Brand: Hitohira ひとひら (一片)
Made in: Japan
Line: TD Blue #2
Profile: Santoku
Edge Length: 166mm
Blade Height: 48mm
Edge Steel: Aogami #2/Blue #2
Steel Type: Carbon
Grind: Wide Double Bevel
Construction: Awase, San-Mai
Cladding: Soft Stainless
Finish: Kurouchi (forge finish)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Right-Handed D-Shaped
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 308mm
Spine Length: 180mm
Thickness of Spine at Handle: 4.7mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 130mm
Weight: 127g
Saya/Guard: Purchased Separately
You may also like
Brand: Blenheim Forge
Made in: London, United Kingdom
Line: Classic Range
Profile: Santoku
Edge Length: 177mm
Blade Height: 52mm
Edge Steel: Super Blue
Steel Type: Carbon
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi, Nashiji, Damascus, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: English Walnut Handle
Ferrule/Bolster Material: Copper
Spine Length: 189mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 128mm
Total Length: 317mm
Weight: 173g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Brand: Blenheim Forge
Made in: London, United Kingdom
Line: Stainless Clad
Profile: Santoku
Edge Length: 173mm
Blade Height: 55mm
Edge Steel: Super Blue
Steel Type: Carbon
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 184mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 128mm
Total Length: 311mm
Weight: 166g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Brand: Hitohira ひとひら (一片)
Made in: Seki-Gifu/ Japan
Line: FJ SG2 Mirror
Profile: Bunka
Edge Length: 179mm
Blade Height: 47mm
Edge Steel: SG2 Powder Metal
Steel Type: Stainless
Grind: Convex
Construction: Awase Clad
Cladding: Stainless
Finish: Mirror
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Linen Micarta
Ferrule/Bolster Material: Stainless Steel
Total Length: 296mm
Spine Length: 173mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 120mm
Weight: 173g
Saya/Guard: Purchased Separately
Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.
Brand: Hitohira ひとひら
Line: FJ VG-10
Made in: Seki, Gifu - Japan
Profile: Santoku
Edge Length: 175mm
Blade Height: 47mm
Edge Steel: VG-10
Steel Type: Stainless
HRC: 60±0.5
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 178mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 119mm
Total Length: 297mm
Weight: 161g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Brand: Hitohira ひとひら (一片)
Line: Futana
Profile: Bunka
Edge Steel: Ginsanko
Steel Type: Stainless
Cladding: Soft Stainless Nashiji
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry Octagonal
Total Length: 322mm
Edge Length: 175mm
Spine Length: 187mm
Blade Height: 43mm
Spine Thickness: 1.8mm
Handle Length: 135mm
Weight: 117g
Saya: Purchased Separately.
Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.
Line: Futana
Profile: Santoku
Edge Length: 184mm
Edge Steel: Ginsanko (Silver 3)
Steel Type: Stainless
Cladding: Stainless Nashiji
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry wood handle & ebony ferrule
Total Length: 315mm
Spine Length: 182mm
Handle Length: 133mm
Blade Height: 47mm
Thickness of Spine at Handle: 1.9mm
Thickness of Spine Half Way: 1.4mm
Thickness of Spine ~1cm from Tip: 1mm
Weight: 125g
Saya: N/A
Please Note: These pictures and measurements are examples. Individual knives may differ
slightly in appearance and measurements.