in stock

Brand: Kepler Customs
Made in: Portland, Maine
Smith: Jordan Kepler
Profile: Petty/Utility
Edge Length: 115mm
Blade Height: 34mm
Edge Steel: 80CrV2
Steel Type: Carbon
Construction: Zenko (mono-steel)
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Rosewood
Spine Length: 130mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 140mm
Total Length: 270mm
Weight: 100g
Saya/Guard: Not Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: HADO
Line: Kirisame
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka 田中
Sharpener: HADO
Profile: Ko Bunka
Edge Length: 128mm
Blade Height: 47mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji (Textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Scorched Oak
Ferrule/Bolster Material: N/A
Spine Length: 144mm
Thickness of Spine at Handle: 3.2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 135mm
Total Length: 271mm
Weight: 122g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon with Stainless Cladding
This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: HADO
Line: Kirisame
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka 田中
Sharpener: HADO
Profile: Petty/Utility
Edge Length: 143mm
Blade Height: 29mm
Edge Steel: Shirogami #1 (White #1)
Steel Type: Carbon
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Nashiji (Textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Scorched Oak
Ferrule/Bolster Material: N/A
Spine Length: 150mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 120mm
Total Length: 270mm
Weight: 87g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon with Stainless Cladding
This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: NM
Made in: Echizen, Fukui - Japan 
Profile: Santoku/Home Chef
Edge Length: 131mm 
Blade Height: 37mm 
Edge Steel: VG-1
Steel Type: Stainless
HRC: 61±1
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Tsuchime (Hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 137mm 
Thickness of Spine at Handle: 
Thickness ½ way: 
Thickness ~1cm from Tip: 
Handle Length: 107mm 
Total Length: 245mm 
Weight: 102g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Sakai Kikumori 堺菊守 
Line: Signed Super Blue
Made in: Osaka, Sakai — Japan
Smith: Tanaka  田中
Profile: Petty/Utility
Edge Length: 141mm
Blade Height: 29mm
Edge Steel: Aogami Super (Super Blue)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: All Mirror (Kyomen)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 151mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 125mm
Total Length: 276mm
Weight: 92g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Ryusen Hamono  株式会社 龍泉刃物
Line: FUKAKURYU KAI
Made in: Echizen, Fukui - Japan
Profile: Kiritsuke Petty/Utility
Edge Length: 136mm
Blade Height: 27mm
Edge Steel: ATS-314
Steel Type: Stainless
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Birch Wood
Ferrule/Bolster Material: Birch Wood
Spine Length: 148mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 120mm
Total Length: 261mm
Weight: 75g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

 Brand: Ryusen Hamono  株式会社 龍泉刃物
Line: OUKOKURYU MT
Made in: Echizen, Fukui - Japan
Profile: Petty/Utility
Edge Length: 136mm
Blade Height: 27mm
Edge Steel: SG2
Steel Type: Stainless
HRC: 62±
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Stabilized Poplar
Ferrule/Bolster Material: Stainless Steel
Spine Length: 144mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 109mm
Total Length: 255mm
Weight: 74g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Petty/Utility
Edge Length: 158mm
Blade Height: 40mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 162mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 110mm
Total Length: 276mm
Weight: 123g
Saya/Guard: Sold separately, available here

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Petty/Utility
Edge Length: 158mm
Blade Height: 40mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 162mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 110mm
Total Length: 276mm
Weight: 123g
Saya/Guard: Sold separately, available here

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Petty/Utility
Edge Length: 158mm
Blade Height: 40mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 162mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 110mm
Total Length: 276mm
Weight: 123g
Saya/Guard: Sold separately, available here

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Petty/Utility
Edge Length: 158mm
Blade Height: 40mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 162mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 110mm
Total Length: 276mm
Weight: 123g
Saya/Guard: Sold separately, available here

