Sharpening Supplies

Brand: HI-CONDITION ハイコンディション
Producing Area: Tokyo/ Japan
Size: 10"L x 2"W x 1"D
Weight: 350g

Really high quality, bare hard felt strop on a firm base so it has no give.

Felt strops will be slightly more efficient at cleaning up edges post sharpening/maintaining than leather, and you could certainly finish off of them. Ideal for softer western knives, butcher knives, and other higher-volume knives.

Use only an edge-trailing/draw stroke. Can be loaded with micron abrasive pastes or sprays. Clean periodically with a slightly damp rag, allow to dry before using.

Brand: HI-CONDITION ハイコンディション
Producing Area: Tokyo/ Japan
Size: 10"L x 2"W x 1"D
Weight: 399g

Really high quality, bare leather felt strop on a firm base so it has no give.

Leather strops will be slightly better at finishing edges post sharpening/maintenance (or as a stand alone tool) than felt strops. Leather strops work on an array of knives, and are especially ideal for Japanese knives and other fine blades.

Use only an edge-trailing/draw stroke. Can be loaded with micron abrasive pastes or sprays. Clean periodically with a slightly damp rag, allow to dry before using.

High grit powder of assorted quality stones. Ideal for fine-tune polishing or to remove light rust. Can be applied with numerous applicators like a cotton ball, rag, cork, felt, balsa wood, etc. Water is needed to apply. May require further powderizing of any potential slightly larger bits. Use last after Ozuko powder and after Suita powder.

Brand: Hitohira ひとひら
Product Type: Finger Stone
Size: 100g
Mine: Narutaki
Producing Area: Kyoto/ Japan
Soaking Requirement: Not required
Weight: 100g 

Nagura

Nagura are very helpful in both increasing the efficiency of metal removal by adding grit on top of the stone, but also in creating unique, multi-grit slurry combinations important for polishing purposes. They can also be used to condition the surface of the sharpening stone after using a flattening plate or after extended periods of sharpening to remove particulate.

Brand: Hitohira ひとひら
Producing Area: Kyoto - Japan
Mine: Mizukihara
Length: 35mm
Width: 60mm
Height: 35mm
Weight: 200-250g

Given the natural aspect of these stones, all graded characteristics are our own subjective thoughts which may vary from your expectations and assessment. The images shown and characteristics described may be from a previous, random example, or when first measured before being tested numerous times. If purchased, yours may differ slightly in appearance and qualities. All stone sales are final.

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片)
Producing Area: Kyoto - Japan
Appearance: Asagi backdrop with numerous Aka Renge 
Width:70mm
Length: 193mm
Height: 18.7mm
Weight: 583g
Grit Range: 6000-8000

1-5 Scale: 1 = Less, 5 = More
Hardness Level: 4.5
Scratch Depth: 1.5
Speed: 4
Wear Rate: 1.5
Self Slurry: 2
Ease of Use: 3.5

Recommended Usage: Fast, bright Kasumi or polished Hagane (Ha-to?); scratch removal from sub 6000 grit; final pre polisher; push cut tools; Uraoshi sharpening; microbevels.

Notes: Amazing value, super consistent specimen. Provides a very fast and easy bright Kasumi. A little harder than more expensive Uchigumori, so be mindful with pressure. Hard enough for push cut tools. The line can only be felt with the fingers when actively feeling for it and not when polishing wide bevels, and it has no effect on the result. A really awesome option for those who want to try their first Uchigumori.

Please Note: Given the natural aspect of these stones, all subjective qualities are our estimates and may vary slightly from your exact expectations and assessment. The images shown and characteristics described may be from a previous example. If purchased, yours may differ slightly in appearance and qualities. Dimensions, weight, and stamps may be different from listed if it has been tested.

Nagura

Nagura are very helpful in both increasing the efficiency of metal removal by adding grit on top of the stone, but also in creating unique, multi-grit slurry combinations important for polishing purposes. They can also be used to condition the surface of the sharpening stone after using a flattening plate or after extended periods of sharpening to remove particulate.

Brand: Hitohira ひとひら
Producing Area: Kyoto - Japan
Mine: Mizukihara
Length: 70mm
Width: 500mm
Height: 34mm
Weight: 250-300g

Given the natural aspect of these stones, all graded characteristics are our own subjective thoughts which may vary from your expectations and assessment. The images shown and characteristics described may be from a previous, random example, or when first measured before being tested numerous times. If purchased, yours may differ slightly in appearance and qualities. All stone sales are final.

Brand: Imanishi 今西製砥
Product Type: Flattening Stone
Size: 208 x 68 x 33mm
Weight: 847g

For all of your stone flattening needs!

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

One of our most trusted sources handpicks these stones from the famed Imanishi in Kyoto for us, spending hours testing dozens and dozens and selecting only the best of the best at a variety of price points. These tennen toishi represent some of the best value you will find on the market for natural stones.

