Sale-able

Brand: Hitohira ひとひら (一片) 
Line: Futana
Profile: Bunka
Edge Steel: Ginsanko
Steel Type: Stainless
Cladding: Soft Stainless Nashiji
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal
Total Length: 322mm
Edge Length: 175mm 
Spine Length:  187mm
Blade Height: 43mm
Spine Thickness: 1.8mm
Handle Length: 135mm
Weight: 117g 
Saya: Purchased Separately. 

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Morihei 森平
Line: Hisamoto INOX
Profile: Santoku
Edge Steel: SUS-440
Steel Type: Stainless
Cladding: N/A, Monosteel
Bevel: Double Bevel
Bevel Symmetry: 60/40
Hand Orientation: Right Handed
Handle: Pakka Western
Total Length: 287mm
Edge Length: 165mm
Spine Length: 170mm
Blade Height: 47mm
Thickness: 1.5mm
Handle Length: 115mm
Weight: 150g

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

CARE ADVISEMENTS

This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made In: Japan
Line: Imojiya MZ VG1
Profile: Nakiri
Edge Length: 160mm
Blade Height: 46mm
Edge Steel: VG1
Steel Type: Stainless
Cladding: Stainless Cladding
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle:  Western Pakka
Total Length: 289mm
Spine Length: 170mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 118mm
Weight: 172g
Saya/Guard: Purchase Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Santoku
Steel Type: Unclassified Stainless 
Cladding: Stainless Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Pakka Western
Total Length: 295mm
Edge Length: 171mm
Spine Length: 174mm
Handle Length: 118mm
Blade Height: 51mm
Thickness of Spine at Handle: 1.6mm
Thickness of Spine Half Way: 1.5mm
Thickness of Spine ~1cm from Tip: 0.9mm
Weight: 157g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira
Line: T10
Profile: Gyuto
Edge Length: 181mm
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western 
Total Length: 306mm 
Spine Length: 187mm 
Blade Height: 42mm 
Thickness at Spine: 1.7mm 
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.6
Handle Length: 120mm 
Weight: 134g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: 200
Profile: Chef
Edge Length: 
Blade Height: 
Edge Steel: 14C28N
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: G10
Ferrule/Bolster Material: N/A
Total Length: 
Spine Length: 
Thickness of Spine at Handle: 
Thickness ½ way: 
Thickness ~1cm from Tip: 
Handle Length: 
Weight: 
Saya/Guard: Leather Sleeve

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片) 
Line: Futana - Super Blue
Profile: Bunka
Edge Length: 174mm 
Edge Steel: Blue (Aogami) Super
Steel Type: Carbon 
HRC: 62-64
Cladding: Stainless Kurouchi Tsuchime
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal 
Total Length: 320mm
Spine Length:  187mm
Blade Height: 43mm
Thickness: 2.1mm
Handle Length: 134mm
Weight: 122g
Saya: N/A

CARE ADVISEMENTS

This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Producing Area: Echizen, Fukui - Japan 
Line: GR
Profile: Santoku
Edge Length: 165mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Octagonal Rosewood Handle, Pakka Ferrule
Total Length: 304mm
Spine Length:178mm
Handle Length: 127mm
Blade Height: 45mm
Thickness of Spine at Handle: 2.6mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.5mm
Weight: 122g
Saya/Guard: Sold Separately 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片) 
Line: HG Tsuchime Damascus
Profile: Santoku
Steel Type: Unclassified Stainless 
Cladding: Stainless Tsuchime Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Imitation Mahogany, Western
Total Length: 307mm 
Edge Length: 185mm 
Spine Length: 184mm 
Handle Length: 128mm 
Blade Height: 45mm 
Thickness of Spine at Handle: 1.6mm 
Thickness of Spine Half Way: 1.6mm 
Thickness of Spine ~1cm from Tip: 1.2mm 
Weight: 177g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: TD
Profile: Nakiri
Edge Steel: Blue #2
Steel Type: Carbon
Cladding: Stainless Cladding
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Walnut Wa
Total Length: 310mm
Edge Length: 163mm
Spine Length: 185mm
Blade Height: 52mm
Spine Thickness at Handle: 5.2mm
Spine Thickness 1cm from Tip: 1.6mm
Handle Length: 1.3mm
Handle Length: 125mm
Weight: 146g
Saya: Sold Separately 

Brand: Ryusen 株式会社 龍泉刃物
Line: TANGANRYU
Profile: Santoku
Edge Steel: VG-10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Micarta Hybrid
Total Length: 315mm
Edge Length: 170mm
Spine Length: 171mm
Blade Height: 46mm
Thickness at Spine: 2.4mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 125mm
Weight: 203g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: TP 
Profile: Gyuto
Edge Length: 182mm
Edge Steel: SG2 
Steel Type: Stainless  
Cladding: Soft Stainless 
Bevel: Double Bevel 
Bevel Symmetry: 50/50 
Hand Orientation: Ambidextrous 
Handle: Western, Red Wine Pakka 
Total Length: 307mm
Spine Length: 186mm
Handle Length: 120mm
Blade Height: 44mm
Thickness of Spine at Handle: 1.5mm
Thickness of Spine Half Way: 1.4mm
Thickness of Spine ~1cm from Tip: 0.7mm
Weight: 144g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in: Miki, Hyogo-Japan
Line: Harima
Profile: Santoku
Edge Length: 164mm
Blade Height: 44.5mm
Edge Steel: Aogami #2 (blue #2)
Steel Type: Carbon
Construction: Awase San-Mai
Cladding: Soft Stainless
Finish: Kurouchi
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Oval Octagonal Walnut w/ Pakka Ferrule
Total Length: 302mm
Spine Length: 175mm
Thickness of Spine at Handle: 3.2mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: .9mm
Handle Length: 128mm
Weight: 132mm
Saya/Guard: Sold Seperately


Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片) 
Line: HG Tsuchime Damascus
Profile: Nakiri
Steel Type: Unclassified Stainless 
Cladding: Stainless Tsuchime Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Imitation Mahogany, Western
Total Length: 288mm 
Edge Length: 160mm 
Spine Length: 170mm 
Handle Length: 117mm 
Blade Height: 45mm 
Thickness of Spine at Handle: 1.8mm 
Thickness of Spine Half Way: 1.5mm 
Thickness of Spine ~1cm from Tip: 1.5mm 
Weight: 187g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.