Stainless

Hitohira - Fish Scaler - Brass - Small

aafya-010

$10.00

Total Length: 175mm

Head Length: 45mm

Head Width: 25mm

Weight: 74g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - HG - Tsuchime Damascus - 160mm Nakiri - Western Handle

DAA-190-09-DA

$95.00

Brand: Hitohira ひとひら (一片)
Line: HG Tsuchime Damascus
Profile: Nakiri
Steel Type: Unclassified Stainless
Cladding: Stainless Tsuchime Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Imitation Mahogany, Western
Total Length: 288mm
Edge Length: 160mm
Spine Length: 170mm
Handle Length: 117mm
Blade Height: 45mm
Thickness of Spine at Handle: 1.8mm
Thickness of Spine Half Way: 1.5mm
Thickness of Spine ~1cm from Tip: 1.5mm
Weight: 187g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - HG - Tsuchime Damascus - 160mm Nakiri - Western Handle

Hitohira - HG - Tsuchime Damascus - 185mm Santoku - Western Handle

DAA-190-09-CA

$95.00

Brand: Hitohira ひとひら (一片)
Line: HG Tsuchime Damascus
Profile: Santoku
Steel Type: Unclassified Stainless
Cladding: Stainless Tsuchime Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Imitation Mahogany, Western
Total Length: 307mm
Edge Length: 185mm
Spine Length: 184mm
Handle Length: 128mm
Blade Height: 45mm
Thickness of Spine at Handle: 1.6mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.2mm
Weight: 177g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - HG - Tsuchime Damascus - 185mm Santoku - Western Handle

Hitohira - Hiragana - 120mm Deba - Pakka Handle - No Bolster

AAA-279-01-NA120

$60.00

Brand: Hitohira ひとひら (一片)
Made In: Seki-Gifu, Japan
Line: Hiragana
Profile: Deba
Edge Length: 111mm
Blade Height: 43mm
Edge Steel: AUS-8
Steel Type: Stainless
Cladding: N/A
Bevel: Single
Bevel Symmetry: 100/0
Hand Orientation: Right Handed
Handle: Western Pakka
Total Length: 225mm
Spine Length: 120mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 3.7mm
Thickness ~1cm from Tip: 3.1mm
Handle Length: 107mm
Weight: 169g
Saya/Guard: Purchased Separately

Hitohira - Hiragana - 120mm Deba - Pakka Handle - No Bolster

Hitohira - Hiragana - 150mm Deba - Pakka Handle - No Bolster

AAA-279-01-NA150

$70.00

Brand: Hitohira ひとひら (一片)
Made In: Seki-Gifu, Japan
Line: Hiragana
Profile: Deba
Edge Length: 150mm
Blade Height: 55mm
Edge Steel: AUS-8
Steel Type: Stainless
Cladding: N/A
Bevel: Single
Bevel Symmetry: 100/0
Hand Orientation: Right Handed
Handle: Western Pakka
Total Length: 276mm
Spine Length: 160mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 4.0mm
Thickness ~1cm from Tip: 3.6mm
Handle Length: 116mm
Weight: 260g
Saya/Guard: Purchased Separately

Hitohira - Hiragana - 150mm Deba - Pakka Handle - No Bolster

Hitohira - Hiragana - 250mm - Bread Knife - Western Handle

AAA-275-01-QA250

$50.00

Brand: Hitohira ひとひら (一片)
Line: Hiragana
Profile: Bread
Edge Length: 250mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Bevel: Serrated
Hand Orientation: Ambidextrous
Handle: Black Plastic Western
Total Length: 384mm
Spine Length: 250mm
Blade Height: 29mm
Thickness: 1.5mm
Handle Length: 133mm
Weight: 144g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Hiragana - 250mm - Bread Knife - Western Handle

Hitohira - Hiragana - 300mm Bread Knife - Western Handle

AAA-275-01-QA-300

$60.00

Brand: Hitohira ひとひら (一片)
Line: Hiragana
Profile: Bread
Edge Length: 300mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Bevel: Serrated
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Black Plastic Western
Total Length: 435mm
Spine Length: 300mm
Blade Height: 28mm
Thickness: 1.5mm
Handle Length: 135mm
Weight: 166g
Saya/Guard: No

