Single Bevel

Ajikataya - Kengata Single Bevel Hatchet - White #2 - Kurouchi - 180mm - Oak Handle

HMBDA-120-180

$250.00

Brand: Ajikataya 味方屋
Made In: Sanjo, Niigata - Japan
Line: Kengata Single Bevel Hatchet
Smith: Hinoura Blacksmith 日野浦刃物
Sharpener: Hinoura Blacksmith 日野浦刃物
Style: Single Bevel Kengata
Steel: Shirogami #2/White #2
Steel Type: Carbon
Edge Length: 193mm
Blade Height: 49.5mm
Blade Thickness: 5.3mm
Blade Construction: Awase, Ni-Mai
Blade Finish/Color: Kurouchi (forge finish)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Bolster: Iron
Pommel: N/A
Handle/Tang Construction: Partial Tang
Handle Material: Oak
Handle Length: 167mm
Total Length: 365mm
Weight: 395g
Sheath/Clip: Belt Sheath

Ajikataya - Kengata Single Bevel Hatchet - White #2 - Kurouchi - 180mm - Oak Handle

Hitohira - Echizen - Blue #2 - Damascus - 210mm Yanagiba - Rosewood Handle

AAA-550-06-IA210

$200.00

Brand: Hitohira ひとひら (一片)
Line: Echizen
Profile: Yanagiba
Edge Length: 203mm
Blade Height: 31mm
Edge Steel: Blue #2
Steel Type: Carbon
Construction: Awase/Clad, Ni Mai
Cladding: Soft Iron
Finish: Damascus
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right Handed
Handle Shape: D-Shaped
Handle Material: Rosewood
Ferrule/Bolster Material: Pakka
Spine Length: 213mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 130mm
Total Length: 342mm
Weight: 120g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Echizen - Blue #2 - Damascus - 210mm Yanagiba - Rosewood Handle

Hitohira - Kikuchiyo - Rikichi - Blue #2 - 150mm Kiritsuke Yanagiba - Ho Wood Handle

AAA-055B2-05-IB150

$185.00

Brand: Hitohira ひとひら
Made in: Sakai-Osaka/ Japan
Smith: Kikuchiyo 菊千代
Sharpener: Rikichi 利吉
Line: Kikuchiyo x Rikichi
Profile: Sakai-Osaka/ Japan
Edge Length: 141mm
Blade Height: 26mm
Edge Steel: Yasuki Blue (Aogami) #2
Steel Type: Carbon
Construction: Awase/Clad, Ni-Mai
Cladding: Soft Stainless
Finish: Migaki
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Ho Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 154mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 131mm
Total Length: 289mm
Weight: 83g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Kikuchiyo - Rikichi - Blue #2 - 150mm Kiritsuke Yanagiba - Ho Wood Handle

Hitohira - Kikuchiyo x Manzo - Blue #2 - 165mm Deba - Ho Wood - Saya

aaa-510-05-na165

$315.00

Brand: Hitohira ひとひら (一片)
Smith: Kikuchiyo 菊千代
Sharpener: Manzo 万造
Profile: Deba
Edge Steel: Blue #2 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Single Bevel
Hand Orientation: Right Handed
Handle: Ho Wood Wa
Total Length: 310mm
Edge Length: 170mm
Spine Length: 182mm
Blade Height: 52mm
Thickness at Spine: 8mm
Thickness ½ way: 6mm
Thickness ~1cm from Tip: 3mm
Handle Length: 128mm
Weight: 299g
Saya/Guard: Yes

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Kikuchiyo x Manzo - Blue #2 - 165mm Deba - Ho Wood - Saya

Hitohira - Kikuchiyo x Manzo - Blue #2 - 270mm - Kiritsuke Yanagiba - Ho Wood Handle - Saya

aaa-510-05-ib270

$395.00

Brand: Hitohira ひとひら (一片)
Black Smith: Kikuchiyo 菊千代
Sharpener: Manzo 万造
Profile: Yanagiba
Edge Steel: Blue #2 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Single Bevel
Hand Orientation: Right Handed
Handle: Ho Wood Wa
Total Length: 423mm
Edge Length: 264mm
Spine Length: 279mm
Blade Height: 33mm
Thickness at Spine: 4mm
Thickness ½ way: 3.1mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 145mm
Weight: 188g
Saya/Guard: Yes

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Kikuchiyo x Manzo - Blue #2 - 270mm - Kiritsuke Yanagiba - Ho Wood Handle - Saya

