Sujihiki/Slicer

Ajikataya - White #2 - Kurouchi Nashiji - 270mm Sujihiki - Magnolia Handle

$295.00

Brand: Ajikataya
Made in: Sanjo, Japan
Line: Nashiji
Profile: Sujihiki
Edge Length: 280mm
Blade Height: 44mm
Edge Steel: White #2 (Shirogami)
Steel Type: Carbon
Grind: Wide Bevel
Construction: Awase/Clad, San-Mai
Cladding: Soft Iron
Finish: Kurouchi Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia
Ferrule/Bolster Material: Buffalo Horn
Total Length: 440mm
Spine Length: 295mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 144mm
Weight: 182g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Ajikataya - White #2 - Kurouchi Nashiji - 270mm Sujihiki - Magnolia Handle

HADO - Ginsan Urushi Kijiro - 240mm Kiritsuke Sujihiki - Urushi Handle

$575.00

Brand: HADO
Smith: Shogou Yamatsuka
Sharpener: Tadataka Maruyama
Profile: Kiritsuke Sujihiki
Edge Steel: Ginsanko (Silver #3)
Steel Type: Stainless
Cladding: Stainless Cladding
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Mono Urushi Wa
Total Length: 385mm
Edge Length: 235mm
Spine Length: 245mm
Blade Height: 41mm
Thickness at Spine: 2.6mm
Thickness ½ way: 2mmm
Thickness ~1cm from Tip: 0.6
Handle Length: 140mm
Weight: 131g
Saya/Guard: N/A

HADO - Ginsan Urushi Kijiro - 240mm Kiritsuke Sujihiki - Urushi Handle

Hitohira - Futana - Ginsan - Migaki - 270mm Sujihiki - Cherry Handle

$225.00

Brand: Hitohira ひとひら (一片)
Line: Futana
Profile: Sujihiki
Edge Steel: Ginsanko
Steel Type: Stainless
Cladding: Stainless
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry Wood & Ebony Ferrule Octagonal
Total Length: 432mm
Edge Length: 272mm
Spine Length: 288mm
Blade Height: 38mm
Thickness of Spine at Handle: 2.3mm
Thickness of Spine Half Way: 1.8mm
Thickness of Spine ~1cm from Tip: 1.1mm
Handle Length: 145mm
Weight: 130g
Saya: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Futana - Ginsan - Migaki - 270mm Sujihiki - Cherry Handle

Hitohira - Futana - Ginsan - Nashiji - 240mm Sujihiki - Cherry Handle

$195.00

Brand: Hitohira ひとひら (一片)
Line: Futana
Profile: Sujihiki
Edge Steel: Ginsanko
Steel Type: Stainless
Cladding: Stainless
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry Octagonal
Total Length: 403mm
Edge Length: 245mm
Spine Length: 258mm
Blade Height: 35mm
Thickness of Spine at Handle: 2.3mm
Thickness of Spine Half Way: 2mm
Thickness of Spine ~1cm from Tip: 1.5mm
Handle Length: 144mm
Weight: 121g
Saya: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Futana - Ginsan - Nashiji - 240mm Sujihiki - Cherry Handle

Hitohira - Futana - S3 - Migaki - 240mm Sujihiki - Cherry Handle

$195.00

Brand: Hitohira ひとひら (一片)
Made In: Sakai, Osaka - Japan
Line: Futana
Profile: Sujihiki
Edge Steel: S3
Steel Type: Stainless
Cladding: Stainless
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry Octagonal
Total Length: 403mm
Edge Length: 242mm
Spine Length: 258mm
Blade Height: 35mm
Thickness of Spine at Handle: 2.1mm
Thickness of Spine Half Way: 1.9mm
Thickness of Spine ~1cm from Tip: 1.0mm
Handle Length: 145mm
Weight: 127g
Saya: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Futana - S3 - Migaki - 240mm Sujihiki - Cherry Handle

Hitohira - Futana - Super Blue - Migaki - 270mm Sujihiki - Cherry Handle

$240.00

Brand: Hitohira ひとひら (一片)
Made in: Echizen, Japan
Line: Super Blue Migaki
Profile: Sujihiki
Edge Length: 272mm
Blade Height: 32mm
Edge Steel: Super Blue
Steel Type: Carbon
Grind: Convex
Construction: Awase/Clad, San-Mai
Cladding: Stainless
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry
Ferrule/Bolster Material: Ebony
Total Length: 433mm
Spine Length: 281mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 145mm
Weight: 135g
Saya/Guard: Purchased Separatley