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Hiragana - 300mm Bread Knife - Western Handle

Hitohira - Hiragana - WS - 210mm - Sujihiki - Octagonal Handle

daa-060-ga210

$95.00

Brand: Hitohira ひとひら (一片)
Line: Hiragana WS
Producing Area: Seki, Gifu - Japan
Profile: Sujihiki
Edge Length: 212mm
Edge Steel: AUS-8
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Pakka & Pakka Ferrule Octagonal
Total Length: 347mm
Spine Length: 222mm
Blade Height: 32mm
Thickness at Handle: 1.9mm
Thickness ½ way: 1.6mm
Thickness at Tip: 0.5mm
Handle Length: 125mm
Weight: 105g
Saya/Guard: Purchase Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Hiragana - WS - 210mm - Sujihiki - Octagonal Handle

Hitohira - Imojiya - MZ VG-1 - 165mm - Nakiri - Western Handle

AAA-268-09-LB165

$95.00

Brand: Hitohira ひとひら (一片)
Made In: Japan
Line: Imojiya MZ VG1
Profile: Nakiri
Edge Length: 160mm
Blade Height: 46mm
Edge Steel: VG1
Steel Type: Stainless
Cladding: Stainless Cladding
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 289mm
Spine Length: 170mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 118mm
Weight: 172g
Saya/Guard: Purchase Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya - MZ VG-1 - 165mm - Nakiri - Western Handle

Hitohira - Imojiya - MZ VG-1 - 165mm Santoku - Western Handle

AAA-268-09-CA165

$95.00

Brand: Hitohira ひとひら (一片)
Made In: Japan
Line: Imojiya MZ VG1
Profile: Santoku
Edge Length: 165mm
Blade Height: 46mm
Edge Steel: VG1
Steel Type: Stainless
Cladding: Stainless Cladding
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 288mm
Spine Length: 170mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 116mm
Weight: 150g
Saya/Guard: Purchase Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya - MZ VG-1 - 165mm Santoku - Western Handle

Hitohira - Imojiya MZ VG1 - 135mm Children's Knife - Pakka Handle

AAA-268-01-ZC135

$75.00

Brand: Hitohira ひとひら (一片)
Made In: Japan
Line: Imojiya MZ VG1
Profile: Children's Santoku
Edge Length: 130mm
Blade Height: 40mm
Edge Steel: VG1
Steel Type: Stainless
Cladding: Stainless Cladding
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 250mm
Spine Length: 143mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 1.2mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 105mm
Weight: 105g
Saya/Guard: Purchase Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya MZ VG1 - 135mm Children's Knife - Pakka Handle

Hitohira - Imojiya ST - VG10 - Tsuchime Damascus - 75mm Paring - Wa Handle

DAA-181-AA

$80.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya - Tsuchime Damascus
Smith: Seto 瀬戸
Producing Area: Seki, Gifu Prefecture
Profile: Paring
Edge Length: 75mm
Edge Steel: VG-10
Hardness: 60-61 HRC
Steel Type: Stainless
Cladding: Stainless Tsuchime Damscus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Octagonal pakka, pakka ferrule
Total Length: 198mm
Spine Length: 94mm
Handle Length: 114mm
Blade Height: 21mm
Thickness: 1.9mm
Weight: 67g
Saya/Guard: No

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya ST - VG10 - Tsuchime Damascus - 75mm Paring - Wa Handle

Hitohira - Imojiya ST - VG10 - Tsuchime Damascus - Utility - 135mm - Pakka Handle

DAA-181-BB

$90.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya VG-10
Smith: Seto 瀬戸
Producing Area: Seki-Gifu/ Japan
Profile: Utility
Edge Length: 136mm
Edge Steel: VG-10
Steel Type: Stainless
Hardness: 60-61HRC
Cladding: Stainless Tsuchime Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka & Pakka Ferrule Octagonal
Total Length: 255mm
Spine Length: 140mm
Blade Height: 34mm
Thickness: 1.7mm
Handle Length: 114mm
Weight: 94g
Saya/Guard: Sold Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya ST - VG10 - Tsuchime Damascus - Utility - 135mm - Pakka Handle