Hitohira - Kikuchiyo x Manzo - Blue #2 - 270mm Yanagiba - Ho Wood Handle - Saya

aaa-510-05-ia270

$325.00

Brand: Hitohira
Black Smith: Kikuchiyo
Sharpener: Manzo
Profile: Yanagiba
Edge Steel: Blue #2 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Single Bevel
Hand Orientation: Right Handed
Handle: Ho Wood Wa
Total Length: 417mm
Edge Length: 262mm
Spine Length: 277mm
Blade Height: 34mm
Thickness at Spine: 4.5mm
Thickness ½ way: 3.2mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 140mm
Weight: 205g
Saya/Guard: Yes

Hitohira - Kikuchiyo x Manzo - Blue #2 - 270mm Yanagiba - Ho Wood Handle - Saya

Hitohira - Kikuchiyo x Manzo - Blue #2 - 330mm Yanagiba - Ho Wood Handle

aaa-510-05-ia330

$450.00

Brand: Hitohira ひとひら (一片)
Smith: Kikuchiyo 菊千代
Sharpener: Manzo 万造
Profile: Yanagiba
Edge Steel: Blue #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Single Bevel
Hand Orientation: Right Handed
Handle: Poplar Wa
Total Length: 490mm
Edge Length: 322mm
Spine Length: 337mm
Blade Height: 38mm
Thickness at Spine: 4.7mm
Thickness ½ way: 3.5mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 151mm
Weight: 264g
Saya/Guard: Yes

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Kikuchiyo x Manzo - Blue #2 - 330mm Yanagiba - Ho Wood Handle

Hitohira - Kikuchiyo x Mosuke - Enmon - White #1 Damascus - 270mm Kiritsuke - Taihei Ebony Handle

$995.00

Brand: Hitohira ひとひら (一片)
Blacksmith: Kikuchiyo 菊千代
Sharpener: Mosuke モスケ
Profile: Kiritsuke
Edge Steel: White #1 (Shirogami)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Single Bevel
Hand Orientation: Right Handed
Handle: Ziricote Wa
Total Length: 430mm
Edge Length: 257mm
Spine Length: 278mm
Blade Height: 46mm
Thickness at Spine: 4.2mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.6
Handle Length: 152mm
Weight: 281g
Saya/Guard: Yes, Ho Wood

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Kikuchiyo x Mosuke - Enmon - White #1 Damascus - 270mm Kiritsuke - Taihei Ebony Handle

Hitohira - Kikuchiyo x Mosuke - White #1 Enmon Damascus - 300mm Yanagiba - Lacquered Handle

AAA-055W1-60-LA300

$825.00 $725.00 Save $100.00

Brand: Hitohira ひとひら (一片)
Black Smith: Kikuchiyo 菊千代
Sharpener: Mosuke モスケ
Profile: Yanagiba
Edge Steel: White #1 (Shirogami)
Steel Type: Carbon
Cladding: Soft Iron Damascus
Bevel: Single Bevel
Hand Orientation: Right Handed
Handle: Gold & Black Lacquered Handle
Total Length: 455mm
Edge Length: 290mm
Spine Length: 307mm
Blade Height: 35mm
Thickness at Spine: 3.8mm
Thickness ½ way: 3.2mm
Thickness ~1cm from Tip: 1.2
Handle Length: 147mm
Weight: 203g
Saya/Guard: Sold Separately

Disclaimer: Single Bevel Knives are sold "Factory Sharp". Sharpening requests are subject to wait times.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Kikuchiyo x Mosuke - White #1 Enmon Damascus - 300mm Yanagiba - Lacquered Handle

Hitohira - Kurouchi - White #2 - Shakekiri - 240mm - Poplar Handle

AAA-052-51-NI240

$250.00

Brand: Hitohira ひとひら
Made in: Echizen, Fukui - Japan
Profile: Shakekiri
Edge Length: 241mm
Blade Height: 68mm
Edge Steel: Shirogami #2 (white #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval
Handle Material: Poplar
Ferrule/Bolster Material: Plastic Ferrule
Spine Length: 255mm
Thickness of Spine at Handle: 5.2mm
Thickness ½ way: 5.0mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 143mm
Total Length: 396mm
Weight: 288g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Kurouchi - White #2 - Shakekiri - 240mm - Poplar Handle

