in stock

Brand: Nigara Hamono 二唐刃物鍛造所
Made in: Aomori - Japan
Line: SG STRIX
Profile: Petty/Utility
Edge Length: 142mm
Blade Height: 36mm
Edge Steel: SPG STRIX
Steel Type: Stainless
Construction: Awase (clad), San Mai
Cladding: Soft Stainless
Finish: Tsuchime (hammered), Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal 
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 150mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 115mm
Total Length: 268mm
Weight: 93g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Nigara Hamono 二唐刃物鍛造所 
Made In:  Aomori, Japan
Style: Folding Knife
Blade Profile: Drop Point
Grind: Flat
Blade Steel: SG2
Steel Type: Stainless
Blade Length: 98mm 
Blade Height: 29mm
Blade Thickness: 3.4mm
Blade Construction: Awase (Clad)
Frame Construction: Scaled
Opening Mechanism: Flipper
Locking Mechanism: Frame Lock
Washers/Pivot System: Ball Bearing
Bolster: N/A
Pommel: N/A
Spacer/Spring: Stainless Steel
Handle/Scale Material: Carbon Fiber, Titanium 
Handle/Scale Color: Black
Blade Finish/Color: Kurouchi (forge finish), Tsuchime (hammered)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous   
Handle Length: 132mm 
Total Length Open: 232mm 
Total Length Closed: 133mm
Total Thickness: 12mm
Weight: 162g
Sheath/Clip: Pocket Clip
Lanyard Hole: No

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Nigara Hamono 二唐刃物鍛造所 
Made In:  Aomori, Japan
Style: Folding Knife
Blade Profile: Drop Point
Grind: Flat
Blade Steel: SG2
Steel Type: Stainless
Blade Length: 98mm 
Blade Height: 29mm
Blade Thickness: 3.4mm
Blade Construction: Awase (Clad)
Frame Construction: Scaled
Opening Mechanism: Flipper
Locking Mechanism: Frame Lock
Washers/Pivot System: Ball Bearing
Bolster: N/A
Pommel: N/A
Spacer/Spring: Stainless Steel
Handle/Scale Material: G10, Titanium 
Handle/Scale Color: Black, White
Blade Finish/Color: Kurouchi (forge finish), Tsuchime (hammered)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous   
Handle Length: 132mm 
Total Length Open: 232mm
Total Length Closed: 132mm
Total Thickness: 11.9mm
Weight: 167g
Sheath/Clip: Pocket Clip
Lanyard Hole: No

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Nigara Hamono 二唐刃物鍛造所 
Made In:  Aomori, Japan
Style: Folding Knife
Blade Profile: Drop Point
Grind: Flat
Blade Steel: SG2
Steel Type: Stainless
Blade Length: 100mm  
Blade Height: 29mm
Blade Thickness: 3.3mm
Blade Construction: Awase (Clad)
Frame Construction: Scaled
Opening Mechanism: Flipper
Locking Mechanism: Frame Lock
Washers/Pivot System: Ball Bearing
Bolster: N/A
Pommel: N/A
Spacer/Spring: Stainless Steel
Handle/Scale Material: Micarta, Titanium 
Handle/Scale Color: Black
Blade Finish/Color: Kurouchi (forge finish), Tsuchime (hammered)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous   
Handle Length: 132mm  
Total Length Open: 232mm
Total Length Closed: 132mm
Total Thickness: 12.4
Weight: 164g 
Sheath/Clip: Pocket Clip
Lanyard Hole: No

