Sujihiki/Slicer

Brand: K Sabatier
Line: Antique
Made in: Thiers - France
Profile: Carving/Slicer
Edge Length: 170mm
Blade Height: 30mm
Edge Steel: Unclassified Vintage
Steel Type: Stainless
HRC: 55-57
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Wood (Unclassified)
Ferrule/Bolster Material: N/A
Spine Length: 170mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 110mm
Total Length: 280mm
Weight: 94g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Chef
Edge Length: 260mm
Blade Height: 49mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Coral Wood
Ferrule/Bolster Material: Stainless
Total Length: 391mm
Spine Length: 261mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 125mm
Weight: 275g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Slicer
Edge Length: 257mm
Blade Height: 29mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 380mm
Spine Length: 257mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.1mm
Handle Length: 122mm
Weight: 172g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Slicer
Edge Length: 204mm
Blade Height: 30mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 328mm
Spine Length: 205mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 117mm
Weight: 165g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.