Hitohira - Imojiya TH - Stainless - Migaki - Petty - 150mm - Western Handle

AAA-266Z4-01-BA150

$75.00

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: Imojiya TH
Profile: Petty
Edge Length: 148mm
Blade Height: 29.5mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A Mono-Steel
Finish: Migaki (standard)
Bevel: Double Bevel (asymmetric)
Bevel Symmetry: 30/70
Hand Orientation: Ambidextrous
Handle Shape: Western (yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 148mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: .2mm
Handle Length: 115mm
Total Length: 257mm
Weight: 88mm
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Imojiya TH - Stainless - Migaki - Petty - 150mm - Western Handle

Hitohira - Imojiya TH - Stainless - Paring Knife - Western Pakka Handle

AAA-266S2-01-AA

$65.00

Brand: Hitohira ひとひら (一片)
Line: TH Stainless
Profile: Paring
Edge Length: 77mm
Blade Height: 20mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Mono
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Total Length: 190mm
Spine Length: 80mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 105mm
Weight: 58g
Saya/Guard: Purchased Sepatately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Imojiya TH - Stainless - Paring Knife - Western Pakka Handle

Hitohira - Imojiya TH - Stainless - Petty - 120mm - Pakka Handle

AAA-266Z4-01-BA120

$60.00

Brand: Hitohira ひとひら
Line: Imojiya TH
Made in: Seki, Gifu - Japan
Profile: Utility/Petty
Edge Length: 120mm
Blade Height: 27.7mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: Soft Stainless
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 120mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: .9mm
Handle Length: 103mm
Total Length: 228mm
Weight: 78mm
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Imojiya TH - Stainless - Petty - 120mm - Pakka Handle

Hitohira - Moribashi Plating Chopsticks - 120mm - Round Satine

aafga-2412

$85.00

Brand: Hitohira ひとひら (一片)
Product Type: Moribashi
Handle Material: Satine
Size: (Full Length): 260mm
Handle Length: 121mm
Weight: 60g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Moribashi Plating Chopsticks - 120mm - Round Satine

Hitohira - Oyster Knife - Seki - Stainless - Large

aadja-large

$15.00

Brand: Hitohira ひとひら (一片)
Profile: Oyster
Edge Length: 97mm
Hand Orientation: Ambidextrious
Handle: Ho Wood
Total Length: 212mm
Handle Length: 115mm
Blade Height:  16mm
Thickness of Spine at Handle: 2.8mm
Thickness of Spine Half Way:  2.6mm
Thickness of Spine ~1cm from Tip: 2.4mm
Weight: 83g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Oyster Knife - Seki - Stainless - Large

Hitohira - Oyster Knife - Seki - Stainless - Small

AADJA-SMALL

$12.00

Total Length: 150mm
Blade Length: 64mm
Handle Length: 85mm
Blade Height: 16mm
Weight: 54g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Oyster Knife - Seki - Stainless - Small

ISI - Easy Whip Mini Plus - 1/2 Pint - White + 10 Pack Chargers

134001

$70.00

For easy preparation of fresh, pure whipped cream. Ready in just a few seconds and can be kept in the refrigerator for up to 10 days. Stainless steel bottle, easy push bottom design, 2-year warranty (from ISI). Uses 1 iSi cream charger.

Capacity: 1/2 Pint

Color: White + Stainless Steel

ISI - Easy Whip Mini Plus - 1/2 Pint - White + 10 Pack Chargers

ISI - Easy Whip Plus - 1 Pint - Black + 10 Pack Chargers

156001

$85.00

For easy preparation of fresh, pure whipped cream. Ready in just a few seconds and can be kept in the refrigerator for up to 10 days. Stainless steel bottle, Easy push-button design, 2-year warranty (from ISI). Uses 1 iSi cream charger.

Capacity: 1 Pint

Color: Black + Stainless Steel