Sale-able

Brand: K Sabatier
Made in: Thiers - France
Line: Authentique - 1834
Profile: Chef
Edge Length: 250mm
Blade Height: 49mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: Stainless
Total Length: 377mm
Spine Length: 247mm
Thickness of Spine at Handle: 3.1mm
Thickness ½ way: 2.5mmn
Thickness ~1cm from Tip: 1.1mm
Handle Length: 124mmn
Weight: 255g
Saya/Guard: Leather Sheath

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Nihonko 日本鋼
Profile: Gyuto
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrious
Handle: Pakka Western
Total Length: 370mm
Edge Length: 240mm
Spine Length: 245mm
Blade Height: 50mm
Thickness at Spine: 2.1mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 0.9mm 
Handle Length: 120mm
Weight: 217g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: K Sabatier
Made in: Thiers - France
Line: Authentique - 1834
Profile: Slicer
Edge Length: 244mm
Blade Height: 31mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: Stainless
Total Length: 364mm
Spine Length: 242mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.3mmn
Thickness ~1cm from Tip: 0.7mmn
Handle Length: 117mm
Weight: 170g
Saya/Guard: Leather Sheath

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Morihei 森平 
Line: Hisamoto INOX
Profile: Gyuto
Edge Length: 
Edge Steel: SUS-440
Steel Type: Stainless Steel
HRC: 58-60
Cladding: N/A, Monosteel
Bevel: Double Bevel
Bevel Symmetry: Asymmetric 60:40 Right
Hand Orientation: Right Handed
Handle: Pakka Western
Total Length: 
Spine Length: 
Blade Height: 
Thickness: 
Handle Length: 
Weight: 
Final Edge: Morihei 森平

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Vintage Swedish Carbon
Profile: Gyuto
Edge Steel: K-121
Steel Type: Carbon
Cladding: N/A
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrious
Handle: Rosewood Western
Total Length: 365mm
Edge Length: 243mm
Spine Length: 245mm
Blade Height: 46mm
Thickness at Spine: 1.8mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 120mm
Weight: 177g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

This knife is vintage and may include slight scratches, tarnish spots, etc. that it may have picked up over the decades.

Brand: Ryusen 株式会社 龍泉刃物
Line: Tangan Ryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Maple Hybrid Western
Total Length: 379mm
Edge Length: 231mm
Spine Length: 250mm
Blade Height: 46.5mm
Thickness at Spine: 2.2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 126mm
Weight: 217g

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

60HRC Hardness

Brand: Ryusen  株式会社 龍泉刃物
Line: Botenunryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric 
Handle: Black Pakka Western
Total Length: 370mm
Edge Length: 240mm
Spine Length: 245mm
Blade Height: 48mm
Thickness at Spine: 3.1mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 125mm
Weight: 236g

Brand: Sakai Kikumori 堺菊守
Made in: Hitoyoshi-city, Kumamoto - Japan
Maker: Minomo Kajiya 蓑毛鍛冶屋
Line: MK
Profile: Gyuto
Edge Length: 248mm
Blade Height: 56.4mm
Edge Steel: Aogami #2/Blue #2
Steel Type: Carbon
Grind: Flat
Construction: Awase/San-Mai
Cladding: Soft Iron
Finish: Kurouchi (forge finish), Tsuchime (hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal Wa
Handle Material: Oak
Ferrule/Bolster Material: N/A
Total Length: 400mm
Spine Length: 265mm
Thickness of Spine at Handle: 4.1mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 1mm
Handle Length: 140mm
Weight: 257g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Line: Gokujyo 極上
Profile: Gyuto
Edge Steel: White #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Ho Wood Wa
Total Length: 382mm
Edge Length: 227mm
Spine Length: 243mm
Blade Height: 50mm
Thickness at Spine: 3mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 139mm
Weight: 174g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: FJ
Producing Area: Seki-Gifu/ Japan
Profile: Gyuto
Edge Steel: VG-10
Steel Type: Stainless
Cladding: N/A Mono-Steel
Bevel: Double
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle: Ho Wood & Buffalo Horn Ferrule Octagonal
Total Length: 386mm
Edge Length: 231mm
Spine Length: 246mm
Blade Height: 50mm
Thickness at Spine: 2.3mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 140mm
Weight: 156mm
Saya: Sold Separately

