in stock

Brand: K Sabatier
Line: Antique
Made in: Thiers - France
Profile: Carving/Slicer
Edge Length: 170mm
Blade Height: 30mm
Edge Steel: Unclassified Vintage
Steel Type: Stainless
HRC: 55-57
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Wood (Unclassified)
Ferrule/Bolster Material: N/A
Spine Length: 170mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 110mm
Total Length: 280mm
Weight: 94g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら 
Made in: Echizen-Fukui, Japan
Line: NM
Profile: Santoku/Home Chef
Edge Length: 169mm
Blade Height: 47mm 
Edge Steel: VG-1
Steel Type: Stainless
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Tsuchime (Hammered)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal 
Handle Material: Enju
Ferrule/Bolster Material: N/A
Spine Length: 181mm
Thickness of Spine at Handle: 1.4mm
Thickness ½ way: 1.2mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 128mm
Total Length: 308mm
Weight: 110g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Ashi Hamono 芦刃物製作所
Line: Ashi, Shirogami #2 (White #2)
Profile: Santoku/Home Chef
Edge Length: 170mm 
Blade Height: 44.4mm 
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 173mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 120mm
Total Length: 292mm
Weight: 145g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Tosa-Kochi, Japan
Profile: Deba 
Edge Length: 166mm
Blade Height: 50mm
Edge Steel: Ginsan (Silver #3)
Steel Type: Stainless
Construction: Awase (Clad), Ni Mai
Cladding: Soft Stainless
Finish: Migaki (Standard)
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed 
Handle Shape: Octagonal
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 182mm
Thickness of Spine at Handle: 7.3mm
Thickness ½ way: 5.4mm
Thickness ~1cm from Tip: 3.2mm
Handle Length: 128mm
Total Length: 310mm
Weight: 267g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Tosa-Kochi, Japan
Profile: Deba 
Edge Length: 180mm
Blade Height: 53mm
Edge Steel: Ginsan (Silver #3)
Steel Type: Stainless
Construction: Awase (Clad), Ni Mai
Cladding: Soft Stainless
Finish: Migaki (Standard)
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed 
Handle Shape: Octagonal 
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 203mm
Thickness of Spine at Handle: 6.7m
Thickness ½ way: 4.7mm
Thickness ~1cm from Tip: 2.4mm
Handle Length: 130mm
Total Length: 332mm
Weight: 288g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Made in: Tosa-Kochi/ Japan
Line: Blue #1
Profile: Santoku
Edge Length: 166mm
Blade Height: 48mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Awase (Clad), San Mai
Cladding: Soft Iron
Finish: Kurouchi (Forge Finish)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster Material:
Spine Length: 178mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 128mm
Total Length: 305mm
Weight: 127g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら 
Made in: Seki-Gifu, Japan
Line: KH MV
Profile: Nakiri/Vegetable
Edge Length: 183mm 
Blade Height: 48mm 
Edge Steel: Molybdenum Vanadium 
Steel Type: Stainless
Construction: Mono-steel
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 
Hand Orientation: Right-Handed 
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 190mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 116mm 
Total Length: 306mm 
Weight: 187g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Tetsujin 鉄人刃物
Made in: Kochi, Japan
Smith: Toru Tamura 田村 徹
Sharpener: Naohito Myojin
Profile: Santoku/Home Chef
Edge Length: 176mm
Blade Height: 49mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Kasumi (Mist)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Taihei Rosewood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 185mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 130mm
Total Length: 318mm
Weight: 145g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Echizen-Fukui, Japan
Line: STK
Profile: Santoku/Home Chef
Edge Length: 174mm
Blade Height: 53mm
Edge Steel: VG-7
Steel Type: Stainless
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Tsuchime (Hammered), Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: N/A
Spine Length: 182mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 133mm
Total Length: 310mm
Weight: 131g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Line: S3 Nashiji
Profile: Santoku
Edge Length: 168mm
Blade Height: 45mm
Edge Steel: Ginsan (Silver #3)
Steel Type: Stainless
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Spine Length: 167mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1mm
Handle Length: 117mm
Total Length: 287mm
Weight: 124g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Zay Knives
Made in: Lewiston, Maine - USA
Smith: Isaiah Washington
Sharpener: Isaiah Washington
Profile: Nakiri
Edge Length: 160mm
Blade Height: 65mm
Edge Steel: 1084
Steel Type: Carbon
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Ebony
Ferrule/Bolster Material: Curly Maple & Copper
Spine Length: 177mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 2.1mm
Handle Length: 125mm
Total Length: 305mm
Weight: 249g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Nigara 二唐刃物鍛造所
Line: SPG STRIX
Made in: Aomori - Japan
Profile: Santoku
Edge Length: 168mm
Blade Height: 51mm
Edge Steel: SPG STRIX
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft Stainless
Finish: Tsuchime Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 182mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: .7mm
Handle Length: 130mm
Total Length: 310mm
Weight: 158g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Nigara 二唐刃物鍛造所
Line: VG Xeos
Made in: Hirosaki, Aomori - Japan
Smith: Nigara Hamono 
Profile: Santoku
Edge Length: 173mm
Blade Height: 50.5mm
Edge Steel: VG Xeos
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 188mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: .8mm
Handle Length: 130mm
Total Length: 317mm
Weight: 158g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: HADO
Line: Shiosai
Made in: Sakai, Osaka - Japan
Sharpener: Tadataka Maruyama
Profile: Bunka
Edge Length: 171mm
Blade Height: 50mm
Edge Steel: SG2
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Oak
Ferrule/Bolster Material: N/A
Spine Length: 188mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: .6mm
Handle Length: 135mm
Total Length: 320mm
Weight: 140mm
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Kikuzuki Rin
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka  田中
Sharpener: Ajioka-san 味岡
Profile: Santoku
Edge Length: 162mm
Blade Height: 41mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 
Thickness of Spine at Handle: 3.9mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 127mm
Total Length: 315mm
Weight: 143g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira

