NSK Kogyo - Diamond Stone - Oboro Knife - #800

Brand: HI-CONDITION ハイコンディション
Producing Area: Tokyo/ Japan
Size: 10"L x 2"W x 1"D
Weight: 350g

Really high quality, bare hard felt strop on a firm base so it has no give.

Felt strops will be slightly more efficient at cleaning up edges post sharpening/maintaining than leather, and you could certainly finish off of them. Ideal for softer western knives, butcher knives, and other higher-volume knives.

Use only an edge-trailing/draw stroke. Can be loaded with micron abrasive pastes or sprays. Clean periodically with a slightly damp rag, allow to dry before using.

Brand: HI-CONDITION ハイコンディション
Producing Area: Tokyo/ Japan
Size: 10"L x 2"W x 1"D
Weight: 399g

Really high quality, bare leather felt strop on a firm base so it has no give.

Leather strops will be slightly better at finishing edges post sharpening/maintenance (or as a stand alone tool) than felt strops. Leather strops work on an array of knives, and are especially ideal for Japanese knives and other fine blades.

Use only an edge-trailing/draw stroke. Can be loaded with micron abrasive pastes or sprays. Clean periodically with a slightly damp rag, allow to dry before using.

Brand: Hitohira ひとひら
Product Type: Finger Stone
Size: 100g
Mine: Narutaki
Producing Area: Kyoto/ Japan
Soaking Requirement: Not required
Weight: 100g 

Brand: Hitohira ひとひら (一片)
Producing Area: Kyoto, Kyoto Prefecture - Japan
Appearance: Classic Uchigumori gray/purple with Aka Renge and some a few Namazu streaks
Size: 180mm x 66mm x 23mm
Weight: 647g
Grit Range: 4000-6000

1-5 Scale: 1 = Less, 5 = More
Hardness Level: 4.5
Scratch Depth: 1.5
Speed: 4
Wear Rate: 1.5
Self Slurry: 2
Thirst: 2
Consistency: 4
Ease of Use: 3.5

Recommended Usage: Fast, bright Kasumi or polished Hagane (Ha-to?); scratch removal from sub 6000 grit; final pre polisher; push cut tools; Uraoshi sharpening; microbevels.

Notes: Amazing value, super consistent specimen. Provides a very fast and easy bright Kasumi. A little harder than more expensive Uchigumori, so be mindful with pressure. Hard enough for push cut tools. The line can only be felt with the fingers when actively feeling for it and not when polishing wide bevels, and it has no effect on the result. A really awesome option for those who want to try their first Uchigumori.

Please Note: Given the natural aspect of these stones, all subjective qualities are our estimates and may vary slightly from your exact expectations and assessment. The images shown and characteristics described may be from a previous example. If purchased, yours may differ slightly in appearance and qualities. Dimensions, weight, and stamps may be different from listed if it has been tested.

Brand: Hitohira ひとひら
Product Type: Finger Stone
Mine: Mizukihara
Producing Area: Kyoto/ Japan
Layer: Uchigumori
Soaking Requirement: Not required
Weight: 100g