Petty/Utility

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Classic Range 
Profile: Petty/Utility
Edge Length: 123mm
Blade Height: 33mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi, Nashiji, Damascus, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: English Walnut Handle
Ferrule/Bolster Material: Copper
Spine Length: 136mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 119 mm
Total Length: 250mm 
Weight: 112g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Petty
Edge Length: 127mm 
Blade Height: 36mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 140mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 113mm
Total Length: 252mm
Weight: 115g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Goyon-Chazeau
Made in: Thiers - France
Line: Le Grande tradi
Profile: Utility
Edge Length: 125mm
Blade Height: 34.5mm
Edge Steel: 14C28N
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Satin
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Ebony w/ Sapwood
Ferrule/Bolster Material: N/A
Total Length: 237mm
Spine Length: 125mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 112mm
Weight: 93g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Goyon-Chazeau
Made in: Thiers - France
Line:  P'tit tradi
Profile: Utility
Edge Length:  98mm
Blade Height:  22mm
Edge Steel: 14C28N
Steel Type: Stainless 
Construction: Mono-Steel
Cladding: N/A 
Finish: Satin
Bevel: Double 
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Western  
Handle Material: Ebony w/ Sapwood
Ferrule/Bolster Material: N/A
Total Length: 200mm
Spine Length: 98mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 102mm
Weight: 50g
Saya/Guard: Sold Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Futana SB
Profile: Petty
Edge Length: 140mm
Blade Height: 28mm
Edge Steel: Super Aogami (Super Blue)
Steel Type: Carbon
HRC: 61±1
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Kurouchi (Forge Finish), Tsuchime (Hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherrywood
Ferrule/Bolster Material: Ebony
Spine Length: 154mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 125mm
Total Length: 278mm
Weight: 66g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement:  This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: HG
Profile: Petty
Edge Length: 155mm
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry wood
Total Length: 282mm
Spine Length: 162mm
Handle Length: 125mm
Blade Height: 29mm
Thickness of Spine at Handle: 1.7mm
Thickness of Spine Half Way: 1.5mm
Thickness of Spine ~1cm from Tip: 0.7mm
Weight: 65g
Saya/Guard: No

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: Hinode
Made in: Sanjo, Niigata - Japan
Smith: Mutsumi Hinoura 日野浦 睦
Profile: Petty/Utility
Edge Length: 196mm
Blade Height: 38.7mm
Edge Steel: Shirogami #2 (white #2)
Steel Type: Carbon
Construction: Awase San-Mai (clad)
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 30:70
Hand Orientation: Ambidextrous
Handle Shape: Oval
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 210mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: .2mm
Handle Length: 134mm
Total Length: 345mm
Weight: 127g
Saya/Guard: Sold Separately

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: TH
Profile: Petty/Utility
Edge Length: 118mm
Blade Height: 27.5mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Finish: Migaki (Standard)
Bevel: Double (Asymmetric)
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: Pakka
Spine Length: 130mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: .3mm
Handle Length: 115mm
Total Length: 246mm
Weight: 67g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Producing Area: Seki, Gifu - Japan
Profile: Petty
Steel Type: Stainless Steel
Hand Orientation: Ambidextrous
Steel: VG-10, Stainless Damascus Clad
Handle: Micarta Western
Total Length: 257mm
Edge Length: 151mm
Spine Length: 155mm
Blade Height: 32mm
Thickness of Spine at Handle: 1.8mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.1mm
Handle Length: 100mm
Weight: 96g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Imojiya VG-10 
Smith: Seto 瀬戸 
Producing Area: Seki-Gifu/ Japan 
Profile: Utility
Edge Length: 136mm
Edge Steel: VG-10
Steel Type: Stainless 
Hardness: 60-61HRC
Cladding: Stainless Tsuchime Damascus 
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka & Pakka Ferrule Octagonal 
Total Length: 255mm
Spine Length: 140mm
Blade Height: 34mm
Thickness: 1.7mm
Handle Length: 114mm
Weight: 94g
Saya/Guard: Sold Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: Imojiya TH
Profile: Petty
Edge Length: 148mm
Blade Height: 29.5mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A Mono-Steel
Finish: Migaki (standard)
Bevel: Double Bevel (asymmetric)
Bevel Symmetry: 30/70
Hand Orientation: Ambidextrous
Handle Shape: Western (yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 148mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: .2mm
Handle Length: 115mm
Total Length: 257mm
Weight: 88mm
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片
Made in: Seki-Gifu/ Japan
Line: Imojiya TH
Profile: Petty
Edge Length: 112mm
Blade Height: 27mm
Edge Steel: VG-10
Steel Type: Stainless Steel 
Construction: Awase, San Mai
Cladding: Stainless Clad 
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal 
Handle Material: Pakka 
Ferrule/Bolster Material: Pakka 
Spine Length: 128mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 115mm
Total Length: 243mm
Weight: 73g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Producing Area: Echizen-Fukui/ Japan
Profile: Petty
Size: 130mm
Steel Type: Stainless Steel
Steel: V10 Special, Soft Stainless Clad
Handle: Pakka Western
Total Length: 245mm
Edge Length: 134mm
Handle to Tip Length: 136mm
Blade Height: 27mm
Thickness: 1.2mm
Handle Length: 110mm
Weight: 70g
Hand Orientation: Ambidextrous
Hardness: 61-62HRC

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Tosa-Kochi/ Japan
Line: Tosa
Profile: Petty 
Edge Length: 136mm
Blade Height: 36mm
Edge Steel: Blue (Aogami) #2
Steel Type: Carbon Steel 
Construction: Awase, San Mai
Cladding: Soft Iron
Finish: Kurouchi 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Walnut 
Ferrule/Bolster Material: Rengas
Spine Length: 150mm
Thickness of Spine at Handle: 3.9mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 115mm
Total Length: 263mm
Weight: 69g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: K Sabatier
Made in: Thiers - France
Line: Authentique - Carbon
Profile: Paring
Edge Length: 97mm
Blade Height: 23mm
Edge Steel: XC75
Steel Type: Carbon Steel
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: Carbon Steel
Total Length: 198mm
Spine Length: 95mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 97mm
Weight: 69g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Ryusen  株式会社 龍泉刃物
Made in: Echizen, Japan
Line: Botenunryu KAI
Profile: Petty/Utility
Edge Length: 136mm
Blade Height: 27mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase (clad), San Mai
Cladding: Soft Stainless
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Quince and blue dyed maple spacer
Ferrule/Bolster Material: Buffalo horn
Spine Length: 147mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: .6mm
Handle Length: 116mm
Total Length: 260mm
Weight: 60g
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Ryusen 株式会社 龍泉刃物
Line: Tangan Ryu
Profile: Petty/Utility
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric 
Handle: Black Micarta 
Total Length: 264mm
Edge Length: 145mm
Spine Length: 155mm
Blade Height: 29mm
Thickness at Spine: 2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.7mm
Handle Length:  107mm
Weight: 90g

Brand: Ryusen 株式会社 龍泉刃物
Line: Tangan Ryu
Profile: Petty/Utility
Edge Steel: VG10
Steel Type: Stainless 
Hardness: 60HRC
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric 
Handle: Curly Maple
Total Length: 268mm
Edge Length: 146mm
Spine Length: 162mm
Blade Height: 31mm
Thickness at Spine: 2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1mm
Handle Length:  105mm
Weight: 75g