Hitohira - YG - Nashiji - White #2 - Santoku 165mm - Walnut Handle (Ziricote Ferrule)
Hitohira - YG - Nashiji - White #2 - Santoku 165mm - Walnut Handle (Ziricote Ferrule)
Hitohira - YG - Nashiji - White #2 - Santoku 165mm - Walnut Handle (Ziricote Ferrule)
Hitohira - YG - Nashiji - White #2 - Santoku 165mm - Walnut Handle (Ziricote Ferrule)
Hitohira - YG - Nashiji - White #2 - Santoku 165mm - Walnut Handle (Ziricote Ferrule)
Hitohira - YG - Nashiji - White #2 - Santoku 165mm - Walnut Handle (Ziricote Ferrule)
Hitohira - YG - Nashiji - White #2 - Santoku 165mm - Walnut Handle (Ziricote Ferrule)
Hitohira - YG - Nashiji - White #2 - Santoku 165mm - Walnut Handle (Ziricote Ferrule)
Hitohira - YG - Nashiji - White #2 - Santoku 165mm - Walnut Handle (Ziricote Ferrule)

Hitohira - YG - Nashiji - White #2 - Santoku 165mm - Walnut Handle (Ziricote Ferrule)

AAA-455-02-CA165

Regular price $250.00 Save $-250.00
3 in stock

Brand: Hitohira ひとひら
Made in: Echizen-Fukui, Japan
Line: YG
Profile: Santoku/Home Chef
Edge Length: 168mm
Blade Height: 50mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (clad)
Cladding: Soft Iron
Finish: Nashiji (textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Ziricote
Spine Length: 182mm
Thickness of Spine at Handle: 5.3mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 128mm
Total Length: 310mm
Weight: 138g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.