These stones are so impressive that they often make you feel like you are "cheating", so to speak - they provide outstanding results at a speed seemingly found only in stones that cost many times more, all while being fun and easy to use - they make it seem as if you have learned years of polishing in a matter of minutes. Combining these gems with the correct steel, you will come to understand the beautiful harmony skilled polishers sometimes have difficulty describing - working on natural stones with well-made knives truly ties the whole subject together.

We are proud to provide such wonderful pieces to you!

Brand: Komon-picked Imanishi
Producing Area: 
Appearance: Near-pure white with the faintest tint of green; a few goma speckled in 
Size: 205mm x 60mm x 38mm
Weight: 901g
~Grit Range: 1500-3000

1-5 Scale: 1 = Less, 5 = More
Hardness Level: 3.5
Scratch Depth: 2.5
Speed: 4
Wear Rate: 2
Self Slurry: 2
Thirst: 2
Consistency: 4.5
Feedback: 2.5
Ease of Use: 3.5

Notes: Koma Nagura stones are a staple in traditional sword polishing progressions—and are often used in razor and fine tool sharpening as well. Pure, high-quality examples like this are increasingly rare, and we’re fortunate to have sourced one. Typically used after Chu Nagura and before Uchigumori, Koma plays a crucial role in refining the foundation polish, allowing Uchigumori stones to fully express their potential. This particular stone is fast-cutting, with black slurry forming in seconds, and it effortlessly removes scratches even from stones more than half its grit level–a polisher dream!

It finishes with a warm, frosty kasumi that’s both beautiful and distinct. Working the jigane for just a few minutes can start to reveal banding, offering exceptional visual depth. Initial feedback has a bit of texture and grip, which quickly smooths out as slurry builds. It’s also hard enough to handle push-cut tools and even Ura on single bevel knives. Obviously effective on knife edges, but given its rarity it is advised that it be mostly reserved for polishing or wide bevel applications. For faster cutting and more even feedback, using a nagura, preferably a tomo nagura, could help. 

Simply put, this is an incredible find for anyone building a premium polishing progression—or a collector seeking something truly special.

Recommended Usage: Pre polisher, frosty kasumi, gnarly edges, push cut tools

Disclaimer: Given the natural aspect of these stones, all graded characteristics are our own subjective thoughts which may vary from your expectations and assessment. The images shown and characteristics described may be from a previous, random example, or when first measured before being tested numerous times. If purchased, yours may differ slightly in appearance and qualities. All stone sales are final.

One of our most trusted sources handpicks these stones from the famed Imanishi in Kyoto for us, spending hours testing dozens and dozens and selecting only the best of the best at a variety of price points. These tennen toishi represent some of the best value you will find on the market for natural stones.

These stones are so impressive that they often make you feel like you are "cheating", so to speak - they provide outstanding results at a speed seemingly found only in stones that cost many times more, all while being fun and easy to use - they make it seem as if you have learned years of polishing in a matter of minutes. Combining these gems with the correct steel, you will come to understand the beautiful harmony skilled polishers sometimes have difficulty describing - working on natural stones with well-made knives truly ties the whole subject together.

We are proud to provide such wonderful pieces to you!

Brand: Komon-picked Imanishi
Producing Area: Kyoto - Japan
Strata: Suita
Appearance: Stunning white and light-gray surface with some small Aka Renge. A large number of visible Su. Some, only one can be very faintly felt but has no negative effects.
Size: 212mm x 80mm x 40mm
Weight: 1614g
~Grit Range: 2500-4000

1-5 Scale: 1 = Less, 5 = More
Hardness Level: 2.5
Scratch Depth: 2
Speed: 4
Wear Rate: 2
Self Slurry: 3.5
Thirst: 2.5
Consistency: 4
Feedback: 2
Ease of Use: 4

Notes: A beautiful stone both aesthetically and for polishing results - great coloring effects, leaves a soft transition at the cladding line. A very consistent, easy to use, and very, very fast stone. A very fine black slurry forms pretty much immediately, and a gray slurry when working the whitter spots, and working the slurry further creates an incredibly smooth feedback. Scratches are incredibly uniform and pretty shallow. You could finish on this for a frosty kasumi, or has a really fast pre polisher for something brighter. Pretty much an ideal stone for wide bevels. It feels almost pillowy-soft and has a slightly chalky feedback almost akin to working a Nagura, in fact you could largely substitute one for another. Given its ease of use intermediate users could quickly benefit, but you would certainly find this in a professional polishers arsenal.

Recommended Usage: Pre-polishing, final polish, super refined edges. Could be used for push cuts if used with light pressure. 