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Tetsujin 鉄人刃物
Made in: Kochi, Japan
Smith: Toru Tamura 田村 徹
Sharpener: Naohito Myojin
Profile: Santoku/Home Chef
Edge Length: 176mm
Blade Height: 49mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Kasumi (Mist)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Taihei Rosewood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 185mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 130mm
Total Length: 318mm
Weight: 145g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: Tanaka x Manzo
Made in: Sakai, Osaka - Japan 
Smith: Tanaka Blacksmith 田中打刃物製作所 
Sharpener: Manzō 万造
Profile: Yanagiba
Edge Length: 263mm
Blade Height: 33mm 
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad), Ni Mai
Cladding: Soft Iron
Finish: Kido (diagonal pattern)
Bevel: Single Bevel
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 274mm
Thickness of Spine at Handle: 3.8mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 143mm
Total Length: 417mm
Weight: 205g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement:This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Kogetsu 五香刃物 
Made in: Chiba/ Japan
Smith: Goko Hamono 五香刃物製作所
Line: Mandai 
Profile: Petty/Utility
Edge Length: 150mm
Blade Height: 31mm
Edge Steel: Unclassified
Steel Type: Stainless Steel
Construction: Zenko (mono-steel)
Cladding: N/A Mono-Steel
Finish: Migaki (standard)
Bevel: Double Bevel
Bevel Symmetry: 80/20
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Imitation Mahogany
Ferrule/Bolster Material: Stainless Steel
Spine Length: 155mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.2mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 106mm
Total Length: 260mm
Weight: 100g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Nigara 二唐刃物鍛造所
Line: SPG Strix
Made in: Aomori, Japan
Smith: Nigara Homono
Profile: Gyuto
Edge Length: 197mm
Blade Height: 51mm
Edge Steel: SPG STRIX
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 211mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: .8mm
Handle Length: 135mm
Total Length: 345mm
Weight: 172g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Line: Kikuchiyo x Manzo
Made in: Sakai,Osaka - Japan 
Smith: Kikuchiyo 菊千代 
Sharpener: Manzō 万造
Profile: Yanagiba
Edge Length: 288mm 
Blade Height: 37mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad), Ni Mai
Cladding: Soft Iron
Finish: Kido (diagonal pattern)
Bevel: Single Bevel
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle Shape: Octagonal 
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 303mm
Thickness of Spine at Handle: 4.2mm
Thickness ½ way: 4.0mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 142mm
Total Length: 452mm
Weight: 224g  
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Nigara 二唐刃物鍛造所
Line: SPG STRIX
Made in: Aomori - Japan
Profile: Santoku
Edge Length: 168mm
Blade Height: 51mm
Edge Steel: SPG STRIX
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft Stainless
Finish: Tsuchime Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 182mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: .7mm
Handle Length: 130mm
Total Length: 310mm
Weight: 158g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Nigara 二唐刃物鍛造所
Line: VG Xeos
Made in: Hirosaki, Aomori - Japan
Smith: Nigara Hamono 
Profile: Santoku
Edge Length: 173mm
Blade Height: 50.5mm
Edge Steel: VG Xeos
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 188mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: .8mm
Handle Length: 130mm
Total Length: 317mm
Weight: 158g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: HADO 刃道
Line: Sumi
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka  田中
Sharpener: Tadataka Maruyama
Profile: Gyuto
Edge Length: 200mm
Blade Height: 45mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry Bark with Oak Core
Ferrule/Bolster Material: N/A
Spine Length: 215mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: .5mm
Handle Length: 140mm
Total Length: 355mm
Weight: 170g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Line: Kikuzuki Uzu
Made in: Sakai - Japan
Smith: Tanaka Uchihamono 田中打刃物
Profile: Petty/Utility
Edge Length: 140mm
Blade Height: 29mm
Edge Steel: Aogami #1 (blue #1)
Steel Type: Carbon
Construction: Awase (clad)
Cladding: Soft Iron Damascus
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn 
Spine Length: 152mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 124mm
Total Length: 275mm
Weight: 65g
Saya/Guard: Sold Separately 

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Brand: Roberto Otonello
Made in: Maron, Genoa - Italy
Line: Gravity Knife
Profile: Straight Back
Edge Length: 70mm
Blade Height: 21.8mm
Edge Steel: VG-10
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Damascus
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Material: Stainless Steel
Ferrule/Bolster Material: N/A
Total Length Open: 175mm
Total Length Closed: 100mm
Spine Length: 75mm
Thickness of Spine at Handle: 2.9mm
Thickness ½ way: 2.7mm
Thickness ~1cm from Tip: 1.1mm 
Handle Length: 100mm
Handle Height: 27mm
Handle Thickness: 8mm
Weight: 92g
Saya/Guard: Leather Pouch