Made in: Sanjo, Niigata - Japan
Profile: Nakiri
Edge Length: 160mm
Blade Height: 51mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: D-Shape
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 180mm
Thickness of Spine at Handle: 4.8mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 1124mm
Total Length: 305mm
Weight: 146mm
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: Imojiya TH
Made in: Seki, Gifu - Japan
Profile: Santoku
Edge Length: 181mm
Blade Height: 47mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A (Mono-Steel)
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: Pakka
Spine Length: 190mmm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: .5mm
Handle Length: 140mm
Total Length: 330mm
Weight: 142g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: HG
Made in: Seki-Gifu, Japan
Profile: Nakiri
Edge Length: 158mm
Blade Height: 45.5mm
Edge Steel: Unclassified
Steel Type: Stainless Steel
Construction: Awase(clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso), Tsuchime (Hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 177mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 2mm
Handle Length: 135mm
Total Length: 305mm
Weight: 148g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: HG
Made in: Seki, Gifu - Japan
Profile: Santoku
Edge Length: 185mm
Blade Height: 45.4mm
Edge Steel: Undisclosed Stainless Steel
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Stainless Damascus
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry
Ferrule/Bolster Material: Ebony
Spine Length: 195mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: .9mm
Handle Length: 135mm
Total Length: 330mm
Weight: 110g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Line: Kuma Blue #2
Made in: Seki-Gifu, Japan
Profile: Gyuto/Chef
Edge Length: 181mm
Blade Height: 41mm
Edge Steel: Aogami #2 (Blue #2)
HRC: 59±1HRC 
Steel Type: Carbon
Construction: Awase (clad)
Cladding: Soft Stainless 
Finish: Tsuchime (hammered)
Bevel: Double
Bevel Symmetry: Symmetrical
Hand Orientation: Ambidextrous 
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 184mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 115mm
Total Length: 302mm
Weight: 139g
Saya/Guard: Sold Separately

Brand: Hitohira ひとひら
Line: KH MV
Made in: Seki, Gifu - Japan
Profile: Deba
Edge Length: 184mm
Blade Height: 48mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 183mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 3.5mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 115mm
Total Length: 302mm
Weight: 238g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.