Disclaimer: Given the natural aspect of these stones, all graded characteristics are our own subjective thoughts which may vary from your expectations and assessment. The images shown and characteristics described may be from a previous, random example, or when first measured before being tested numerous times. If purchased, yours may differ slightly in appearance and qualities. All stone sales are final.

One of our most trusted sources handpicks these stones from the famed Imanishi in Kyoto for us, spending hours testing dozens and dozens and selecting only the best of the best at a variety of price points. These tennen toishi represent some of the best value you will find on the market for natural stones.

These stones are so impressive that they often make you feel like you are "cheating", so to speak - they provide outstanding results at a speed seemingly found only in stones that cost many times more, all while being fun and easy to use - they make it seem as if you have learned years of polishing in a matter of minutes. Combining these gems with the correct steel, you will come to understand the beautiful harmony skilled polishers sometimes have difficulty describing - working on natural stones with well-made knives truly ties the whole subject together.

We are proud to provide such wonderful pieces to you!

Brand: Komon-picked Imanishi
Producing Area: Kyoto 
Mine: Hideriyama 
Strata: Suita
Appearance: Asagi green with streaks of Namazu
Size: 2,567g
Weight: 238mm x 75mm x 73mm
~Grit Range: 3000-5000

1-5 Scale: 1 = Less, 5 = More
Hardness Level: 2.5
Scratch Depth: 2.5
Speed: 4
Wear Rate: 3
Self Slurry: 4
Thirst: 3.5
Consistency: 5
Feedback: 3
Ease of Use: 4

Notes: An extremely rare vintage Hideriyama Suita, especially in this large format. A true pleasure to use — it offers silky feedback with a slurry that develops quickly and yields an exceptionally consistent scratch pattern. The resulting kasumi finish is warm and rich and can be achieved with ease and speed. Depending on your approach, you can stop early for a hazy-to-frosty kasumi, or continue on in your polishing sequence for a brighter finish.

Thanks to its generous surface area and substantial thickness, this stone will provide years of use. However, as it’s not particularly hard (though not overly soft either), it’s important to work the surface evenly to avoid localized dishing. It’s likely too soft for push-cut tools, but perfect for wide bevel polishing, even convex grinds.

This is an outstanding stone for collectors due to its rarity, quality, and vintage provenance. While best suited for intermediate to advanced users, its forgiving nature also makes it accessible to mindful beginners.

Recommended Usage: Hazy to frost kasumi, pre or pre pre polisher, convex grinds, refined but textured edges.

Disclaimer: Given the natural aspect of these stones, all graded characteristics are our own subjective thoughts which may vary from your expectations and assessment. The images shown and characteristics described may be from a previous, random example, or when first measured before being tested numerous times. If purchased, yours may differ slightly in appearance and qualities. All stone sales are final.

The Tempered Glass Lapping Plate is designed for efficiently and thoroughly flattening NSK Kogyo Diamond Stones, especially for grits 1500 and below. Its large, extremely hard, and perfectly flat surface allows for more consistent flattening than using only the Stone Resurfacer or NSK Kogyo Flattening Stone, while also helping to reduce wear on flattening stones over time.

Because tempered glass maintains flatness exceptionally well, it provides a long-lasting, reliable reference surface for your stones. For best results, it should be used in conjunction with the other flattening tools.

Recommended Flattening Sequence
 1. Stone Resurfacer
 2. Tempered Glass Plate (with slurry generated from the resurfacer)
 3. NSK Kogyo Flattening Stone (closest respective grit)

This sequence ensures a fully flat surface and prolongs the life of your stones and flatteners.

More information can be found on Komon’s website.

Brand: NSK Kogyo Ltd.
Length: 250mm
Width: 150mm
Height: 8mm
Weight: 730g

Nagura

Nagura are very helpful in both increasing the efficiency of metal removal by adding grit on top of the stone, but also in creating unique, multi-grit slurry combinations important for polishing purposes. They can also be used to condition the surface of the sharpening stone after using a flattening plate or after extended periods of sharpening to remove particulate.

Brand: Hitohira ひとひら
Length: 45mm 
Width: 45mm
Height: 48mm
Weight: 271g

Given the natural aspect of these stones, all graded characteristics are our own subjective thoughts which may vary from your expectations and assessment. The images shown and characteristics described may be from a previous, random example, or when first measured before being tested numerous times. If purchased, yours may differ slightly in appearance and qualities. All stone sales are final.

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Fine powder of Suita stones. Ideal for fine-tune polishing. Can be applied with numerous applicators like a cotton ball, rag, cork, felt, balsa wood, etc. Water is needed to apply. May require further powderizing of any potential slightly larger bits. Middle fineness of the natural stone powders.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Naniwa ナニワ研磨工業
Stone Length: 270mm
Stone Width: 70mm
Stone Height: 10mm
#1000 Grit Stone Weight: 315g
#3000 Grit Stone Weight: 297g

Soaking Requirement: Several minutes

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.