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Futana - Super Blue - Migaki - 270mm Sujihiki - Cherry Handle

Hitohira - Hinode - White #2 Nashiji - 270mm Sujihiki - Ho Wood Handle

$260.00

Brand: Hitohira
Line: Hinode
Profile: Sujihiki
Edge Steel: White #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Ho Wood Wa
Total Length: 425mm
Edge Length: 276mm
Spine Length: 292mm
Blade Height: 38mm
Thickness at Spine: 4.7mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 132mm
Weight: 159g
Saya/Guard: No

Hitohira - Hinode - White #2 Nashiji - 270mm Sujihiki - Ho Wood Handle

Hitohira - Imojiya KT - VG10 - 210mm Sujihiki - Micarta Handle

$175.00

Brand: Hitohira ひとひら (一片)
Made in: Seki, Gifu - Japan
Line: Imojiya KT
Profile: Sujihiki
Edge Length: 210mm
Blade Height: 34.5mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase/Clad
Cladding: Soft Stainless
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Linen Micarta Western
Total Length: 340mm
Spine Length: 215mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 125mm
Weight: 205g
Saya/Guard: Purchased Separately

Hitohira - Imojiya KT - VG10 - 210mm Sujihiki - Micarta Handle

Hitohira - Setsu Forged - VG10 Damascus - 255mm Sujihiki - Jutan Handle

$395.00

Brand: Hitohira ひとひら (一片)
Made in: Echizen-Fukui/ Japan
Line: Setsu Forged VG10 Damascus
Profile: Sujihiki
Edge Length: 259mm
Blade Height: 40mm
Edge Steel: VG10
Steel Type: Stainless
Grind: Convex
Construction: Awase/Clad
Cladding: Stainless
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Jutan Wood
Ferrule/Bolster Material: Black Pakka
Total Length: 410mm
Spine Length: 272mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 140mm
Weight: 149g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Setsu Forged - VG10 Damascus - 255mm Sujihiki - Jutan Handle

Hitohira - Setsu Forged - VG10 Damascus - 255mm Sujihiki - Rosewood Handle

$250.00

Brand: Hitohira ひとひら (一片)
Made in: Echizen-Fukui/ Japan
Line: Setsu Forged VG10 Damascus
Profile: Sujihiki
Edge Length: 258mm
Blade Height: 39mm
Edge Steel: VG10
Steel Type: Stainless
Grind: Convex
Construction: Awase/Clad
Cladding: Stainless
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: D-Shaped
Handle Material: Rosewood
Ferrule/Bolster Material: Black Pakka
Total Length: 410mm
Spine Length: 270mm
Thickness of Spine at Handle: 3mm
Thickness ½ way: 1mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 140mm
Weight: 135g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Setsu Forged - VG10 Damascus - 255mm Sujihiki - Rosewood Handle

Hitohira - Togashi - White #1 - Stainless Clad - Kasumi - 240mm Sujihiki - Ebony Handle

$450.00

Brand: Hitohira ひとひら (一片)
Blacksmith: Togashi 富樫
Line: Stainless Clad Kasumi
Profile: Sujihiki
Edge Length: 232mm
Edge Steel: White #1
Steel Type: Carbon
Cladding: Stainless Clad Kasumi
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Ebony
Total Length: 390mm
Spine Length: 245mm
Handle Length: 145mm
Blade Height: 38mm
Thickness of Spine at Handle: 2.7mm
Thickness of Spine Half Way: 2.5mm
Thickness of Spine ~1cm from Tip: 1.4mm
Weight: 175g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

This knife is vintage and may include slight scratches, tarnish spots, etc. that it may have picked up over the decades.

Hitohira - Togashi - White #1 - Stainless Clad - Kasumi - 240mm Sujihiki - Ebony Handle

Hitohira - Togashi - White #1 - Stainless Clad - Migaki - 240mm Sujihiki - Ziricote Handle

$460.00

Brand: Hitohira ひとひら (一片)
Made in: Sakai, Japan
Smith: Kenji Togashi 富樫
Line: White #1 Stainless Clad
Profile: Sujihiki
Edge Length: 229mm
Blade Height: 38mm
Edge Steel: White #1
Steel Type: Carbon
Grind: Wide Double Bevel
Construction: Awase/Clad, San-Mai
Cladding: Stainless
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ziricote
Ferrule/Bolster Material: Buffalo Horn
Total Length: 388mm
Spine Length: 243mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 145mm
Weight: 170g
Saya/Guard: Purchased Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Togashi - White #1 - Stainless Clad - Migaki - 240mm Sujihiki - Ziricote Handle