Hitohira - Kurouchi - White #2 - Shakekiri 270mm - Poplar Handle

AAA-052-51-NI270

$285.00

Brand: Hitohira ひとひら
Made in: Echizen-Fukui, Japan
Profile: Shakekiri
Edge Length: 272mm
Blade Height: 78mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad), Ni Mai
Cladding: Soft Iron
Finish: Kurouchi (forge finish)
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval
Handle Material: Poplar
Ferrule/Bolster Material: Plastic
Spine Length: 291mm
Thickness of Spine at Handle: 6.1mm
Thickness ½ way: 4.6mm
Thickness ~1cm from Tip: 1.9mm
Handle Length: 152mm
Total Length: 441mm
Weight: 437g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Kurouchi - White #2 - Shakekiri 270mm - Poplar Handle

Hitohira - Tanaka x Manzo - Blue #1 - 270mm Yanagiba - Magnolia Handle (D-Shape/ Saya)

AAA-115B1-05-IA270

$330.00

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Tanaka Blacksmith 田中打刃物製作所 
Sharpener: Manzō 万造
Line: Tanaka x Manzo
Profile: Yanagiba
Edge Length: 264mm
Blade Height: 34mm
Edge Steel: Blue #1
Steel Type: Carbon
Construction: Awase/Clad, Ni-Mai
Cladding: Soft Iron
Finish: Migaki
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: D-Shape
Handle Material: Ho Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 277mm
Thickness of Spine at Handle: 3.8mm
Thickness ½ way: 3.0mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 139mm
Total Length: 417mm
Weight: 163g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Tanaka x Manzo - Blue #1 - 270mm Yanagiba - Magnolia Handle (D-Shape/ Saya)

Hitohira - Tanaka x Mosuke - Blue #1 - 300mm Kiritsuke Yanagiba - Magnolia Handle - Saya

AAA-110B1O-05-IB300

$525.00

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Tanaka Uchihamono 田中打刃物
Sharpener: Mosuke モスケ
Line: Tanaka x Mosuke
Profile: Kiritsuke Yanagiba
Edge Length: 291mm
Blade Height: 36mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase, San-Mai
Cladding: Soft Iron
Finish: Migaki (standard)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 448mm
Spine Length: 305mm
Thickness of Spine at Handle: 4.0mm
Thickness ½ way: 3.1mm
Thickness ~1cm from Tip: 2.4mm
Handle Length: 143mm
Weight: 207g
Saya/Guard: Saya

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Tanaka x Mosuke - Blue #1 - 300mm Kiritsuke Yanagiba - Magnolia Handle - Saya

Hitohira - Tanaka x Mosuke - Blue #1 - 330mm Yanagiba - Magnolia Handle - Saya

AAA-111B1O-05-IA330

$575.00

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Tanaka Uchihamono 田中打刃物
Sharpener: Mosuke モスケ
Line: Tanaka x Mosuke
Profile: Yanagiba
Edge Length: 319mm
Blade Height: 36mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase, Ni-Mai
Cladding: Soft Iron
Finish: Migaki (standard)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 483mm
Spine Length: 333mm
Thickness of Spine at Handle: 4.0mm
Thickness ½ way: 3.4mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 149mm
Weight: 253g
Saya/Guard: Saya

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Tanaka x Mosuke - Blue #1 - 330mm Yanagiba - Magnolia Handle - Saya

Hitohira - Tanaka x Mosuke - Blue #1 - Mirror Polished - 300mm Yanagiba - Ebony Handle - Saya

AAA-075B1K-04-IA300

$650.00

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Tanaka Uchihamono 田中打刃物
Sharpener: Mosuke モスケ
Line: Tanaka x Mosuke
Profile: Yanagiba
Edge Length: 292mm
Blade Height: 36mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase, Ni-Mai
Cladding: Soft Iron
Finish: Mirror Polish (kyomen)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Total Length: 449mm
Spine Length: 306mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 3.2mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 144mm
Weight: 231g
Saya/Guard: Saya

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Tanaka x Mosuke - Blue #1 - Mirror Polished - 300mm Yanagiba - Ebony Handle - Saya

Hitohira - Togashi - Blue #1 - Mizu Honyaki - 300mm Yanagiba - Taihei Ebony Handle (Saya)

AAA-136B1T-49-IA300

$1,500.00

Brand: Hitohira ひとひら
Made in: Sakai-Osaka/ Japan
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi 憲哉
Line: Togashi Blue #1 Mizu Honyaki
Profile: Yanagiba
Edge Length: 290mm
Blade Height: 41mm
Edge Steel: Honyaki Yasuki Blue (Aogami) #1
Steel Type: Carbon
Construction: Honyaki (differentially hardened)
Cladding: N/A
Finish: Forced Patina
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Taihei Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 304mm
Thickness of Spine at Handle: 3.8mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 146mm
Total Length: 450mm
Weight: 242g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Togashi - Blue #1 - Mizu Honyaki - 300mm Yanagiba - Taihei Ebony Handle (Saya)

