in stock

Brand: HADO
Line: Kirisame
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka 田中
Sharpener: Nomura
Profile: Gyuto/Chef
Edge Length: 200mm
Blade Height: 46mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji (Textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Scorched Oak
Ferrule/Bolster Material: N/A
Spine Length: 215mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 140mm
Total Length: 355mm
Weight: 163g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon with Stainless Cladding
This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: Kudo Knife Forge
Line: VG10 Damascus
Made in: Sapporo, Hokkaido - Japan 
Smith: Hirota Kudo 
Profile: Bunka
Edge Length: 211mm
Blade Height: 56mm
Edge Steel: VG-10
Steel Type: Stainless
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nickel Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal
Handle Material: Rosewood 
Ferrule/Bolster Material: Pakka
Spine Length: 227mm 
Thickness of Spine at Handle: 3.2mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 134mm 
Total Length: 361mm 
Weight: 173g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: Futana
Made in: Tosa, Kochi - Japan 
Profile: Gyuto/Chef
Edge Length: 217mm 
Blade Height: 46mm 
Edge Steel: Alleima 19C27
Steel Type: Stainless
HRC: 60±1
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji (Textured), Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 230mm 
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 145mm
Total Length: 376mm
Weight: 142g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Ryusen Hamono  株式会社 龍泉刃物
Line: FUKAKURYU KAI
Made in: Echizen, Fukui - Japan
Profile: Kiritsuke Gyuto/Chef
Edge Length: 225mm
Blade Height: 46mm
Edge Steel: ATS314
Steel Type: Stainless
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Stabilized Birch Wood
Ferrule/Bolster Material: Stabilized Birch Wood
Spine Length: 226mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 128mm
Total Length: 353mm
Weight: 155g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Ryusen Hamono  株式会社 龍泉刃物
Line: GURENHIRYU KAI 
Made in: Echizen, Fukui - Japan
Profile: Kiritsuke Gyuto/Chef
Edge Length: 207mm
Blade Height: 48mm
Edge Steel: SPG STRIX
Steel Type: Stainless
HRC: 65±
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Stabilized Poplar Wood
Ferrule/Bolster Material: Stabilized Poplar Wood
Spine Length: 230mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 128mm
Total Length: 358mm
Weight: 148g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

 Brand: Ryusen Hamono  株式会社 龍泉刃物
Line: OUKOKURYU MT
Made in: Echizen, Fukui - Japan
Profile: Gyuto/Chef
Edge Length: 216mm
Blade Height: 46mm
Edge Steel: SG2
Steel Type: Stainless
HRC: 62±
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Stabilized Poplar
Ferrule/Bolster Material: Stainless Steel
Spine Length: 222mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 130mm
Total Length: 355mm
Weight: 194g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Ashi Hamono 芦刃物製作所
Line: Ashi, Shirogami #2 (White #2)
Profile: Gyuto
Edge Length: 213mm
Blade Height: 49mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 212mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 120mm
Total Length: 334mm
Weight: 173g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori
Line: Seiun
Made in: Sakai - Japan
Smith: Satoshi Nakagawa 
Profile: Gyuto
Edge Length: 201mm
Blade Height: 48mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft stainless Damascus
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 215mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1mm
Handle Length: 128mm
Total Length: 342mm
Weight: 182g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Nigara 二唐刃物鍛造所
Line: VG Xeos
Made in: Hirosaki, Aomori - Japan
Smith: Nigara Hamono
Profile: Gyuto
Edge Length: 212mm
Blade Height: 49mm
Edge Steel: VG Xeos
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 226mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: .7mm
Handle Length: 235mm
Total Length: 360mm
Weight: 178mm
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: HG
Profile: Gyuto
Edge Length: 216mm
Blade Height: 46mm
Edge Steel: Undisclosed Stainless Steel
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Stainless Damascus
Finish: Damascus
Bevel: Double (Symmetrical)
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 226mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: .3mm
Handle Length: 145mm
Total Length: 370mm
Weight: 148g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Classic Range 
Profile: Gyuto
Edge Length: 222mm 
Blade Height: 55mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi, Nashiji, Damascus, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: English Walnut Handle
Ferrule/Bolster Material: Copper
Spine Length: 230mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 137mm
Total Length: 367mm 
Weight: 187g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Tsubo Yoshikane 津保吉金
Made in: Seki, Gifu - Japan
Line: Bread
Profile: Bread
Edge Length: 205mm
Blade Height: 41mm
Edge Steel: Undisclosed Stainless
Steel Type: Stainless
Construction: Zenko/Mono-Steel
Cladding: N/A
Finish: Migaki
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed Asymmetric
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Total Length: 325mm
Spine Length: 215mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 112.5mm
Weight: 138g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Edro

Made In: Cumberland, Maine, USA

Material: Poplar

Profile: Gyuto

Total Length: mm

Internal Length: mm 

Total Width: mm

Internal Width: mm

Total Thickness: mm

Internal Thickness: mm

Weight: g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Measurements are for the inside of the Saya, these measurements should be larger than your knives measurements.

Total Internal Length: 230mm

Height at Opening: 51.5mm

Width of Opening at Spine: 4.3mm

Width of Opening at Edge: 3.1mm

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Morihei 森平 
Made in: Tokyo - Japan
Line: Hisamoto Stainless Clad
Profile: Gyuto
Edge Length: 213mm
Blade Height: 50mm
Edge Steel: Shirogami #1/White #1
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Stainless
Finish: Tsuchime, Migaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western
Total Length: 340mm
Spine Length: 214mm
Thickness of Spine at Handle: 3mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 125mm
Weight: 220g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: FJ
Producing Area: Seki-Gifu/ Japan
Profile: Gyuto
Edge Steel: VG-10
Steel Type: Stainless
Cladding: N/A Mono-Steel
Bevel: Double
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle: Ho Wood & Buffalo Horn Ferrule Octagonal
Total Length: 358mm
Edge Length: 219mm
Spine Length: 225mm
Blade Height: 45mm
Thickness at Spine: 1.9mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 134mm
Weight: 111g
Saya: Sold Separately

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.