in stock

This knife is vintage and may include slight scratches, tarnish spots, etc. that it may have picked up over the decades. 

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Vintage Swedish Carbon
Profile: Gyuto
Edge Steel: K-121
Steel Type: Carbon
Cladding: N/A (Mono-steel blade)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Rosewood Western
Total Length: 398mm
Edge Length: 271mm
Spine Length: 273mm
Blade Height: 52mm
Thickness at Spine: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 120mm
Weight: 225g
Saya/Guard: Sold Separately 

Care Advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Makoto Kurosaki 
Line: VG7 Damascus 
Made in: Echizen, Fukui - Japan 
Sharpener: Makoto Kurosaki
Profile: Gyuto/Chef
Edge Length: 212mm 
Blade Height: 47mm 
Edge Steel: VG7
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: N/A
Spine Length: 225mm 
Thickness of Spine at Handle: 2mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 135mm 
Total Length: 360mm 
Weight: 165g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: Harima Forged
Made in: Miki, Hyogo - Japan 
Profile: Bunka
Edge Length: 176mm 
Blade Height: 45mm 
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Kurouchi (Forge Finish)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 190mm 
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 130mm 
Total Length: 320mm 
Weight: 145g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon with Stainless Clad
This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: lionSTEEL
Line: H2
Made In: Maniago - Italy
Style: Fixed
Profile: Karambit
Grind: Flat w/ Edge Bevel
Blade Steel: M390
Steel Type: Stainless
Blade Length: 77mm
Blade Height: 28.5mm
Blade Thickness: 3.6mm
Blade Construction: Mono-Steel
Handle/Tang Construction: SOLID Handle
Bolster/Hilt: Spine Jimping
Pommel: Finger Hole
Handle Material: Natural Micarta
Handle Color: Natural Micarta
Blade Finish/Color: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 84.5mm
Total Length: 187mm
Weight: 108g
Sheath/Clip: Kydex Belt Sheath
Lanyard Hole: N/A

Brand: lionSTEEL
Line: H2
Made In: Maniago - Italy
Style: Fixed
Profile: Karambit
Grind: Flat w/ Edge Bevel
Blade Steel: M390
Steel Type: Stainless
Blade Length: 77mm
Blade Height: 28.5mm
Blade Thickness: 3.6mm
Blade Construction: Mono-Steel
Handle/Tang Construction: SOLID Handle
Bolster/Hilt: Spine Jimping
Pommel: Finger Hole
Handle Material: Green Micarta
Handle Color: Green
Blade Finish/Color: Satin/Brushed 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 84.5mm
Total Length: 187mm
Weight: 108g
Sheath/Clip: Kydex Belt Sheath
Lanyard Hole: N/A

Brand: lionSTEEL
Line: TM1
Made In: Maniago - Italy
Style: Folding
Blade Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: Sleipner
Steel Type: Carbon
Blade Length: 84mm
Blade Height: 34.7mm
Blade Construction: Mono-Steel
Frame Construction: SOLID Micarta
Opening Mechanism: Thumb Stud
Locking Mechanism: Back Lock
Washers/Pivot System: IKBS Ball Bearings
Pommel: Tungsten Carbide Glass Breaker
Spacer/Spring: AISI 420 Stainless
Handle/Scale Material: Micarta
Handle/Scale Color: Black
Blade Finish/Color: Mil Spec
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 116mm
Total Length Open: 207mm
Total Length Closed: 120mm
Spine Thickness: 4.3mm
Weight: 144g
Sheath/Clip: Reversible Stainless Pocket Clip
Lanyard Hole: Yes

Brand: lionSTEEL
Line: TM1
Made In: Maniago - Italy
Style: Folding
Blade Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: Sleipner
Steel Type: Carbon
Blade Length: 84mm
Blade Height: 34.7mm
Blade Construction: Mono-Steel
Frame Construction: SOLID Micarta
Opening Mechanism: Thumb Stud
Locking Mechanism: Back Lock
Washers/Pivot System: IKBS Ball Bearings
Pommel: Tungsten Carbide Glass Breaker
Spacer/Spring: AISI 420 Stainless
Handle/Scale Material: Micarta
Handle/Scale Color: Black
Blade Finish/Color: Mil Spec
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 116mm
Total Length Open: 207mm
Total Length Closed: 120mm
Spine Thickness: 4.3mm
Weight: 144g
Sheath/Clip: Leather Case/Reversible Stainless Pocket Clip
Lanyard Hole: Yes

Brand: lionSTEEL
Line: SR11A
Made In: Maniago - Italy
Style: Folding
Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: Sleipner
Steel Type: Carbon
Blade Length: 90mm
Blade Height: 32mm
Blade Construction: Mono-Steel
Frame Construction: SOLID Aluminum
Opening Mechanism: Flipper
Locking Mechanism: Frame Lock
Washers/Pivot System: IKBS Ball Bearings
Spacer/Spring: N/A
Handle/Scale Material: Aluminum
Handle Color: Black
Blade Finish/Color: Black Mil Spec
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Right-Handed Lock
Handle Length: 120mm
Total Length Open: 215mm
Total Length Closed: 120mm
Spine Thickness: 4.3mm
Weight: 149g
Sheath/Clip: Reversible Pocket Clip w/ Glass Breaker
Lanyard Hole: Yes