Hitohira - Togashi - Blue #1 - Mizu Honyaki - 330mm Yanagiba - Taihei Ebony Handle - Saya

AAA-136B1-63-IA330

$1,975.00

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Togashi 富樫
Sharpener: Kenya Togashi
Profile: Yanagiba
Edge Length: 318mm
Blade Height: 37mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Mizu Honyaki (Differentially Hardened)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Taihei Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 335mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 2.0mm
Handle Length: 152mm
Total Length: 482mm
Weight: 285g
Saya/Guard: Included

Hitohira - Togashi - Blue #1 - Mizu Honyaki - 330mm Yanagiba - Taihei Ebony Handle - Saya

Hitohira - Togashi - White #1 - Mizu Honyaki - Fugubiki - 300mm - Taihei Makassar Ebony Handle (w/ saya)

AAA-136W1-63-MA300

$1,350.00

Brand: Hitohira ひとひら
Line: Togashi White #1, Mizu Honyaki
Made in: Sakai, Osaka - Japan
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi
Profile: Fugubiki
Edge Length: 291mm
Blade Height: 32mm
Edge Steel: Shirogami #1 (white #1)
Steel Type: Carbon
Construction: Honyaki (Differentially Hardened)
Cladding: N/A
Finish: Mirror (Kyomen)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right Handed
Handle Shape: Octagonal
Handle Material: Makassar Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 309mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: .8mm
Handle Length: 144mm
Total Length: 452mm
Weight: 140g
Saya/Guard: Saya Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Togashi - White #1 - Mizu Honyaki - Fugubiki - 300mm - Taihei Makassar Ebony Handle (w/ saya)

Hitohira - Togashi - White #1 - Tanryumon Mizu Honyaki - 300mm Yanagiba - Kurokaki Persimmon Handle (Saya)

AAA-136B1-57-IA300

$1,250.00

Brand: Hitohira ひとひら (一片)
Producing Area: Sakai, Osaka - Japan
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi
Line: Togashi Honyaki
Profile: Yanagiba
Edge Length: 288mm
Blade Height: 35mm
Edge Steel: Shirogami #1/White #1
Steel Type: Carbon
Construction: Mizu Honyaki
Cladding: N/A
Finish: Sanbonsugi
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right Handed
Handle Shape: Octagonal
Handle Material: Kurokaki Persimmon
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 305mm
Thickness of Spine at Handle: 4.2mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 145mm
Total Length: 450mm
Weight: 239g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Togashi - White #1 - Tanryumon Mizu Honyaki - 300mm Yanagiba - Kurokaki Persimmon Handle (Saya)

Hitohira - Togashi - White #1 Mizu Honyaki - 300mm Sakimaru Yanagiba - Taihei Ebony Handle - Saya

AAA-136W1-63-IC300

$1,450.00

Brand: Hitohira ひとひら (一片)
Made in: Sakai, Osaka - Japan
Smith: Kenji Togashi 富樫
Sharpener: Kenya Togashi (憲哉)
Line: Mizu Honyaki
Profile: Yanagiba Sakimaru
Edge Length: 300mm
Blade Height: 35.5mm
Edge Steel: Shirogami #1/White #1
Steel Type: Carbon
Construction: Honyaki
Cladding: N/A
Finish: Mirror Polished
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Wa
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Total Length: 457mm
Spine Length: 315mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1mm
Handle Length: 148mm
Weight: 262g
Saya/Guard: Yes, saya included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Togashi - White #1 Mizu Honyaki - 300mm Sakimaru Yanagiba - Taihei Ebony Handle - Saya

Hitohira - Togashi - White #2 - Yanagiba - 330mm - Magnolia Handle (D-Shaped) - Saya

AAA-080W2T-04-IA330

$325.00

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Togashi 富樫
Sharpener: Kenya Togashi
Profile: Yanagiba
Edge Length: 312mm
Blade Height: 37mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Migaki (Standard)
Bevel: Single
Hand Orientation: Right-Handed
Handle Shape: D-Shape
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 336mm
Thickness of Spine at Handle: 4.2mm
Thickness ½ way: 4.0mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 150mm
Total Length: 486mm
Weight: 2590g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.