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: HADO
Smith: Yoshikazu Tanaka  田中
Sharpener: Tadataka Maruyama
Made in: Sakai, Osaka - Japan
Line: Sumi Blue #1
Profile: Petty/Utility
Edge Length: 145mm
Blade Height: 30mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Awase (Clad), San-Mai
Cladding: Soft Iron
Finish: Kurouchi (Forge Finish), Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Brown Lacquered Oak Handle with Cherry Bark (2 Sides)
Total Length: 273mm
Spine Length: 154mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 118mm
Weight: 92g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: Carbon
This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Zay Knives
Line: Coreless Damascus 
Made in:  Lewiston, Maine - USA 
Smith: Isaiah Washington 
Sharpener: Isaiah Washington 
Profile: Petty/Utility
Edge Length: 130mm
Blade Height: 45mm
Edge Steel: 1095-15N20
Steel Type: Carbon
Construction: Coreless Damascus
Cladding: N/A
Finish: Mosiac Integral Damascus (Sekiso)
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Stabilized Black Palm Wood
Ferrule/Bolster Material: Copper
Spine Length: 136mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 100mm
Total Length: 255mm
Weight: 150g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel 
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: K Sabatier
Line: Old Butcher
Made in: Thiers - France
Profile: Butcher
Edge Length: 138mm
Blade Height: 30mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Spine Length: 140mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 2.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 125mm
Total Length: 268mm
Weight: 95g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: K Sabatier
Line: Auvergne
Made in: Thiers - France
Profile: Petty/Utility
Edge Length: 160mm
Blade Height: 24mm
Edge Steel: Z50C13
Steel Type: Stainless
HRC: 55-57
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Coral Wood
Ferrule/Bolster Material: Stainless Steel
Spine Length: 160mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 112mm
Total Length: 272mm
Weight: 110g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Windmühlenmesser
Made In: Solingen - Germany
Line: Ibex
Style: Folding
Blade Profile: Modified Sheepsfoot 
Grind: Flat
Blade Steel: X50CrMoV15
Steel Type: Stainless
HRC: 57 
Blade Length: 100mm
Blade Height: 23mm 
Blade Thickness: 2.0mm
Blade Construction: Mono-Steel
Frame Construction: Unibody
Opening Mechanism: Nail Nick 
Locking Mechanism: Ratcheting Back Lock
Washers/Pivot System: N/A
Bolster: N/A
Pommel: N/A
Spacer/Spring: N/A
Handle/Scale Material: Plum Wood
Handle/Scale Color: Natural Wood
Blade Finish/Color:  Satin
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Length: 140mm
Total Length Open: 245mm
Total Length Closed: 140mm
Total Thickness: 15mm
Weight: 62g
Sheath/Clip: Keychain Ring
Lanyard Hole: N/A

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Windmühlenmesser
Made In: Solingen - Germany
Line: Ibex
Style: Folding
Blade Profile: Modified Sheepsfoot 
Grind: Flat
Blade Steel: X50CrMoV15 (Stainless chrome-molybdenum-vanadium)
Steel Type: Stainless
HRC: 57 
Blade Length: 100mm
Blade Height: 23mm 
Blade Thickness: 2.0mm
Blade Construction: Zenko (Mono-steel)
Frame Construction: Unibody
Opening Mechanism: Nail Nick 
Locking Mechanism: Lever Action Back Lock
Washers/Pivot System: N/A
Bolster: N/A
Pommel: N/A
Spacer/Spring: N/A
Handle/Scale Material: Olive Wood
Handle/Scale Color: Light brown
Blade Finish/Color:  Migaki (Standard)
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Length: 140mm
Total Length Open: 245mm
Total Length Closed: 140mm
Total Thickness: 15mm
Weight: 68g
Sheath/Clip: Keychain ring
Lanyard Hole: N/A

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Windmühlenmesser
Line: Buckel Fehrekampf 
Made In: Solingen - Germany
Profile: Buckel/Utility
Edge Length: 115mm
Blade Height: 20mm
Steel: Proprietary Stainless
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Fine Glazed
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle: Walnut
Total Length: 220mm
Spine Length: 115mm
Thickness at Spine: 1.3mm
Thickness ½ way: 1.3mm
Thickness ~1 cm from Tip: 1.3mm
Handle Length: 105mm
Weight: 48g
Saya/Guard: Comes with leather sheath and gift box

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Windmühlenmesser
Line: Buckel
Made In: Solingen - Germany
Profile: Buckel/Utility
Edge Length: 115mm
Blade Height: 20mm
Steel: Proprietary Stainless
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Fine Glazed
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle: Walnut
Total Length: 220mm
Spine Length: 115mm
Thickness at Spine: 1.3mm
Thickness ½ way: 1.3mm
Thickness ~1 cm from Tip: 1.3mm
Handle Length: 105mm
Weight: 38g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: SK
Profile: Butchery
Edge Length: 150mm
Blade Height: 29mm
Edge Steel: SK
Steel Type: Carbon
Construction: Mono-steel
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 10:90
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Spine Length: 156mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 107mm
Total Length: 262mm
Weight: 94g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: MOKI モキナイフ 
Made In:  Seki-Gifu, Japan
Line: Berg
Style: Fixed Blade
Profile: Drop Point
Grind: Convex
Blade Steel: VG10W  
Steel Type: Stainless
Blade Length: 153mm
Blade Height: 35mm
Blade Thickness: 4.7mm
Blade Construction: Awase (clad), San Mai
Handle/Tang Construction: Full Tang
Bolster: N/A
Pommel: N/A
Handle Material: Linen Micarta
Handle Color: Black
Blade Finish/Color: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Length: 130mm
Total Length: 285mm 
Weight: 294g
Sheath/Clip: Leather sheath included 
Lanyard Hole: Yes