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Chef
Edge Length: 260mm
Blade Height: 49mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Coral Wood
Ferrule/Bolster Material: Stainless
Total Length: 391mm
Spine Length: 261mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 125mm
Weight: 275g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made In: Sanjo, Niigata - Japan
Profile: Gyuto
Edge Length: 245mm
Edge Steel: Blue #2
Steel Type: Stainless Steel
Cladding: Stainless Kurouchi
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Japanese Wa Walnut and Bird's Eye Maple Ferrule
Total Length: 398mm
Spine Length: 261mm
Blade Height: 51mm
Thickness of Spine at Handle: 5.2mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 136mm
Weight: 210g
Saya/Guard: Sold Separately 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care advisement: This blade has a carbon steel core and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

60HRC Hardness

Brand: Ryusen 株式会社 龍泉刃物
Line: Tangan Ryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Micarta Hybrid Western
Total Length: 379mm
Edge Length: 231mm
Spine Length: 250mm
Blade Height: 46.5mm
Thickness at Spine: 2.2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 126mm
Weight: 217g

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in: Japan
Line: Futana Ginsan Nashiji
Profile: Gyuto
Edge Length: 244mm
Blade Height: 49mm
Edge Steel: Ginsanko
Steel Type: Stainless
Grind: Convex
Construction: Awase/Clad, San-Mai
Cladding: Soft Stainless
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Black Pakka
Ferrule/Bolster Material: Stainless
Total Length: 375mm
Spine Length: 245mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 124mm
Weight: 225g
Saya/Guard: Purchased Separately 

Brand: K Sabatier
Made in: Thiers - France
Line: Proxus
Profile: Chef
Edge Length: 213mm
Blade Height: 47mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Satin
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: Stainless
Total Length: 34mm
Spine Length: 210mm
Thickness of Spine at Handle: 3.0mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 129mm
Weight: 266g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Ryusen 株式会社 龍泉刃物
Line: Tangan RYU
Profile: Sujihiki
Edge Steel: VG10
Steel Type: Stainless
Cladding: Soft Stainless
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Maple Western
Total Length: 377mm
Edge Length: 235mm
Spine Length: 250mm
Blade Height: 37mm
Thickness at Spine: 2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.6mm 
Handle Length: 125mm
Weight: 167g
Saya: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Made in: Seki-Gifu, Japan
Line: Hiragana
Profile: Yanagiba
Edge Length: 227mm
Blade Height: 35mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 236mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 115mm
Total Length: 354mm
Weight: 179g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Smith: Tanaka Uchihamono 田中打刃物
Made in: Sakai, Osaka - Japan
Line: Kikuzuki Uzu
Profile: Gyuto
Edge Length: 221mm
Blade Height: 51mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Iron
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster: Black Buffalo Horn
Total Length: 377mm
Spine Length: 243mm
Thickness of Spine at Handle: 3.2mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 0.9mm 
Handle Length: 134mm
Weight: 192g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Ryusen  株式会社 龍泉刃物
Made in: Echizen, Japan
Line: Botenunryu KAI
Profile: Gyuto
Edge Length: 239mm
Blade Height: 49.3mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (clad), San Mai
Cladding: Soft Stainless
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Quince and blue dyed maple spacer
Ferrule/Bolster Material: Buffalo horn
Spine Length: 257mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: .3mm 
Handle Length: 136mm
Total Length: 394mm
Weight: 165g
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Made in: Seki-Gifu, Japan
Line: HG
Profile: Gyuto/Chef
Edge Length: 246mm
Blade Height: 50mm
Edge Steel: Unclassified
Steel Type: Stainless Steel
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 255mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 145mm
Total Length: 402mm
Weight: 139g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.