RYUSEN - BONTEN UNRYU WA - VG10 DAMASCUS - 240mm Kengata Sujihiki - Wenge Handle

$405.00

60HRC Hardness

Brand: Ryusen 株式会社龍泉刃物
Line: Botenunryu
Profile: Kengata Sujihiki
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric
Handle: Wenge Wa
Total Length: 380mm
Edge Length: 250mm
Spine Length: 254mm
Blade Height: 32mm
Thickness at Spine: 2.1mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 126mm
Weight: 119g

RYUSEN - BONTEN UNRYU WA - VG10 DAMASCUS - 240mm Kengata Sujihiki - Wenge Handle

Ryusen - TANGANRYU - VG10 - 240mm Sujihiki - Maple

$450.00

Brand: Ryusen 株式会社龍泉刃物
Line: Tangan RYU
Profile: Sujihiki
Edge Steel: VG10
Steel Type: Stainless
Cladding: Soft Stainless
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Maple Western
Total Length: 377mm
Edge Length: 235mm
Spine Length: 250mm
Blade Height: 37mm
Thickness at Spine: 2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 125mm
Weight: 167g
Saya: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Ryusen - TANGANRYU - VG10 - 240mm Sujihiki - Maple

RYUSEN - TANGANRYU - VG10 Tsuchime Damascus - 240mm Sujihiki - Black Micarta Hybrid Handle

$400.00

Brand: Ryusen 株式会社龍泉刃物
Line: Tangan Ryu
Profile: Sujihiki
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric
Handle: Black Micarta
Total Length: 380mm
Edge Length: 236mm
Spine Length: 250mm
Blade Height: 43mm
Thickness at Spine: 2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 125mm
Weight: 193g

RYUSEN - TANGANRYU - VG10 Tsuchime Damascus - 240mm Sujihiki - Black Micarta Hybrid Handle

RYUSEN - TANGANRYU - VG10 Tsuchime Damascus - 270mm Sujihiki - Black Micarta Hybrid Handle

$475.00

Brand: Ryusen 株式会社龍泉刃物
Line: Tangan Ryu
Profile: Sujihiki
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric
Handle: Black Micarta
Total Length: 418mm
Edge Length: 270mm
Spine Length: 290mm
Blade Height: 41mm
Thickness at Spine: 2.4mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 127mm
Weight: 247g

RYUSEN - TANGANRYU - VG10 Tsuchime Damascus - 270mm Sujihiki - Black Micarta Hybrid Handle

Sakai Kikumori - Gokujyo - White #2 - 240mm Sujihiki - Ho Wood Handle

$300.00

Brand: Sakai Kikumori 堺菊守
Line: Gokujyo 極上
Profile: Sujihiki
Edge Steel: White #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrious
Handle: Ho Wood Wa
Total Length: 378mm
Edge Length: 230mm
Spine Length: 243mm
Blade Height: 38mm
Thickness at Spine: 2.3mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 135mm
Weight: 131g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Sakai Kikumori - Gokujyo - White #2 - 240mm Sujihiki - Ho Wood Handle

Sakai Kikumori - Gokujyo - White #2 - 270mm Sujihiki - Ho Wood Handle

$350.00

Brand: Sakai Kikumori 堺菊守
Line: Gokujyo 極上
Profile: Sujihiki
Edge Steel: White #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrious
Handle: Ho Wood Wa
Total Length: 415mm
Edge Length: 262mm
Spine Length: 275mm
Blade Height: 42mm
Thickness at Spine: 2.8mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 140mm
Weight: 159g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Sakai Kikumori - Gokujyo - White #2 - 270mm Sujihiki - Ho Wood Handle

Sakai Kikumori - VG5 - 270mm Sujihiki - Western Black Pakka Handle

$240.00

Brand: Sakai Kikumori 堺菊守
Line: VG5
Profile: Sujhihiki
Edge Length: 272mm
Blade Height: 40mm
Edge Steel: VG5
Steel Type: Stainless
Grind: Convex
Construction: Awase/Clad, San-Mai
Cladding: Soft Stainless
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Black Pakka
Ferrule/Bolster Material: Stainless Steel
Total Length: 402mm
Spine Length: 278mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 123mm
Weight: 220g
Saya/Guard: Purchased Separately