Sale-able

Brand: Hitohira ひとひら (一片)
Line: KH MV
Made in: Seki, Gifu - Japan 
Profile: Yo Deba
Edge Length: 183mm
Blade Height: 48mm 
Edge Steel: Molybdenum Vanadium 
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 188mm 
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 3.1mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 117mm 
Total Length: 305mm 
Weight: 235g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Made in: Seki, Gifu - Japan
Line: Imojiya TH
Profile: Nakiri
Edge Length: 165mm
Blade Height: 47.5mm
Edge Steel:  DSR-1K6
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Asymmetric Double 
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 177mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 139mm
Total Length: 320mm
Weight: 149g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら
Made in: Seki-Gifu, Japan
Line: FJ
Profile: Petty/Utility
Edge Length: 154mm
Blade Height: 30mm
Edge Steel: VG-10 
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 40/60
Hand Orientation: Right-Handed
Handle Shape: Octagonal 
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length:.163mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6
Thickness ~1cm from Tip: 0.9mm
Handle Length: 124mm
Total Length: 287mm
Weight: 61g
Saya/Guard: Sold Separately

Brand: Hitohira ひとひら 
Made in: Seki-Gifu, Japan
Line: Hiragana
Profile: Yanagiba
Edge Length: 227mm
Blade Height: 35mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 236mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 115mm
Total Length: 354mm
Weight: 179g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: Imojiya TH
Made in: Seki, Gifu - Japan
Profile: Petty/Utility
Edge Length: 121mm
Blade Height: 27mm
Edge Steel: DSR-1K6 
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: N/A
Spine Length: 128mm
Thickness of Spine at Handle: 1.2mm 
Thickness ½ way: 0.9mm
Thickness ~1cm from Tip: 0.1mm
Handle Length: 116mm
Total Length: 243mm
Weight: 65g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: Imojiya TH
Made in: Seki, Gifu - Japan
Profile: Petty/Utility
Edge Length: 146mm 
Blade Height: 29mm 
Edge Steel: DSR-1K6 
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: N/A
Spine Length: 155mm 
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 1.0mm
Thickness ~1cm from Tip: 0.1mm
Handle Length: 117mm
Total Length: 275mm
Weight: 68g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら
Line: FJ VG-10
Made in: Seki, Gifu - Japan
Profile: Bunka
Edge Length: 172mm
Blade Height: 47mm
Edge Steel: VG-10
Steel Type: Stainless
HRC: 60±0.5
Construction: Zenko (Monosteel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 176mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 120mm
Total Length: 296mm
Weight: 152g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Hiragana 
Made in: Seki, Gifu - Japan
Profile: Deba 
Edge Length: 182mm 
Blade Height: 53mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka 
Ferrule/Bolster Material: N/A
Spine Length: 188mm 
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 4.4mm
Thickness ~1cm from Tip: 2.6mm

Handle Length: 117mm  
Total Length: 306mm
Weight: 297g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: TH
Profile: Bunka
Edge Length: 178mm
Blade Height: 46.5mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Double Bevel (Asymmetrical)
Bevel Symmetry: 20/80
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: Pakka
Spine Length: 185mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: .3mm
Handle Length: 140mm
Total Length: 325mm
Weight: 121g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Made in: Seki-Gifu, Japan
Line: KH
Profile: Sujihiki
Edge Length: 268mm 
Blade Height: 41mm
Edge Steel: Unclassified
Steel Type: Stainless 
Hardness: 60±1HRC 
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30:70
Hand Orientation: Right-Handed  
Handle Shape: Western (Yo)
Handle Material: Imitation Mahogany
Ferrule/Bolster Material: Stainless Steel
Spine Length: 274mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 118mm
Total Length: 389mm
Weight: 185g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: FJ
Made in: Seki, Gifu - Japan
Profile: Petty/Utility
Edge Length: 125mm 
Blade Height: 28mm 
Edge Steel: VG-10
Steel Type: Stainless
HRC: 60±0.5HRC
Construction: Zenko (Mono-Steel)
Cladding: N/A 
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 128mm
Thickness of Spine at Handle: 1.2mm
Thickness ½ way: 0.8mm
Thickness ~1cm from Tip: 0.2mm
Handle Length: 104mm 
Total Length: 232mm 
Weight: 75g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Morihei 森平
Line: INOX
Profile: Honesuki Kaku
Edge Length: 150mm 
Blade Height: 41mm
Edge Steel: SUS-440
Steel Type: Stainless
HRC: 59±1HRC 
Construction: Zenko (Mono-Steel)
Cladding: N/A (Mono-Steel)
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed 
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 152mm 
Thickness of Spine at Handle: 2.4mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 106mm 
Total Length: 260mm 
Weight: 179g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Made in: Seki, Gifu - Japan
Line: Imojiya TH
Profile: Honesuki Kaku
Edge Length: 149mm
Blade Height: 38mm 
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Finish: Migaki (Standard)
Bevel: Double (Asymmetric)
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: N/A
Spine Length: 154mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 130mm
Total Length: 281mm
Weight: 129g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Stainless Steel
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally betwxeen preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: FJ
Made in: Seki-Gifu, Japan 
Profile: Santoku
Edge Length: 175mm 
Blade Height: 46mm 
Edge Steel: VG10 
Steel Type: Stainless
HRC:  60±0.5
Construction: Zenko (Mono-Steel)
Cladding: N/A 
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 177mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 0.9mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 122mm 
Total Length: 297mm 
Weight: 149g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: Hiragana
Made in: Seki, Gifu - Japan 
Profile: Cake Knife
Edge Length: 303mm 
Blade Height: 41mm  
Edge Steel: AUS-8 
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A (Mono-Steel)
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 40/60
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 313mm 
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 132mm 
Total Length: 445mm 
Weight: 240g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.