up spills. Durable, long-lasting, and complete with a nifty cotton loop for an easy hang-dry. They'll grow softer and more absorbent with every wash.

Care: Machine wash gentle, dry cool or line-dry.

Brand: Fog Linen
Line: Kitchen Cloth
Material: 100% Linen
Color: Iris
Length: 25.5"
Width: 17.5"

Our hardest-working kitchen staple, and an all-time customer favorite. These cloths are with us from start-to-finish on all cooking tasks—drying dishes, lining a basket, keeping kettles warm, covering dough to rise, and cleaning up spills. Durable, long-lasting, and complete with a nifty cotton loop for an easy hang-dry. They'll grow softer and more absorbent with every wash.

Care: Machine wash gentle, dry cool or line-dry.

Brand: HADO
Line: Kirisame
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka 田中
Sharpener: HADO
Profile: Gyuto/Chef
Edge Length: 230mm
Blade Height: 50mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji (Textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Scorched Oak
Ferrule/Bolster Material: N/A
Spine Length: 243mm
Thickness of Spine at Handle: 3.2mm
Thickness ½ way: 2.7mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 145mm
Total Length: 387mm
Weight: 211g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon with Stainless Cladding
This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: HADO
Line: Kirisame
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka 田中
Sharpener: HADO
Profile: Gyuto/Chef
Edge Length: 200mm
Blade Height: 46mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji (Textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Scorched Oak
Ferrule/Bolster Material: N/A
Spine Length: 215mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 140mm
Total Length: 355mm
Weight: 163g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon with Stainless Cladding
This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: HADO
Line: Kirisame
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka 田中
Sharpener: HADO
Profile: Santoku/Home Chef
Edge Length: 171mm
Blade Height: 46mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji (Textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Scorched Oak
Ferrule/Bolster Material: N/A
Spine Length: 183mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 130mm
Total Length: 319mm
Weight: 160g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon with Stainless Cladding
This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: HADO
Line: Kirisame
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka 田中
Sharpener: HADO
Profile: Bunka
Edge Length: 170mm
Blade Height: 51mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji (Textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Scorched Oak
Ferrule/Bolster Material: N/A
Spine Length: 187mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 135mm
Total Length: 320mm
Weight: 172g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon with Stainless Cladding
This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: HADO
Line: Kirisame
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka 田中
Sharpener: HADO
Profile: Ko Bunka
Edge Length: 128mm
Blade Height: 47mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji (Textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Scorched Oak
Ferrule/Bolster Material: N/A
Spine Length: 144mm
Thickness of Spine at Handle: 3.2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 135mm
Total Length: 271mm
Weight: 122g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon with Stainless Cladding
This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: HADO
Line: Kirisame
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka 田中
Sharpener: HADO
Profile: Petty/Utility
Edge Length: 143mm
Blade Height: 29mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji (Textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Scorched Oak
Ferrule/Bolster Material: N/A
Spine Length: 150mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 120mm
Total Length: 270mm
Weight: 87g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon with Stainless Cladding
This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: Kudo Knife Forge
Line: VG10 Damascus
Made in: Sapporo, Hokkaido - Japan 
Smith: Hirota Kudo 
Profile: Bunka
Edge Length: 211mm
Blade Height: 56mm
Edge Steel: VG-10
Steel Type: Stainless
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nickel Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal
Handle Material: Rosewood 
Ferrule/Bolster Material: Pakka
Spine Length: 227mm 
Thickness of Spine at Handle: 3.2mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 134mm 
Total Length: 361mm 
Weight: 173g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: Tanaka
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka  田中
Sharpener: 
Profile: Yanagiba
Edge Length: 268mm
Blade Height: 33mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Awase (Clad), Ni Mai
Cladding: Soft Iron
Finish: Migaki (Standard)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-handed
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 274mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 140mm
Total Length: 411mm
Weight: 193g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: Futana
Made in: Tosa, Kochi - Japan 
Profile: Gyuto/Chef
Edge Length: 217mm 
Blade Height: 46mm 
Edge Steel: Alleima 19C27
Steel Type: Stainless
HRC: 60±1
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji (Textured), Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 230mm 
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 145mm
Total Length: 376mm
Weight: 142g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Isamitsu 
Line: White #1 Stainless Clad
Made in: Ibaraki - Japan
Smith: Abe Isamitsu Blacksmith 安倍勇光打ち刃物
Profile: Santoku/Home Chef
Edge Length: 185mm
Blade Height: 53mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Kurouchi (Forged)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Rosewood
Ferrule/Bolster Material: Wood (Unspecified)
Spine Length: 202mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 140mm
Total Length: 340mm
Weight: 206g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Carbon with Stainless Clad
This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: Imojiya TH Damascus
Made in: Area: Seki, Gifu -Japan
Profile: Santoku/Home Chef
Edge Length: 174mm 
Blade Height: 47mm 
Edge Steel: VG-10
Steel Type: Stainless
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: Pakka
Spine Length: 192mm 
Thickness of Spine at Handle: 
Thickness ½ way: 
Thickness ~1cm from Tip:
Handle Length: 139mm 
Total Length: 330mm
Weight: 156g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.