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Nigara 二唐刃物鍛造所
Line: VG Xeos
Made in: Hirosaki, Aomori - Japan
Smith: Nigara Hamono
Profile: Gyuto
Edge Length: 242mm
Blade Height: 51mm
Edge Steel: VG Xeos
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 256mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: .7mm
Handle Length: 140mm
Total Length: 396mm
Weight: 211g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Nigara 二唐刃物鍛造所
Line: VG Xeos
Made in: Hirosaki, Aomori - Japan
Smith: Nigara Hamono
Profile: Gyuto
Edge Length: 212mm
Blade Height: 49mm
Edge Steel: VG Xeos
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 226mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: .7mm
Handle Length: 235mm
Total Length: 360mm
Weight: 178mm
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Ashi
Made in: Sakai, Osaka - Japan
Smith: Ashi Hamono 芦刃物製作所
Profile: Gyuto
Edge Length: 273mm
Blade Height: 51.2mm
Edge Steel: Swedish Stainless Steel
Steel Type: Stainless
Construction: Zenko (Monosteel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 274mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.2mm
Thickness ~1cm from Tip: .3mm
Handle Length: 124mm
Total Length: 400mm
Weight: 246mm
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Jordan Kepler
Made In: Portland, Maine - USA
Line: Puukko 
Style: Fixed 
Profile: Drop Point
Grind: Convex 
Blade Steel: 80CrV2
Steel Type: Carbon Steel
Blade Length: 4" (100mm)
Blade Height: 25.7mm
Blade Thickness: 2.5mm
Blade Construction: Mono-Steel
Handle/Tang Construction: Stick-Tang
Bolster: Brass
Pommel: Brass
Handle Material: Makassar Ebony
Handle Color: Natural Wood
Blade Finish/Color: Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Length: 120mm 
Total Length: 226mm
Weight: 110g
Sheath/Clip: Leather Sheath w/ Belt Clip
Lanyard Hole: N/A

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Goko Hamono 五香刃物製作所
Line: Kogetsu 光月
Made in: Kashiwa City, Chiba - Japan
Smith: Yoshito Yamakawa 八間川義人
Profile: Gyuto/Chef
Edge Length: 305mm
Blade Height: 62mm
Edge Steel: SK5
Steel Type: Carbon
Construction: Zenko (mono-steel)
Cladding: N/A Mono-steel
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: ~10/90
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Spine Length: 305mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 143mm
Total Length: 448mm
Weight: 339g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Jordan Kepler
Made In: Portland, Maine - USA
Line: Puukko 
Style: Fixed 
Profile: Drop Point
Grind: Convex 
Blade Steel: 80CrV2
Steel Type: Carbon Steel
Blade Length: 3.75" (97mm)
Blade Height: 26.1mm
Blade Thickness: 2.6mm
Blade Construction: Mono-Steel
Handle/Tang Construction: Stick-Tang
Bolster: Brass
Pommel: Brass
Handle Material: Rosewood
Handle Color: Natural Wood
Blade Finish/Color: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Length: 123mm 
Total Length: 225mm
Weight: 134g
Sheath/Clip: Leather Sheath w/ Belt Clip
Lanyard Hole: N/A

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Miyazaki Kaijya
Line: Hineri Damascus
Made in: Goto Islands, Nagasaki - Japan
Smith: Haruo Miyazaki 宮崎 春生
Sharpener: Haruo Miyazaki 宮崎 春生
Profile: Tsubaki (Bunka)
Edge Length: 175mm
Blade Height: 53mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon Steel
Construction: Awase (Clad), Warikomi
Cladding: Soft Iron Damascus 
Finish: Forced Patina
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Oval Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length:  192mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1mm
Thickness ~1cm from Tip: .5mm
Handle Length: 134mm
Total Length: 324mm
Weight: 153g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.