Brand: lionSTEEL
Made In: Maniago - Italy
Line: Skinny
Style: Folding
Blade Profile: Drop Point
Grind: V Flat w/ Edge Bevel
Blade Steel: MagnaCut
Steel Type: Stainless
Blade Length: 85mm
Blade Height: 21mm
Blade Thickness: 3.5mm
Blade Construction: Mono-Steel
Frame Construction: SOLID
Opening Mechanism: Flipper
Locking Mechanism: Monolithic Frame Lock
Washers/Pivot System: IKBS Ball Bearings
Bolster: N/A
Pommel: N/A
Spacer/Spring: N/A
Handle/Scale Material: Aluminum w/ Canvas Micarta Inlay
Handle/Scale Color: Black
Blade Finish/Color: Stonewashed Black
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Right-Handed Lock
Handle Length: 113mm
Total Length Open: 200mm
Total Length Closed: 115mm
Total Thickness: 12mm
Weight: 71g
Sheath/Clip: Reversible Pocket Clip
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: lionSTEEL
Line: MYTO
Made In: Maniago - Italy
Style: Folding
Blade Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: M390
Steel Type: Stainless
Blade Length: 85mm
Blade Height: 29mm
Blade Construction: Mono-Steel
Frame Construction: Aluminum
Opening Mechanism: Removable Flipper
Locking Mechanism: Frame Lock
Washers/Pivot System: IKBS Ball Bearings
Pommel: Tungsten Carbide Glass Breaker
Spacer/Spring:  6Al4V Titanium
Handle/Scale Material: Natural Canvas and Titanium
Handle/Scale Color: Brown/Silver
Blade Finish/Color: Satin
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 115m
Total Length Open: 198mm
Total Length Closed: 115mm
Spine Thickness: 3.9mm
Weight: 96g
Sheath/Clip: Reversible  6Al4V Titanium Clip
Lanyard Hole: Yes

Brand: lionSTEEL
Line: H2
Made In: Maniago - Italy
Style: Fixed
Profile: Karambit
Grind: Flat w/ Edge Bevel
Blade Steel: M390
Steel Type: Stainless
Blade Length: 77mm
Blade Height: 28.5mm
Blade Thickness: 3.6mm
Blade Construction: Mono-Steel
Handle/Tang Construction: SOLID Handle
Bolster/Hilt: Spine Jimping
Pommel: Finger Hole
Handle Material: G10
Handle Color: Black
Blade Finish/Color: Black Stonewashed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 84.5mm
Total Length: 187mm
Weight: 108g
Sheath/Clip: Kydex Belt Sheath
Lanyard Hole: N/A

Brand: Hitohira ひとひら (一片)
Line: Futana
Made in: Tosa, Kochi - Japan 
Profile: Gyuto/Chef
Edge Length: 217mm 
Blade Height: 46mm 
Edge Steel: Alleima 19C27
Steel Type: Stainless
HRC: 60±1
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji (Textured), Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 230mm 
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 145mm
Total Length: 376mm
Weight: 142g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: Imojiya TH 
Made in: Seki, Gifu - Japan 
Profile: Sujihiki/Slicer
Edge Length: 226mm 
Blade Height: 38mm 
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: Pakka
Spine Length:  248mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 140mm 
Total Length: 386mm
Weight: 150g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: MOKI モキナイフ 
Made In:  Seki, Gifu - Japan 
Line: Kingfisher
Style: Folding
Blade Profile: Clip Point
Grind: Flat
Blade Steel: VG10W
Steel Type: Stainless
Edge Length: 70mm
Blade Height: 20mm
Blade Thickness: 2.6mm 
Blade Construction: Zenko (Mono-steel)
Frame Construction:  Scaled
Opening Mechanism: Thumb Stud
Locking Mechanism: Lock Back
Washers/Pivot System: Washers
Bolster: Stainless Steel
Pommel: N/A
Spacer/Spring: Stainless  
Handle/Scale Material: Linen Micarta
Handle/Scale Color: Black
Blade Finish/Color: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Length: 99mm
Total Length Open: 173mm 
Total Length Closed: 100mm 
Total Thickness: 10.6mm
Weight: 105g
Sheath/Clip: Leather Belt Sheath
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Florentine
Made in: Barcelona - Spain
Profile: Petty/Utility
Edge Length: 158mm
Blade Height: 40mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 162mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 110mm
Total Length: 276mm
Weight: 123g
Saya/Guard: Sold separately, available here

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Petty/Utility
Edge Length: 158mm
Blade Height: 40mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 162mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 110mm
Total Length: 276mm
Weight: 123g
Saya/Guard: Sold separately, available here

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Petty/Utility
Edge Length: 158mm
Blade Height: 40mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 162mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 110mm
Total Length: 276mm
Weight: 123g
Saya/Guard: Sold separately, available here

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Utility/Chef
Edge Length: 201mm
Blade Height: 45mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 210mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 110mm
Total Length: 323mm
Weight: 143g
Saya/Guard: Sold separately, available here

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Utility/Chef
Edge Length: 201mm
Blade Height: 45mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 210mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 110mm
Total Length: 323mm
Weight: 143g
Saya/Guard: Sold separately, available here

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Utility/Chef
Edge Length: 201mm
Blade Height: 45mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 210mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 110mm
Total Length: 323mm
Weight: 143g
Saya/Guard: Sold separately, available here

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Northeast Axe & Tool
Smith: Gabriel McNeill
Line: Carpenters Axe
Made In: Portland, Maine, USA
Edge Steel: 1055
Steel Type: Carbon
Finish: Kurouchi (forge finish)
Handle Material: Hickory w/ Walnut Wedge
Handle Length: 15" overall length
Cutting Edge: 2.75"
Head Weight: 12oz
Cover/Sheath: Yes, Leather Cover

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.