Sujihiki/Slicer

Brand: Hitohira ひとひら (一片)
Made in: Seki, Gifu - Japan
Line: Imojiya KT
Profile: Sujihiki 
Edge Length: 210mm
Blade Height: 34.5mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase/Clad
Cladding: Soft Stainless
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Linen Micarta Western
Total Length: 340mm
Spine Length: 215mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 125mm
Weight: 205g
Saya/Guard: Purchased Separately

Brand: Hitohira
Line: Vintage SK
Profile: Sujihiki
Edge Length: 305mm
Edge Steel: Mono SK High Carbon
Steel Type: Carbon
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Ebony Pakka Western Handle
Total Length: 432mm
Spine Length: 309mm
Handle Length: 122mm
Blade Height: 44mm
Thickness of Spine at Handle: 2.7mm
Thickness of Spine Half Way: 2.3mm
Thickness of Spine ~1cm from Tip: 0.8mm
Weight: 216g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

This knife is vintage and may include slight scratches, tarnish spots, etc. that it may have picked up over the decades

Brand:  
Made in: 
Smith:  
Sharpener:
Line: 
Profile: 
Edge Length: 199mm
Blade Height: 26mmn
Edge Steel:  
Steel Type:  
Construction:  
Cladding: 
Finish:  
Bevel:  
Bevel Symmetry: 
Hand Orientation:  
Handle Shape: 
Handle Material: 
Ferrule/Bolster Material: 
Total Length: 312mm
Spine Length: 196mm
Thickness of Spine at Handle: 2.7mmn
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 107mm
Weight: 125g
Saya/Guard: 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand:  
Made in: 
Smith:  
Sharpener:
Line: 
Profile: 
Edge Length: 257mm
Blade Height: 29mm
Edge Steel:  
Steel Type:  
Construction:  
Cladding: 
Finish:  
Bevel:  
Bevel Symmetry: 
Hand Orientation:  
Handle Shape: 
Handle Material: 
Ferrule/Bolster Material: 
Total Length: 380mm
Spine Length: 257mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.1mm
Handle Length: 122mm
Weight: 172g
Saya/Guard:

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand:  
Made in: 
Smith:  
Sharpener:
Line: 
Profile: 
Edge Length: 204mm
Blade Height: 30mm
Edge Steel:  
Steel Type:  
Construction:  
Cladding: 
Finish:  
Bevel:  
Bevel Symmetry: 
Hand Orientation:  
Handle Shape: 
Handle Material: 
Ferrule/Bolster Material: 
Total Length: 328mm
Spine Length: 205mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 117mm
Weight: 165g
Saya/Guard:

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand:  
Made in: 
Smith:  
Sharpener:
Line: 
Profile: 
Edge Length: 300mm
Blade Height: 27mm
Edge Steel:  
Steel Type:  
Construction:  
Cladding: 
Finish:  
Bevel:  
Bevel Symmetry: 
Hand Orientation:  
Handle Shape: 
Handle Material: 
Ferrule/Bolster Material: 
Total Length: 430mm
Spine Length: 302mm
Thickness of Spine at Handle: 0.9mm
Thickness ½ way: 0.7mm
Thickness ~1cm from Tip: 0.2mm
Handle Length: 129mm
Weight: 118g
Saya/Guard: 

About these Antique Knives: These knives were manufactured by the Fifth or the Sixth generation of Sabatier makers around 1950 to 1960. Grinding was done by hand in the traditional method. 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Kanehide 兼秀
Made in: Seki, Gifu - Japan
Line: Bessaku Stainless
Profile: Sujihiki
Edge Length: 240mm
Blade Height: 37.7mm
Edge Steel: Unclassified Stainless
Steel Type: Stainless
Grind: Asymmetric Double Bevel
Construction: Mono-Steel
Cladding: N/A
Finish: Migaki/Standard
Bevel: Double
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Total Length: 350mm
Spine Length: 243mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 110mm
Weight: 137g

Saya/Guard: Sold Seperately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Morihei 森平 
Made in: Tokyo/ Japan 
Smith: N/A
Sharpener: Morihei 森平
Line: Hisamoto Hagane 
Profile: Sujihiki
Edge Length:. 245 mm
Blade Height:  43 mm
Edge Steel: Mono SK High Carbon
Steel Type: Carbon Steel 
Construction: Mono
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed 
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Total Length:  366 mm
Spine Length:  245 mm
Thickness of Spine at Handle:  1.9 mm
Thickness ½ way:  2.0 mm
Thickness ~1cm from Tip:  1.3 mm
Handle Length:  119 mm
Weight:  163 g
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.


Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Morihei 森平
Made in: Tokyo - Japan
Line: Hisamoto Hagane
Sharpener: Morihei 森平
Profile: Sujihiki
Edge Length: 
Blade Height: 40mm
Edge Steel: Mono SK High Carbon
Steel Type: Carbon Steel
Construction: Mono
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Total Length: 405mm
Spine Length: 279mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .8mm
Handle Length: 123mm
Weight: 197g

Brand: Morihei 森平
Made in: Tokyo - Japan
Smith: N/A
Sharpener: Morihei 森平
Line: Hisamoto Hagane
Profile: Sujihiki
Edge Length: 273mm
Blade Height: 40mm
Edge Steel: Mono SK High Carbon
Steel Type: Carbon Steel
Construction: Mono
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Total Length: 405mm
Spine Length: 279mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .8mm
Handle Length: 123mm
Weight: 197g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Morihei
Made in: Echizen, Japan
Line: Hisamoto Inox
Profile: Kiritsuke Sujihiki
Edge Length: 240mm
Blade Height: 35mm
Edge Steel:  SUS-440
Steel Type: Stainless
Grind: Convex
Construction: Mono-Steel
Cladding: N/A
Finish: Migaki/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Total Length: 360
Spine Length: 245mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 115mm
Weight: 164g
Saya/Guard: Purchased Separately 

Brand: Morihei 森平
Line: Hisamoto Inox
Profile: Kiritsuke Sujihiki
Edge Length: 270mm
Blade Height: 39.3mm
Edge Steel: SUS-440
Steel Type: Stainless
Grind: Flat
Construction: Mono-Steel
Cladding: N/A
Finish: Migaki/Standard
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Total Length: 390mm
Spine Length: 275mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 115mm
Weight: 176g
Saya/Guard: Purchased Separately 

Brand: Sakai Kikumori 堺菊守
Line: Nihonko 日本鋼
Profile: Sujihiki
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right Handed
Handle: Pakka Western
Total Length: 363mm
Edge Length: 240mm
Spine Length: 245mm
Blade Height: 35mm
Thickness at Spine: 2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1mm 
Handle Length: 115mm
Weight: 171g

 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Nihonko 日本鋼
Profile: Sujihiki
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrious
Handle: Pakka Western
Total Length: 430mm
Edge Length: 301mm
Spine Length: 305mm
Blade Height: 44mm
Thickness at Spine: 2.1mm
Thickness ~1cm from Tip: 1.9mm
Handle Length: 122mm
Weight: 217g

 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: VG5
Profile: Sujhihiki
Edge Length: 272mm
Blade Height: 40mm
Edge Steel: VG5
Steel Type: Stainless
Grind: Convex
Construction: Awase/Clad, San-Mai
Cladding: Soft Stainless
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Black Pakka
Ferrule/Bolster Material: Stainless Steel
Total Length: 402mm
Spine Length: 278mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 123mm
Weight: 220g
Saya/Guard: Purchased Separately

Brand: Windmühlenmesser
Made in: Solingen - Germany
Line: K6
Profile: Slicer
Edge Length: 227mm
Blade Height: 23.4mm
Edge Steel: Proprietary Stainless
Steel Type: Stainless
Grind: Convex
Construction: Mono-Steel
Cladding: N/A
Finish: Blue Glaze
Bevel: Double 
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Walnut
Ferrule/Bolster Material: N/A
Total Length: 350mm
Spine Length: 225mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 123mm
Weight: 96g
Saya/Guard: Sold Separately

Brand: Windmuhlenmesser
Profile: Fillet
Steel Type: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: POM
Total Length: 340mm
Edge Length: 215mm
Spine Length: 210mm
Blade Height: 20mm
Thickness at Spine: 2mm
Thickness ½ way: 2mm
Thickness ~1 cm from Tip: 1.2mm
Handle Length: 130mm
Weight: 162g

 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Windmühlenmesser
Made in: Solingen - Germany
Line: Yatagan
Profile: Slicer
Edge Length: 158mm
Blade Height: 16mm
Edge Steel: Proprietary Stainless
Steel Type: Stainless
Grind: Flat
Construction: Mono-Steel
Cladding: N/A
Finish: Blue Glazed
Bevel: Double
Bevel Symmetry: 505/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Plumwood
Ferrule/Bolster Material: N/A
Total Length: 273mm
Spine Length: 157mm
Thickness of Spine at Handle: 1.4mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 110mm
Weight: 57g
Saya/Guard: Sold Seperately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.